Key facts
- Manuals
- 1
- Languages
- EN
- Last added
- 2023-11-29
Featured Gaco manuals

Gaco GacoFlex E5320 2-Part Epoxy Primer/Filler Spray Guide
This spray guide from Gaco covers handling and airless spray application of GacoFlex E5320 2-Part Epoxy Primer/Filler, a two-component material mixed 1:1 by volume. It describes safety equipment and ventilation, indoor and outdoor spraying precautions, storage, mixing, thinning with 10%-20% clean water, airless spray pump and hose requirements, spray tip selection, application technique, clean-up and troubleshooting.
The guide lists a minimum 3,000 psi pump output pressure, a recommended 0.017-inch tip with a 517 tip described as ideal for roofs, a 30 mesh or larger filter screen, an application rate typically from 200 to 500 sq. ft. per gallon, an 18 to 24 inch gun distance, a half-lap technique, a minimum of 2 hours between coats, and no application below 50°F. It also includes electric airless sprayer examples and corrective actions for poor spray pattern, pulsating spray, sags/runs and foamy or pin-holed coating.
Covers: Safety Equipment and Ventilation · Indoor Spraying Precautions · Outdoor Spraying Precautions · Storage and Handling · Mixing · Thinning
Latest Gaco manuals
Gaco GacoFlex E5320 2-Part Epoxy Primer/Filler Spray Guide
Application Note 4 pages · 200 KB · ENSpray guide for GacoFlex E5320 2-Part Epoxy Primer/Filler covering safety, mixing, thinning, airless spray equipment, application, clean-up and troubleshooting.
Which document do I need?
Application Note
How to use the product for one specific task, with worked examples.
Questions answered in Gaco manuals
What mix ratio should be used for GacoFlex E5320?
Combine equal parts by volume of Part A and Part B, then mix thoroughly.
From: Gaco GacoFlex E5320 2-Part Epoxy Primer/Filler Spray Guide
How much can GacoFlex E5320 be thinned?
Add 10%-20% clean water when thinning is necessary, and do not thin more than 20%.
From: Gaco GacoFlex E5320 2-Part Epoxy Primer/Filler Spray Guide
