Texas Instruments manuals, page 53
TEXAS INSTRUMENTS TLC2652 TLC2652A TLC2652Y Advanced LinCMOS PRECISION CHOPPER-STABILIZED OPERATIONAL AMPLIFIERS handbook
TLC2652, TLC2652A, TLC2652Y Advanced LinCMOS PRECISION CHOPPER-STABILIZED OPERATIONAL AMPLIFIERS
TEXAS INSTRUMENTS TL322C TL322I DUAL LOW-POWER OPERATIONAL AMPLIFIERS handbook
tl322c, tl322i low-power operational amplifiers datasheet
TEXAS INSTRUMENTS THS4211 THS4215 handbook
The THS4211 is a low distortion, high speed, voltage feedback amplifier from TI that features unity gain stability, wide bandwidth (1GHz), high slew rate (970 V/μs), low distortion (-90 dBc THD @ 30 MHz) and high output drive (IO = 200 mA).
TEXAS INSTRUMENTS THS4011 THS4012 290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS handbook
THS4011/12 290-MHz Low Distortion High-Speed Amplifiers are ideal high performance single/dual channel voltage feedback amplifiers for a wide range of applications.
TEXAS INSTRUMENTS SN54AHCT32 SN74AHCT32 QUADRUPLE 2-INPUT POSITIVE-OR GATES Data Sheet
SN54AHCT32, SN74AHCT32 are quad 2-input positive-OR gates from Texas Instruments. They have TTL-voltage compatibility, 250mA latch-up performance, and 2000V Human-Body Model (A114-A) and 200V Machine Model (A115-A) ESD protection.
TEXAS INSTRUMENTS SN74CBT3257 Data Sheet
SN74CBT3257 is a 4-bit 1-of-2 high-speed TTL-compatible FET multiplexer/demultiplexer.
TEXAS INSTRUMENTS SN74AVCH1T45 Data Sheet
TEXAS INSTRUMENTS SN74AUC1G07 handbook
This document describes a single buffer/driver that is optimized for 1.8V operation and supports mixed-mode signal operation. It features low power consumption, fast transfer speed, and high noise immunity.
TEXAS INSTRUMENTS SN54ALS09 SN74ALS09 handbook
SN54ALS09 and SN74ALS09 are quadruple 2-input positive-AND gates with open-collector outputs. They can be used to perform the Boolean functions Y = A • B or Y = A + B in positive logic. The open-collector outputs require pullup resistors to perform correctly. These outputs may be connected to other open-collector outputs to implement active-low wired-OR or active-high wired-AND functions. Open-collector devices are often used to generate higher VOH levels. The SN54ALS09 is characterized for operation over the full military temperature range of –55°C to 125°C. The SN74ALS09 is characterized for operation from 0°C to 70°C.
TEXAS INSTRUMENTS SN5410 SN54LS10 SN54S10 SN7410 SN74LS10 SN74S10 handbook
The document describes the features and characteristics of triple 3-input positive-NAND gates of SN5410, SN54LS10, SN54S10, SN7410, SN74LS10, SN74S10.
TEXAS INSTRUMENTS PCI2250 Evaluation Module user manual
SCPU005 is the user manual published by Texas Instruments, which introduces the product characteristics of 2000 PCI Bus Solutions.
TEXAS INSTRUMENTS SN54ALS841 SN54AS841 SN54ALS842 SN54AS842 SN74ALS841 SN74AS841 SN74ALS842 SN74AS842 10-BIT BUS INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS handbook
This datasheet introduces the features and characteristics of SN54ALS841/SN54AS841/SN54ALS842/SN54AS842/SN74ALS841/SN74AS841/SN74ALS842/SN74AS842 10-bit bus interface D-type latches.
TEXAS INSTRUMENTS SN54AHC139 SN74AHC139 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS handbook
SN54AHC139 and SN74AHC139 are dual 2-line to 4-line decoders/demultiplexers designed for 2V to 5.5V VCC operation. They are designed for high-speed memory decoding or data transmission systems and incorporate two enable inputs to simplify cascading and/or data reception. They have latch-up performance exceeding 250mA per JESD 17 and ESD protection exceeding JESD 22.
TEXAS INSTRUMENTS SN54ABT16843 SN74ABT16843 18-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS handbook
SN54ABT16843 / SN74ABT16843 18-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS is a product of Texas Instruments company, belonging to the Widebus series. The product uses EPIC-IIB BiCMOS design, which is high performance, low power consumption, and can be used to drive high capacitance or low impedance loads.
TEXAS INSTRUMENTS GC316 Data Sheet