MICROCHIP Manuals

MCP434X/436X is a quad resistor network from Microchip, which provides potentiometer or rheostat configuration options, low temperature coefficient, non-volatile memory, high bandwidth, SPI serial interface, etc.

The Microchip Technology Inc. 25AA256/25LC256 (25XX256*) are 256k-bit Serial Electrically Erasable PROMs.

This document describes the DS51527B Voltage Supervisor SOT-23-5/6 Evaluation Board User's Guide

This document introduces the features of Microchip Technology Inc. 25AA080/25LC080/ 25C080 (25XX080*), including product features, package types, operating voltage, maximum clock frequency, and working temperature range

This user guide introduces the features and use of the DS51510A voltage supervisor SOT23 evaluation board.

This datasheet introduces the features and characteristics of Microchip Technology Inc. MCP6S21/2/6/8 analog programmable gain amplifiers (PGAs).

The MCP41XX and MCP42XX devices offer a wide range of product offerings using an SPI interface. This family of devices support 7-bit and 8-bit resistor networks, and Potentiometer and Rheostat pinouts.

The MCP1603 is a high efficient, fully integrated 500 mA synchronous buck regulator whose 2.7V to 5.5V input voltage range makes it ideally suited for applications powered from 1-cell Li-Ion or 2-cell/3-cell NiMH/NiCd batteries. At heavy loads, the MCP1603 operates in the 2.0 MHz fixed frequency PWM mode which provides a low noise, low output ripple, small-size solution. When the load is reduced to light levels, the MCP1603 automatically changes operation to a PFM mode to minimize quiescent current draw from the battery. No intervention is necessary for a smooth transition from one mode to another. These two modes of operation allow the MCP1603 to achieve the highest efficiency over the entire operating current range. The MCP1603 is available in space saving 5-Lead TSOT and 8-Lead 2X3 DFN packages.

The TCN75A is a temperature-to-digital converter with 12-bit resolution. It offers an accuracy of ±0.5°C (typical) at +25°C and ±3°C (maximum) from +25°C to +100°C. The converter features user-selectable resolution, an operating voltage range of 2.7V to 5.5V, a 2-wire interface, low operating current, and power-saving modes. It is commonly used in personal computers, hard disk drives, entertainment systems, office equipment, data communication equipment, and general-purpose temperature monitoring.

The MCP1602 is a high efficient, fully integrated 500 mA synchronous buck regulator with a power-good monitor. It is ideally suited for applications powered from 1-cell Li-Ion or 2-cell/3-cell NiMH/NiCd batteries.

This document introduces the features and characteristics of MCP201 products, including supported baud rates, power supply voltage range, working temperature range, interface standards, etc.

The HCS360 is a code hopping encoder designed for secure Remote Keyless Entry (RKE) systems. It features a programmable 28/32-bit serial number and 64-bit encryption key, unique transmission for each transmission, 67-bit transmission code length, 32-bit hopping code, and 35-bit fixed code (including serial number, function code, status, and CRC).

The 24AA256/24LC256/24FC256 is a 32K x 8 (256 Kbit) Serial Electrically Erasable PROM, capable of operation across a broad voltage range (1.8V to 5.5V) developed by Microchip Technology Inc. for advanced, low-power applications such as personal communications or data acquisition. It has a page write capability of up to 64 bytes of data. It is capable of both random and sequential reads up to the 256K boundary. Functional address lines allow up to eight devices on the same bus, for up to 2 Mbit address space. It is available in the standard 8-pin plastic DIP, SOIC, TSSOP, MSOP and DFN packages.

This datasheet introduces the features of the MCP7386X family of devices, including high-accuracy constant voltage and current regulation, cell preconditioning, cell temperature monitoring, advanced safety timers, automatic charge termination, internal current sensing, reverse-blocking protection, charge status and fault indication.