MICROCHIP manuals, page 28
MICROCHIP TC4420/TC4429 Manual
This document introduces TC4420/TC4429 6A (peak) single-output MOSFET drivers. These drivers are fabricated in CMOS for lower power and more efficient operation versus bipolar drivers. Both devices have TTL/CMOS compatible inputs that can be driven as high as VDD + 0.3V or as low as –5V without upset or damage to the device. This eliminates the need for external level-shifting circuitry and its associated cost and size. The output swing is rail-to-rail, ensuring better drive voltage margin, especially during power-up/power-down sequencing. Propagational delay time is only 55 ns (typ.) and the output impedance is 2.5 Ω.
MICROCHIP MCP14E3/MCP14E4/MCP14E5 Manual
This document introduces the features of the MCP14E3/MCP14E4/MCP14E5 series devices, including high peak output current, independent enable function, low switch current, wide input supply voltage range, high capacitive load drive capability, short delay time, latch-up protection and so on. These devices are used in switch mode power supplies, pulse transformer drives, line drivers, motor and solenoid drives.
MICROCHIP MCP3004/3008 Manual
The MCP3004/3008 devices are successive approximation 10-bit Analog-to-Digital (A/D) converters with on-board sample and hold circuitry. The MCP3004 is programmable to provide two pseudo-differential input pairs or four single-ended inputs. The MCP3008 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are specified at ±1 LSB. Communication with the devices is accomplished using a simple serial interface compatible with the SPI protocol. The devices are capable of conversion rates of up to 200 ksps. The MCP3004/3008 devices operate over a broad voltage range (2.7V - 5.5V). Low current design permits
MICROCHIP MCP6021/2/3/4 handbook
MCP6021/2/3/4 are operational amplifiers (op amps) introduced by Microchip Technology Inc. They have features such as rail-to-rail input/output, wide bandwidth, low noise, and low offset voltage.
MICROCHIP PIC12C67X handbook
This data sheet introduces the characteristics of PIC12C671, PIC12C672, PIC12CE673 and PIC12CE674
MICROCHIP - PIC18F2585/2680/4585/4680 Data Sheet
This datasheet describes the features of 28/40/44-pin enhanced flash microcontrollers with ECAN™ Technology, 10-Bit A/D and nanoWatt Technology
MICROCHIP MCP6141/2/3/4 600 nA Non-Unity Gain Rail-to-Rail Input/Output Op Amps Manual
The MCP6141/2/3/4 is a low quiescent current, stable operational amplifier that can operate from a single supply voltage as low as 1.4V. This device features a gain bandwidth product of 100kHz and is stable for gains of 10V/V or higher.
MICROCHIP PIC12F508/509/16F505 8/14-Pin 8-Bit Flash Microcontrollers handbook
This document is a preliminary datasheet for the PIC12F508/509/16F505 series 8/14-pin, 8-bit Flash microcontrollers, released by Microchip Technology Inc. in 2007. The datasheet describes the features and characteristics of these products.
MICROCHIP PIC18F6X2X/8X2X Data Sheet Manual
Introduces the DS39612A PIC18F6X2X/8X2X 64/80-Pin High Performance, 64-Kbyte Enhanced FLASH Microcontrollers with A/D
MICROCHIP PIC18FXX8 Data Sheet
This data sheet provides detailed information about the PIC18FXX8 series microcontrollers, including product features, application examples, and technical details.
MICROCHIP 24AA16/24LC16B handbook
The Microchip 24AA16/24LC16B (24XX16*) is a 16Kbit Electrically Erasable PROM. The device is organized as eight blocks of 256 x 8-bit memory with a 2-wire serial interface.
MICROCHIP MCP6566/6R/7/9 handbook
The MCP6566/6R/7/9 is a low-power, single-supply, open-drain output comparator from Microchip. It features low quiescent current, greater than rail-to-rail input range, open-drain output, wide voltage supply range, and can be used in single, dual, and quad configurations.
MICROCHIP MCP131X/2X handbook
MCP131X/2X is a voltage supervisor device designed to keep a microcontroller in Reset until the system voltage has reached and stabilized at the proper level for reliable system operation.
MICROCHIP PIC16C62X EPROM-Based 8-Bit CMOS Microcontrollers handbook
This document is a data sheet for EPROM-Based 8-Bit CMOS Microcontrollers by Microchip Technology Inc. The document provides information about device applications and features, and emphasizes the responsibility to ensure that the application meets specifications. Additionally, the document highlights that Microchip Technology Incorporated does not provide any representation or warranty regarding the accuracy or use of the information, or infringement of patents or other intellectual property rights arising from such use or otherwise.
MICROCHIP PIC18CXX8 datasheet
This document introduces the features and characteristics of Microchip Technology Inc.'s high-performance RISC CPU products, including C-compiler optimized architecture instruction set, linear program memory addressing up to 32 Kbytes, linear data memory addressing up to 4 Kbytes, and up to 10 MIPS operation speed. In addition, the document also describes the peripheral features of the product, such as high current sink/source, multiple I/O ports with individual direction control, external interrupt pins, timer modules, capture/compare/PWM (CCP) modules, etc. It also includes advanced analog features such as a 10-bit Analog-to-Digital Converter module, addressable USART module, and Master Synchronous Serial Port (MSSP).