MICROCHIP Manuals

The MCP1804 is a CMOS low dropout linear regulator that can operate from a 2.0V to 28.0V input voltage range and delivers up to 150mA of output current with only 50µA of input current. The device supports output voltages from 1.8V to 18.0V in 0.1V increments, with an output voltage accuracy of ±2%.

MCP4017/18/19 are programmable resistor products produced by Microchip Technology Inc., with four resistance values of 5kΩ, 10kΩ, 50kΩ and 100kΩ, 7-bit resolution, low temperature drift and low power consumption.

DS41250F is a 28/40/44/64-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt Technology data sheet published by Microchip

Technical specifications manual for 8/14-Pin, 8-Bit Flash Microcontroller released by Microchip Technology Inc., including information on product features, usage instructions, application scenarios, etc.

The MCP6541/2/3/4 family of comparators is a low power, single-supply, greater than rail-to-rail input operation comparator with push-pull (CMOS/TTL-compatible) outputs capable of driving heavy DC or capacitive loads.

TCN75A is a digital temperature sensor from Microchip Technology Inc. with ±1°C (typ.) accuracy, it can convert temperature from -40°C to +125°C to digital data. It supports user-defined resolution, power-saving mode, single conversion, alert output and hysteresis limits.

This data sheet describes the features of a 14-pin flash-based, 8-bit CMOS microcontroller with nanoWatt technology.

This document describes the features and characteristics of the 24AA04/24LC04B devices from Microchip Technology Inc. The device is a 4 Kbit Electrically Erasable PROM, designed for low-voltage operation down to 1.8V, with standby and active currents of only 1 μA and 1 mA, respectively. It has two blocks of 256 x 8-bit memory and uses a 2-wire serial interface. The device supports page write capability for up to 16 bytes of data. It is available in various package options and temperature ranges.

The MCP3550/1/3 are 22-bit ADC chips from Microchip Technology Inc. The chip has automatic internal offset and gain calibration function, the output noise is as low as 2.5 µVRMS, the effective resolution is 21.9 bits, the typical offset error is 3 µV, the typical full-scale error is 2 ppm, the maximum INL error is 6 ppm, the total unadjusted error is less than 10 ppm, and it supports no digital filter settling time and single-command conversion through 3-wire SPI interface. In addition, the chip also has ultra-low conversion current (MCP3550/1): the typical value is 100 µA under 2.7V power supply voltage and the typical value is 120 µA under 5.0V power supply voltage. The chip supports VSS to VDD common voltage range differential input, supports 2.7V to 5.5V single-supply operation, and the working temperature range is -40°C to +125°C. MCP3550/1/3 chips are suitable for applications such as weighing scales, direct temperature measurement, 6-digit DVMs, instrumentation, data acquisition and strain gauge measurement.

This is a data sheet of Microchip Technology Inc., which mainly introduces the features and characteristics of PIC16C745/765 microcontrollers.

This data sheet introduces the PIC16F870/871 28/40-pin 8-bit CMOS FLASH microcontrollers

This data sheet introduces the features and characteristics of the PIC12F683 data sheet

The TC1014/TC1015/TC1185 are high accuracy (typically ±0.5%) CMOS upgrades for older (bipolar) low dropout regulators such as the 7805 and 78L05. They provide 50mA (TC1014), 100mA (TC1015) and 150mA (TC1016) output current and can provide standard or custom output voltages in the 1.8V to 5.0V range.

The document introduces the core features, peripheral features and pin diagram of Microchip Technology Inc. DS30275A microcontroller.

The TC1232 is a fully-integrated processor supervisor that provides three important functions to safeguard processor sanity: precision power on/off reset control, watchdog timer and external reset override.