ANALOG Manuals

The ADG721, ADG722, and ADG723 are monolithic CMOS SPST switches, with a single supply voltage of 1.8 V to 5.5 V and an on resistance of 4 Ω (max).

ADG621/ADG622/ADG623 are CMOS ±5 V/+5 V, 4 Ω Dual SPST Switches. They feature 5.5 Ω (maximum) on resistance, 0.9 Ω (maximum) on resistance flatness, 2.7 V to 5.5 V single supply, ±2.7 V to ±5.5 V dual supply, rail-to-rail operation, 10-lead MSOP package, typical power consumption (<0.01 μW), TTL-/CMOS-compatible inputs. They can be used in Automatic test equipment, Power routing, Communication systems, Data acquisition systems, Sample-and-hold systems, Avionics, Relay replacements, Battery-powered systems.

ADG801 and ADG802 are monolithic CMOS, single-pole, single throw (SPST) switches with on resistance of less than 0.4 Ω, switching time of less than 35 ns, working voltage range of 1.8 V to 5.5 V, working temperature range of -40°C to +125°C, can be used for power routing, cellular phones, modems, PCMCIA cards, hard drives, data acquisition systems, communications systems, relay replacement and other applications

ADG751 is a low voltage SPST (single pole, single throw) switch that has excellent off isolation and wide bandwidth. It can be used for audio and video switching, RF switching, network applications, battery powered systems, communication systems, relay replacement and sample-and-hold systems.

ADG741/ADG742 are CMOS low voltage 2Ω SPST switches with a single supply range of 1.8V to 5.5V. The switch on resistance is only 2Ω and the switching time is tON 18ns tOFF 12ns. The working frequency can reach 200MHz.

This document describes the features and characteristics of the ADG417 LC2MOS precision mini-DIP analog switch, including maximum voltage supply, low on resistance, ultra-low power dissipation, and fast switching times. The product is suitable for precision test equipment, precision instrumentation, battery powered systems, and sample hold systems.

ADG601/ADG602 are monolithic, CMOS single-pole single-throw (SPST) switches with on resistance typically less than 2.5 Ω. The low on resistance, low on-resistance flatness, dual ±2.7 V to ±5.5 V or single +2.7 V to +5.5 V supplies, rail-to-rail input signal range, tiny 6-lead SOT-23; 8-lead MSOP; and 820 μm × 2255 μm die, low power consumption, TTL-/CMOS-compatible inputs are the features of this product.

The ADG901/ADG902 is a dual-path switch that operates up to 4.5 GHz and uses a CMOS process for high isolation and low insertion loss.

The ADG841 and ADG842 are low voltage CMOS devices containing a single-pole, single-throw (SPST) switch. They have ultralow on resistance and excellent audio performance, making them suitable for applications such as handsets, battery-powered systems, and communication systems.

ADG701L/ADG702L are monolithic CMOS SPST switches. These switches are designed using an advanced submicron process that provides low power dissipation, yet offers high switching speed, low on resistance, and low leakage currents.

The document describes the features and characteristics of the 33×17, 3.2 Gbps Digital Crosspoint Switch AD8151 Rev. B.

AD8150 is a 33 × 17, fully differential, nonblocking array with >1.5 Gbps per port NRZ data rate. It features low cost, low power, wide power supply range, low jitter, and no heat sinks required.

The ADV3202/ADV3203 is a 300 MHz, 32×16 buffered analog crosspoint switch from Analog Devices. The product is available in G = +1 (ADV3202) or G = +2 (ADV3203) operation modes, with a single supply of +5 V, dual supplies of ±2.5 V or ±3.3 V (G = +2), and support for serial programming of the switch array and a 2:1 OSD insertion mux per output. The product also features a high impedance output disable function to allow connection of multiple devices while minimizing the output bus load. In addition, the product offers excellent video performance (60 MHz 0.1 dB gain flatness, 0.1% differential gain error, and 0.1° differential phase error), and excellent AC performance (bandwidth > 300 MHz, slew rate > 400 V/μs, power consumption 1 W, and low all hostile crosstalk -48 dB @ 5 MHz).

The 300 MHz, 32 × 32 Buffered Analog Crosspoint Switch ADV3200/ADV3201 is a large, 32 x 32, nonblocking switch array that can be powered by a single 5 V supply, dual ±2.5 V supplies, or dual ±3.3 V supplies (G = +2). The switch array has excellent video performance, with a gain flatness of 0.1 dB at 60 MHz, a differential gain error of 0.1% (RL = 150 Ω), and a differential phase error of 0.1° (RL = 150 Ω). In addition, the switch array has excellent ac performance, with a bandwidth of >300 MHz, a slew rate of >400 V/μs, and a power consumption of 1.25 W.