TEXAS Manuals

The CC1010 is a true single-chip UHF transceiver with an integrated high performance 8051 microcontroller with 32 kB of Flash program memory. The RF transceiver can be programmed for operation in the 300 – 1000 MHz range, and is designed for very low power wireless applications.

This document is a data sheet for the LM3S618 microcontroller, providing specifications and descriptions of the product, as well as legal disclaimers and trademark information from Luminary Micro.

This manual provides detailed information on TI's various DSP platforms, products, and software development tools, including the TMS320C6000™ DSP platform, the TMS320C5000™ DSP platform, and the TMS320C2000™ DSP platform, as well as eXpressDSP™ software and development tools.

The document describes the features and characteristics of the SN54LVC573A and SN74LVC573A octal transparent D-type latches. These devices feature 3-state outputs, operate from 1.65V to 3.6V VCC, accept input voltages up to 5.5V, and provide excellent ESD protection and noise immunity.

The SN54ALS273 and SN74ALS273 are octal positive-edge-triggered flip-flops from Texas Instruments that implement D-type flip-flop logic with a direct-clear (CLR) input. The flip-flops use TTL circuitry and contain eight single-rail outputs, buffered clock and direct-clear inputs, and individual data inputs to each flip-flop. Applications for the flip-flops include buffer/storage registers, shift registers, and pattern generators. The flip-flops are available in plastic small-outline (DW) packages, ceramic chip carriers (FK), and standard plastic (N) and ceramic (J) 300-mil DIPs.

SN54HC574 and SN74HC574 are octal edge-triggered D-type flip-flops with 3-state outputs. They are suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. They feature high-current 3-state noninverting outputs that can drive bus lines directly or up to 15 LSTTL loads. They have a bus-structured pinout and are available in various package options.

SN54HC174, SN74HC174 are monolithic positive-edge-triggered D-type flip-flops with a direct clear (CLR) input. It is applicable to buffer/storage registers, shift registers and pattern generators. The product has plastic small-outline (D) and ceramic flat (W) packages, ceramic chip carriers (FK), and standard plastic (N) and ceramic (J) 300-mil DIPs options.

This datasheet introduces SN54ACT573 and SN74ACT573, which are both 8-bit D-type transparent latches with 3-state outputs specifically designed for driving highly capacitive or relatively low-impedance loads.

bq2060 is a battery fuel gauge IC produced by ti company. It can measure battery voltage, current, remaining capacity, and provide battery remaining run-time predictions. bq2060 supports 2-wire SMBus v1.1 interface or 1-wire HDQ16 measurement, and can monitor and provide control to charge and discharge FETs in Li-Ion protection circuit.

The SN54LVC574A and SN74LVC574A are 8-bit edge-triggered D-type flip-flops, operating in the 2.7V to 3.6V VCC voltage and 3.3V VCC voltage respectively. Their inputs can accept voltages up to 5.5V, operating temperature range is -40°C to 85°C, -40°C to 125°C and -55°C to 125°C, maximum tpd is 7ns, typical VOLP (output ground bounce) is less than 0.8V, typical VOHV (output VOH undershoot) is greater than 2V. They support mixed-mode signal operation on all ports (5V input/output voltage with 3.3V VCC), Ioff supports partial power-down mode operation, latch-up performance exceeds 250 mA, ESD protection exceeds JEDEC 22 (2000V Human-Body Model (A114-A), 200V Machine Model (A115-A), 1000V Charged-Device Model (C101)).

This document describes the features and characteristics of SN54LS373, SN54LS374, SN54S373, SN54S374, SN74LS373, SN74LS374, SN74S373, and SN74S374 octal D-type transparent latches and edge-triggered flip-flops. These devices have 3-state outputs designed for driving highly capacitive or relatively low-impedance loads. The high-impedance 3-state and increased high-logic-level drive allow these registers to be connected directly to and drive the bus lines in a bus-organized system without the need for interface or pullup components. These devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

SN54273, SN54LS273, SN74273, SN74LS273 OCTAL D-TYPE FLIP-FLOP WITH CLEAR is an eight-bit D flip-flop with single-rail outputs produced by Texas Instruments. It has buffered clock and direct clear inputs and individual data inputs to each flip-flop. This product can be applied to buffer/storage registers, shift registers and pattern generators.

SN54ACT574, SN74ACT574 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS. Operates at 4.5V-5.5V, input voltages up to 5.5V, max tpd of 9 ns at 5 V, and TTL voltage compatible inputs.