Analog Devices Manuals

The AD9381 is a HDMI display interface chip developed by Analog Devices, which supports high bandwidth digital content protection (HDCP), supports RGB and YCbCr output formats, supports HDMI 1.1, DVI 1.0 protocol, and can be applied to advanced TVs, HDTVs, projectors and LCD monitors.

AD9380 is a high-performance video decoder that supports HDCP and can convert HDMI signals to RGB and YCbCr signals. It supports multiple output formats and is suitable for advanced TVs, HDTVs, projectors, and LCD monitors.

ADF7902 is a low power UHF receiver IC that supports FSK modulation/demodulation and 2kbps data rate. Its features include single-chip design, eight selectable RF channels, low power consumption, and a wide operating frequency range.

The ADF7901 is a low power OOK/FSK UHF transmitter designed for use in RF remote control devices.

ADF7025 Rev. A is a high-performance ISM band transceiver IC that supports multiple frequency bands and data rates, with low power consumption and integrated features.

ADF7023 is a high performance, low power, ISM band FSK/GFSK/OOK/MSK/GMSK transceiver IC.

This document provides information about the silicon anomalies of the ADF7021 narrow-band transceiver IC and includes workarounds for these issues. One known issue is the inability to access the sync word detect signal on the SWD pin in 4FSK mode.

ADF7020 is a high-performance, ISM band, FSK/ASK transceiver IC. It features low power, low IF, programmable output power, high sensitivity and small package.

This document describes the features and characteristics of the Multichannel ISM Band FSK/GFSK/OOK/GOOK/ASK Transmitter ADF7012 Rev. 0, including single-chip, low power, multichannel operation, programmable output power, and data rates.

The ADF7011 is a low power OOK/ASK/FSK/GFSK UHF transmitter designed for use in ISM band systems. It contains an integrated VCO and Σ-∆ fractional-N PLL. The output power, channel spacing, and output frequency can be programmed with four 24-bit registers.

The ADF7010 is a low power OOK/ASK/FSK/GFSK UHF transmitter designed for use in ISM band systems. It contains an integrated VCO and sigma-delta fractional-N PLL, operating voltage of 2.3V-3.6V, programmable output power of -16dBm to +12dBm, data rate up to 76.8kbps, output current of 28mA, low power consumption, and is used in low cost wireless data transfer, wireless metering, remote control/security systems and keyless entry.

This document describes the features and characteristics of the ADF9010 Rev. 0 analog RF front end for the 900 MHz ISM band.

The AD6624A is part of Analog Devices’ SoftCell® multicarrier transceiver chipset designed for compatibility with Analog Devices’ family of high sample rate IF sampling ADCs (AD6640/ AD6644 12- and 14-bit). The SoftCell receiver comprises a digital receiver capable of digitizing an entire spectrum of carriers and digitally selecting the carrier of interest for tuning and channel selection. This architecture eliminates redundant radios in wireless base station applications. High dynamic range decimation filters offer a wide range of decimation rates. The RAM-based architecture allows easy reconfiguration for multimode applications. The decimating filters remove unwanted signals and noise from the channel of interest. When the channel of interest occupies less bandwidth than the input signal, this rejection of out-of-band noise is called “processing gain.” By using large decimation factors, this “processing gain” can improve the SNR of the ADC by 30 dB or more. In addition, the chipset includes a demodulator, IF filters, and ADC for receiving, demodulating, and digitizing RF signals.

The AD6634 is an 80 MSPS dual-channel WCDMA receive signal processor with wideband inputs and multiple features. It can process two WCDMA channels or four GSM/EDGE, IS136 channels, and has four independent digital receivers. The product also features programmable digital automatic gain control loops, digital resampling, and programmable FIR filters.