ST Manuals

This document describes the features and characteristics of the STP22NM50 and STB22NM50 series N-channel power MOSFETs, such as low on-resistance, high dv/dt, and excellent avalanche capabilities.

STF2222A is a small signal NPN transistor, SOT-89 plastic package, with high gain and low saturation voltage. It is suitable for small load switching transistors in portable equipment.

STB21NM50N is a N-channel 500V-0.15Ω-18A MOSFET from ST company, using the second generation MDmesh technology, with 100% avalanche tested, low input capacitance and gate charge, low gate input resistance, suitable for high efficiency converters.

The STP20NM60FD / STF20NM60D / STW20NM60FD is a N-channel 600V - 0.26Ω - 20A TO-220/TO-220FP/TO-247 FDmesh™ POWER MOSFET (with FAST DIODE) with typical RDS(on) = 0.26Ω, high dv/dt and avalanche capabilities, 100% avalanche tested, low input capacitance and gate charge, low gate input resistance, tight process control and high manufacturing yields. It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. Applications include ZVS phase-shift full bridge converters for SMPS and welding equipment.

This document describes the features and characteristics of the 1/9 May 2005 STF24NF12 N-CHANNEL 120V - 0.070Ω - 24A - TO-220FP low gate charge STripFET™II MOSFET.

This document describes the STP20NF06 and STF20NF06 N-channel power MOSFET models produced by STMicroelectronis. These MOSFETs have low on-resistance, rugged avalanche characteristics, high operating temperature, and high dv/dt capability. They are suitable for applications such as DC motor control and DC-DC, DC-AC converters.

The STP20N20 STF20N20 - STD20N20 from STMicroelectronics is an N-channel 200V MOSFET with low gate charge and exceptional dv/dt capability. It is suitable as a primary switch in high-efficiency isolated DC-DC converters.

This data brief introduces the STEVAL-MKI006V1 evaluation board, which is based on the LIS302DL low power 3-axis linear accelerometer with digital output. The board includes a sensing element and an IC interface capable of translating information from the sensing element into a measured signal that can be used for external applications. In addition to the MEMS sensor, the evaluation board utilizes an ST7-USB microcontroller which functions as a bridge between the sensor and the PC, on which it is possible to use the graphical user interface (GUI) included with the kit or dedicated software routines for customized applications.

This document is a technical brief for STEVAL-MKI009V1 Adapter Board, which is based on LIS3LV02DL 3-axis digital output linear accelerometer and is intended to provide the user with an effective solution for fast system prototyping and device evaluation directly within the user’s application.

The STEVAL-PCC002V1 is a low-speed USB to serial bridge based on ST7263B. It features PC executable software for HID communication, CTS/RTS flow control, two LEDs to indicate traffic direction, in-circuit programming capability through ICC connector, and wrapping area capability with access to MCU I/Os.

This is a data brief for STEVAL-CCA001V1 mono class audio amplifier. It introduces the features of the amplifier, including operating voltage range, power consumption, input output impedance, startup time, etc.

This document describes the features and characteristics of the STMicroelectronics VN340 high-side driver, including compliance with IEC 61000-4-4, IEC 61000-4-5, and IEC 61000-4-6 standards, 8 channels with 0.5A per channel, DC/DC converter, excellent thermal behavior, power supply up to 35V, and very low standby current.

This data brief details the features of the PCLT-2A sensor input termination. The PCLT-2A is a dual termination device for the front-end of a 24 V DC digital input module. Composed of an input-voltage protection, a serial current-limiter circuit and an output driver, each channel circuit terminates the connection between a high-side proximity sensor and the I/O module. Because of its IEC type programmability and the isolated/non-isolated output options, the PCLT offers a flexible and easy-to-design solution for highly integrated I/O modules.

This is an evaluation board for controlling permanent magnet motors.

This product is a temperature sensor board based on STLM75/STDS75 and ST72F651AR6, featuring ST72F651 microcontroller for temperature monitoring, data logging and fan speed regulation, and USB-powered board capable of working in stand-alone mode using the GUI