ANALOG Manuals

AD5334/AD5335/AD5336/AD5344 is a low power parallel interface voltage output 8/10/12-bit DACs produced by Analog Devices.

This document describes the features and characteristics of Analog Devices' 15 MHz Rail-to-Rail operational amplifiers OP162/OP262/OP462, including wide bandwidth, low offset voltage, low noise, single-supply operation, rail-to-rail output swing, etc. The product is suitable for applications such as portable instrumentation, sampling ADC amplifier, wireless LANs, direct access arrangement, and office automation.

The AD9858 is a direct digital synthesizer (DDS) featuring a 10-bit DAC output. It has an internal clock speed of 1 GSPS and supports up to a 2 GHz input clock (selectable divide-by-2). The device integrates a 10-bit D/A converter and has a phase noise of less than 145 dBc/Hz @ 1 kHz offset. The output frequency is 100 MHz (DAC output) and it has a 32-bit programmable frequency register. It supports a simplified 8-bit parallel and SPI serial control interface and has automatic frequency sweeping capability. The device operates on a 3.3 V power supply with a typical power dissipation of 2 W. It also integrates a programmable charge pump and phase frequency detector with a fast lock circuit. The charge pump supply can be isolated up to 5 V. Additionally, the AD9858 integrates a 2 GHz mixer.

A-V EZ-Extender is a product released by Analog Devices. It can be connected to the Blackfin ADSP-BF537 EZ-KIT Lite development board and provide A/V interface, which allows developers to use A/V devices to test ADSP-BF537 EZ-KIT Lite

The AD7674 is a 18-bit, 2.5 LSB INL, 800 kSPS SAR ADC that provides high speed 800 kSPS sampling and up to 103 dB of dynamic range in a single 5 V supply operation. The AD7674 also features a pin-to-pin compatible upgrade of AD7676, AD7678, and AD7679 for applications requiring 18-bit resolution and 800 kSPS sampling.

The AD7237A/AD7247A is a dual 12-bit DAC on a single chip. It features two 12-bit CMOS DACs, on-chip voltage reference, output amplifiers and reference buffer amplifiers. It supports 12V to 15V operation, single or dual supply operation, and has a low power consumption of 165mW. It supports 8-bit or 16-bit parallel interface

The ADR390/ADR391/ADR392/ADR395 are Micropower, Low Noise Precision Voltage References with Shutdown from Analog Devices.

The AD600/AD602 are dual channel, low noise, variable gain amplifiers. The AD600 has a gain range of 0 to 40 dB and the AD602 has a gain range of -10 to 30 dB. They feature accurate absolute gain, low input noise, low distortion, high bandwidth, stable group delay and low power.

AD5410/AD5420 is a single-channel, 12-/16-bit, serial input, 4 mA to 20 mA current source DAC. It features 12-/16-bit resolution and monotonicity, current output ranges of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA, flexible serial digital interface, on-chip output fault detection, and on-chip reference voltage.

AD9221/AD9223/AD9220 are complete 12-bit 1.5/3.0/10.0 MSPS monolithic A/D converters with low power, low noise, high accuracy and high dynamic range.

The AD7398/AD7399 is a 12-bit/10-bit, serial-input quad DAC designed to operate from a single or dual power supply.

The AD603 is a low noise, voltage controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of −11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using one external resistor. The input referred noise spectral density is only 1.3 nV/√Hz, lower than any other similar product.

The AD2S1200 is a complete 12-bit resolution tracking resolver-to-digital converter, integrating an on-board programmable sinusoidal oscillator that provides sine wave excitation for resolvers. An external 8.192 MHz crystal is required to provide clock to the oscillator.

The AD7904/AD7914/AD7924 are respectively, 8-bit, 10-bit, and 12-bit, high speed, low power, 4-channel, successive-approximation ADCs. The parts operate from a single 2.7 V to 5.25 V power supply and feature throughput rates up to 1 MSPS. The AD7904/AD7914/AD7924 feature flexible power/serial clock speed management, no pipeline delays, up to 70 dB SNR, SPI/QSPI/MICROWIRE/DSP compatible high speed serial interface, and 0.5 µA maximum shutdown mode.