National Semiconductor manuals, page 31
National Semiconductor LMV431/LMV431A/LMV431B Low-Voltage (1.24V) Adjustable Precision Shunt Regulators Data Sheet
National Semiconductor CLC111 Ultra High Slew Rate Closed Loop Buffer Data Sheet
CLC111 is a high performance, closed loop, monolithic buffer designed by National Semiconductor for applications requiring very high frequency signals. This device's high performance includes an extremely fast 800MHz small signal bandwidth (0.5pp) and an ultra high (3500V/µs) slew rate while requiring only 10.5mA quiescent current. Signal fidelity is maintained with low harmonic distortion (−62dBc 2nd and 3rd harmonics at 20MHz). These performance characteristics are for a demanding 100Ω load. Featuring a patented closed loop design, the CLC111 offers nearly ideal unity gain (0.996) with a very low (1.4Ω) output impedance. The CLC111 is ideally suited for buffering video signals with its 0.15%/0.04˚ differential gain and phase performance at 4.43MHz. Power sensitive applications will benefit from the CLC111's excellent performance on reduced or single supply voltages. Constructed using an advanced, complementary bipolar process and National Semiconductor's proven high performance architectures, the CLC111 is available in several versions to meet a variety of requirements. Enhanced Solutions (Military/Aerospace) SMD Number: contact factory Space level versions also available. For more information, visit http://www.national.com/mil.
National Semiconductor LM3420-4.2 -8.2 -8.4 -12.6 -16.8 Lithium-Ion Battery Charge Controller Data Sheet
The LM3420 series of controllers are monolithic integrated circuits designed for charging and end-of-charge control for Lithium-Ion rechargeable batteries.
National Semiconductor CD4009M/CD4009C Hex Buffers (Inverting) CD4010M/CD4010C Hex Buffers (Non-Inverting) Data Sheet
TL�F�5945 CD4009M�CD4009C Hex Buffers (Inverting) CD4010M�CD4010C Hex Buffers (Non-Inverting) are monolithic complementary MOS (CMOS) integrated circuits produced by TI. These circuits have high noise immunity and low power consumption. They can be used as hex buffers, CMOS to DTL or TTL interface or CMOS current drivers.
National Semiconductor ADC088S102 8-Channel 500 kSPS to 1 MSPS 8-Bit A/D Converter handbook
The ADC088S102 is a low-power, eight-channel CMOS 8-bit analog-to-digital converter from ADI. This device is based on a successive-approximation register architecture with an internal track-and-hold circuit and supports conversion rates of 500 kSPS to 1 MSPS. It can be configured to accept up to eight input signals and outputs serial data in straight binary format. The ADC088S102 supports independent analog and digital supplies, with a range of +2.7V to +5.25V for the analog supply (VA) and a range of +2.7V to VA for the digital supply (VD). In normal operation, the device consumes 1.8 mW and 8.0 mW of power with a +3V or +5V supply, respectively. The power-down feature reduces the power consumption to 0.03 µW and 0.15 µW with a +3V and +5V supply, respectively. The ADC088S102 is packaged in a 16-lead TSSOP package and is guaranteed to operate over an extended industrial temperature range of -40˚C to +105˚C.
National Semiconductor LM2727/LM2737 N-Channel FET Synchronous Buck Regulator Controller for Low Output Voltages handbook
The LM2727/LM2737 N-Channel FET Synchronous Buck Regulator Controller for Low Output Voltages is a high-performance, synchronous switching regulator controller released by Texas Instruments. It adopts a fixed-frequency, voltage-mode, PWM control architecture and can adjust the switching frequency from 50kHz to 2MHz by adjusting an external resistor. The device uses non-overlapping MOSFET gate drivers and a high-side bootstrap structure to further improve efficiency. The input power is 2.2V to 16V and the output voltage can be adjusted to 0.6V.
National Semiconductor LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators handbook
The LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators are developed on a CMOS process which allows low quies- cent current operation independent of output load current. These ultra low dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low voltage microprocessor applications.
National Semiconductor LM6118/LM6218 Fast Settling Dual Operational Amplifiers Data Sheet
LM6118/LM6218 are monolithic fast-settling unity-gain-compensated dual operational amplifiers with ±20 mA output drive capability. The PNP input stage has a typical bias current of 200 nA, and the operating supply voltage is ±5V to ±20V. These dual op amps use slew enhancement with special mirror circuitry to achieve fast response and high gain with low total supply current. The amplifiers are built on a junction-isolated VIP™ (Verti- cally Integrated PNP) process which produces fast PNP’s that complement the standard NPN’s.
National Semiconductor LM6165/LM6265/LM6365 High Speed Operational Amplifier Data Sheet
The LM6165 family of high-speed amplifiers delivers an excellent speed-power product with a speed of 300 V/µs and a gain bandwidth product of 725 MHz (stable for gains as low as +25) with only 5 mA of supply current. These amplifiers are built using National's VIP™ (Vertically Integrated PNP) process, which produces fast PNP transistors that are true complements to the already fast NPN devices. This advanced junction-isolated process provides high-speed performance without the need for complex and expensive dielectric isolation.
National Semiconductor LM4992 420mW Stereo Cell Phone Audio Amplifier Data Sheet
The LM4992 is a 420mW stereo cell phone audio amplifier designed by Texas Instruments for demanding applications in mobile phones and other portable communication device applications. It can deliver 1 watt per channel of continuous average power to an 8 ohm BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.
National Semiconductor MM5486 LED Display Driver handbook
The MM5486 is a National Semiconductor LED display driver that uses N-channel metal gate low-threshold enhancement mode and ion-implanted depletion mode devices. It is available in a 40-pin molded dual-in-line package. The MM5486 is designed to drive common anode-separate cathode LED displays. A single pin controls the LED display brightness by setting a reference current through a variable resistor connected to VDD.
National Semiconductor COP8ACC5 handbook
The COP8ACC5 is an 8-bit CMOS ROM-based microcontroller with 4k memory and a high-resolution A/D. It is a single-chip CMOS device suitable for applications requiring a full-featured, low EMI controller with A/D capability. It also features advanced functions such as a 16-bit timer/counter, MICROWIRE/PLUS serial I/O, and low power modes. The devices in this series support low EMI operation from 2.5V to 5.5V and are available in 20/28 pin packages.
National Semiconductor LM3710/LM3711 handbook
The LM3710/LM3711 series of microprocessor supervisory circuits provide the maximum flexibility for monitoring power supplies and battery controlled functions in systems without backup batteries
National Semiconductor LM3478 handbook
The LM3478 is a high efficiency, low side N-channel switching regulator controller from TI. It is suitable for use in topologies requiring low side FET, such as boost, flyback, SEPIC, etc. The device operates at extremely high switching frequency, and has built in features such as thermal shutdown, short-circuit protection, over voltage protection, etc.
National Semiconductor LM34/LM34A/LM34C/LM34CA/LM34D handbook
LM34/LM34A/LM34C/LM34CA/LM34D Precision Fahrenheit Temperature Sensors