MICROCHIP Manuals

The MCP3301 is a 13-bit A/D converter from Microchip Technology Inc. that features full differential inputs and low power consumption. It is ideal for battery powered systems and remote data acquisition applications. The device uses a serial interface and can be added to any PICmicro microcontroller.

This data sheet provides detailed information about the PIC18F6310/6410/8310/8410 devices, including features, pin configuration, packaging, device dimensions, and performance specifications.

The MCP6021/1R/2/3/4 from Microchip Technology Inc. are rail-to-rail input and output op amps with high performance. Key specifications include: wide bandwidth (10 MHz), low noise (8.7 nV/√Hz), low input offset voltage and low distortion (0.00053% THD+N). The MCP6023 also offers a Chip Select pin (CS) that gives power savings when the part is not in use. The MCP6021, MCP6021R, MCP6022, MCP6023 and MCP6024 are suitable for various applications including automotive, driving A/D converters, multi-pole active filters, barcode scanners, audio processing, communications, DAC buffer, test equipment, and medical instrumentation.

This data sheet provides data for the 28/40/44-pin flash-based, 8-bit CMOS microcontrollers with nanoWatt technology PIC16F91X, including features and characteristics.

This is the PIC18F6520/8520/6620/8620/6720/8720 data sheet from Microchip.

This document is the user manual of TC9400/9401/9402, which are low-cost Voltage-to-Fre- quency (V/F) converters with low power dissipation and high accuracy. It can be used in Microprocessor Data Acquisition, 13-bit Analog-to-Digital Converters (ADC), Analog Data Transmission and Recording, Phase Locked Loops, Frequency Meters/Tachometer, Motor Control and FM Demodulation applications.

The MCP9843/98243 digital temperature sensors from Microchip Technology Inc. convert temperature from -40°C to +125°C into a digital word. These sensors meet JEDEC Specification JC42.4-TSE3000B3 and JC42.4-TSE2002B3 Memory Module Thermal Sensor Component. They provide an accuracy of ±0.2°C/±1°C (typical/maximum) from +75°C to +95°C. Additionally, the MCP98243 has an internal 256 Byte EEPROM which can be used for data storage.

This manual describes the use of the Microchip PICDEM 2 Plus.

The HCS512 is a code hopping decoder designed for secure Remote Keyless Entry (RKE) systems.

MCP6L01/1R/1U/2/4 is a low power, high gain, low noise, linear operational amplifier, which adopts SC-70-5 and SOT-23-5 packages, with a supply voltage range of 1.8V to 6.0V, and can be applied to portable equipment, photodiode amplifier, analog filters, notebooks and PDAs, battery-powered systems.

The MCP1702 is a family of CMOS low dropout (LDO) voltage regulators that can deliver up to 250 mA of current while consuming only 2.0 µA of quiescent current (typical). It is suitable for battery-powered devices, smoke detectors, digital cameras, etc.

This data sheet introduces the features and characteristics of the PIC12C5XX series of microcontrollers

The MCP73113 is a highly integrated Li-Ion battery charge management controller for use in space-limited and cost-sensitive applications. It features complete linear charge management including input overvoltage protection, pass transistor, current sense, and reverse discharge protection. Additionally, it offers constant current/constant voltage operation with thermal regulation, undervoltage lockout, high accuracy preset voltage regulation, resistor programmable fast charge current, preconditioning of deeply depleted cells, automatic end-of-charge control, automatic recharge, charge status output, and more.

24AA128/24LC128/24FC128 is a 16K x 8 (128K bit) Serial Electrically Erasable PROM from Microchip Technology Inc., capable of operation across a broad voltage range (1.8V to 5.5V). It has been developed for advanced, low power applications such as personal communications or data acquisition. The device also has a page-write capability of up to 64 bytes of data. This device is capable of both random and sequential reads up to the 128K boundary. Functional address lines allow up to eight devices on the same bus, for up to 1M bit address space. The device is available in the standard 8-pin plastic DIP, 8-pin SOIC (150 and 208 mil), and 14-pin TSSOP packages.

This document describes the features and characteristics of the Microchip Technology Inc. 25LC512 serial EEPROM memory, including maximum clock speed, byte and page-level write operations, low-power CMOS technology, electronic signature, self-timed erase and write cycles, sector write protection, built-in write protection, high reliability, etc.