Key facts
- Manuals
- 2
- Languages
- EN
- Last added
- 2023-10-26
Featured Sleipner manuals

Sleipner GW-1 S-Link Gateway User Manual
The Sleipner GW-1 is a certified NMEA2000 device designed to connect NMEA2000 CAN bus equipment to the S-Link bus. It facilitates the transmission of navigation, engine, and autopilot data, such as GPS position, vessel heading, and engine parameters, between different marine systems. The gateway is powered directly by the S-Link bus, eliminating the need for external power sources.
Covers: Introduction · CAN Interface · NMEA0183 Interface · Installation Guide · GW-1 Gateway Measurements · Technical Specifications

Sleipner Automatic Main Switch 897612/897624 Installation Guide
This guide provides step-by-step instructions for installing Sleipner automatic main switches (models 897612 and 897624) on boats. It includes product measurements, fuse and cable installation, wiring diagrams for single and dual thruster systems, and safety guidelines. The document emphasizes that installation must comply with local regulations and that only licensed professionals should perform electrical work. Faulty installation voids all warranties.
The guide covers mounting the switch, connecting battery cables and fuses, installing thruster control cables, and configuring override buttons. It includes technical diagrams for 12V and 24V systems and warns against installing the switch in ignition-protected spaces or near water. Users are advised to consult thruster manuals and professional installers if unsure.
Covers: Responsibility of the Installer · General Installation Considerations and Precautions · Product Measurements · Automatic Main Switch (AMS) Installation · AMS Fuse and Battery Cable Installation · Electrical Installation
Latest Sleipner manuals
Sleipner GW-1 S-Link Gateway User Manual
User Manual 12 pages · 804 KB · ENUser manual for the Sleipner GW-1 S-Link Gateway, covering installation, CAN and NMEA0183 interface connections, and technical specifications.
Sleipner Automatic Main Switch 897612/897624 Installation Guide
Installation Guide 12 pages · 1 MB · ENInstallation guide for Sleipner automatic main switches 897612 and 897624, covering wiring, fuse setup, and safety precautions.
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in Sleipner manuals
Does the GW-1 require external power?
No, power to the gateway is supplied from the S-Link bus so no external power is required.
What are the supported NMEA2000 PGNs?
Supported PGNs include GPS Position, GPS COG & SOG, Engine Parameters, Transmission Parameters, and Vessel Heading.
What voltage versions are available?
The switch is available in 12V (model 897612) and 24V (model 897624) versions.
From: Sleipner Automatic Main Switch 897612/897624 Installation Guide
What happens if I install it incorrectly?
Faulty installation will void all warranties given by Sleipner Motor AS.
From: Sleipner Automatic Main Switch 897612/897624 Installation Guide
