Texas Instruments manuals, page 52
TEXAS INSTRUMENTS CY54/74FCT240T CY54/74FCT244T handbook
This datasheet provides information on the features, pinout, speed, drive capability, temperature range, and power supply voltage of the CY54/74FCT240T and CY54/74FCT244T
TEXAS INSTRUMENTS CD4027B CMOS Dual J-K Master-Slave Flip-Flop
This document describes the features and characteristics of the CD4027B products, as well as supplier information for different package types.
TEXAS INSTRUMENTS PTN78020A handbook
The PTN78020A is a series of high-efficiency buck-boost-integrated switching regulators (ISR), that represent the third generation in the evolution of high-performance power modules designed for industrial use. The wide-input voltage range makes these modules suitable for a variety of applications that operate off 12–V, 24–V, and tightly-regulated 28–V dc power. In new designs, they should be considered in place of the PT6640 and PT78NR100 series of single in-line pin (SIP) products. The PTN78020A is smaller and lighter than its predecessors.
TEXAS INSTRUMENTS PCM1748 handbook
PCM1748 is a 24-bit digital-to-analog converter chip from Texas Instruments, with 8-level amplitude quantization and fourth-order noise shaping technology, supporting 16- to 24-bit data and supporting 5kHz to 100kHz sampling rates.
TEXAS INSTRUMENTS MN674A Data Sheet
TEXAS INSTRUMENTS TLV2460 Data Sheet
The TLV246x is a family of low-power rail-to-rail input/output operational amplifiers specifically designed for portable applications. The amplifier has 6.4 MHz of bandwidth and 1.6 V/µs of slew rate with only 500 µA of supply current, providing good ac performance with low power consumption. Three members of the family offer a shutdown terminal, which places the amplifier in a low-power mode.
TEXAS INSTRUMENTS UC1842/3/4/5 Data Sheet
The UC1842/3/4/5 family is a current mode PWM controller optimized for off-line and DC to DC converters. It features low start-up current, automatic feed forward compensation, pulse-by-pulse current limiting, enhanced load response characteristics, etc.
TEXAS INSTRUMENTS TPS77501 TPS77515 TPS77518 TPS77525 TPS77533 WITH RESET OUTPUT TPS77601 TPS77615 TPS77618 TPS77625 TPS77628 TPS77633 WITH PG OUTPUT FAST-TRANSIENT-RESPONSE 500-mA LOW-DROPO
This document describes the features and characteristics of the TPS775xx and TPS776xx series products, including fast transient response, 500mA low-dropout voltage regulator, adjustable and fixed output versions, etc.
TEXAS INSTRUMENTS TPS75515 TPS75518 TPS75525 TPS75533 WITH POWER GOOD AND TPS75501 FAST-TRANSIENT RESPONSE 5-A LOW-DROPOUT VOLTAGE REGULATORS handbook
This document introduces the TPS755xx family of 5A low dropout regulators, which includes four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 5A of output current with a dropout of 250mV (TPS75533). Therefore, the device is capable of performing a 3.3V to 2.5V conversion. At full load, quiescent current is 125µA and drops down to less than 1µA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes.
TEXAS INSTRUMENTS TPS60300 TPS60301 TPS60302 TPS60303 SINGLE-CELL TO 3.0-V/3.3-V 20-mA DUAL OUTPUT HIGH-EFFICIENCY CHARGE PUMP handbook
The TPS6030x is a high-efficiency charge pump that converts a single-cell voltage to 3.0V/3.3V. It features a regulated 3V or 3.3V output voltage with up to 20mA output current. It is optimized for 1.2V battery voltage and achieves up to 90% power conversion efficiency. The product does not require an inductor and only needs five small 1uF ceramic capacitors to build a complete high-efficiency DC/DC charge pump converter.
TEXAS INSTRUMENTS TPS54073 handbook
The document introduces TPS54073, a low-input voltage, high-output current synchronous buck PWM converter. It features 8-mΩ MOSFET switches for high efficiency operation. The converter integrates all required active components, including a true high-performance voltage error amplifier, undervoltage-lockout circuit, internally/externally set slow-start circuit, and power good output.
TEXAS INSTRUMENTS TPS2398 TPS2399 handbook
This file is the application guide for TPS2398/TPS2399, introducing the main features and application scenarios of the product
TEXAS INSTRUMENTS TPS2220A TPS2223A TPS2224A TPS2226A handbook
The TPS2223A, TPS2224A, and TPS2226A CardBus™ power-interface switches provide an integrated power-management solution for two PC Card sockets. The TPS2220A is a single-slot option for this family of devices. These devices allow the controlled distribution of 3.3 V, 5 V, and 12 V to each card slot. The current-limiting and thermal-protection features eliminate the possibility of card failure due to overcurrent or overheating.
TEXAS INSTRUMENTS TMS320C80 handbook
This document is the datasheet of the TMS320C80 digital signal processor from 1997, which describes the features and characteristics of the processor. The processor is a single-chip parallel multiple instruction/multiple data (MIMD) DSP capable of executing over two billion RISC-equivalent operations per second. It includes a master processor (MP), four parallel processors (PP), a transfer controller (TC), and a video controller (VC) among other components. It features a 32-bit RISC processor, IEEE-754 floating-point capability, instruction cache, data cache, and more. It also supports big-endian or little-endian operation, has 50K bytes of on-chip RAM, a 4G-byte address space, a 16.6-ns cycle time, and operates at 3.3V.
TEXAS INSTRUMENTS TLV2352 TLV2352Y LinCMOS DUAL LOW-VOLTAGE DIFFERENTIAL COMPARATORS handbook
TLV2352 consists of two independent, low-power comparators specifically designed for single power-supply applications and operates with power-supply rails as low as 2V. When powered from a 3V supply, the typical supply current is only 120µA. TLV2352 is designed using the Texas Instruments LinCMOS technology and therefore features an extremely high input impedance (typically greater than 1012Ω), which allows direct interfacing with high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup resistor to provide a positive output voltage swing, and they can be connected to achieve positive-logic wired-AND relationships.