Key facts
- Manuals
- 4
- Languages
- EN
- Last added
- 2023-10-17
Featured Electro-Metrics manuals
Electro-Metrics EFP-30 Electrostatic Field Probe Instruction Manual
The Electro-Metrics Model EFP-30 is a handheld, uncalibrated electrostatic field probe designed to investigate sources of localized electric field radiation. It operates within a frequency range of 9 kHz to 1 GHz and is intended for searching for Radio Frequency (RF) leakage. The probe helps users determine the side of an article under test that is radiating the highest RF level before running MIL-STD or FCC radiated emissions tests.
The device features a 50Ω nominal impedance and connects via a TNC output connector. Mechanically, it measures 280 mm in length with a diameter of 32 mm and weighs 454 g. The manual includes information on the product description, technical specifications, and a limited 12-month warranty covering defects in materials and workmanship.
Covers: Description · Specifications · Warranty · Electrical Frequency Range · Impedance · Output Connector
Electro-Metrics ALP-11 Loop Antenna Instruction Manual
This manual provides instructions for using the Electro-Metrics ALP-11 loop antenna, designed for magnetic field measurements from 20 Hz to 50 kHz. It includes details on calibration, mounting, and usage in compliance testing. The antenna is calibrated for 50 Ω systems and features a Faraday shield to minimize electric field interference.
Technical specifications include a frequency range of 20 Hz–50 kHz, BNC output connector, and mechanical dimensions of 635 mm diameter and 686 mm height. The manual also covers warranty terms and usage limitations, including a note that the antenna can be used up to 500 kHz with 50 Ω instruments.
Covers: Description and Use · Specifications · Warranty · Antenna Factor Chart
Electro-Metrics EM-6945 Vector Log Periodic Antenna Instruction Manual
The Electro-Metrics EM-6945 is a linearly polarized broadband antenna operating from 500 MHz to 25 GHz, designed for use as either a transmitting or receiving antenna. Its linearly polarized design allows for the separate measurement of horizontal and vertical electric field components. The antenna features a PC board with etched elements inserted into an ABS plastic base and includes a Type 'k' (2.92mm) output connector. It attaches to standard 14-20 tripod mounts and can be oriented vertically or horizontally with a detented rotation joint.
Covers: Description and Use · Specifications · Typical Performance Data · Gain · Antenna Factor · VSWR
Electro-Metrics RM-25 Automatic Switching Unit Instruction Manual
The Electro-Metrics RM-25 Automatic Switching Unit contains two relays in parallel, each switching five input connectors between an output connector from DC to 18 GHz. The unit can be operated using either the front panel controls or an external computer via the rear panel IEEE-488.2 Interface Bus Connector. It features a maximum RF power input of 200 Watts average and 1000 Watts peak.
Covers: Introduction · Specifications · Power Supply · Description · Theory of Operation · Operating Procedure
Latest Electro-Metrics manuals
Electro-Metrics EFP-30 Electrostatic Field Probe Instruction Manual
User Manual 4 pages · 168 KB · ENThis manual covers the operation and specifications of the Electro-Metrics EFP-30 handheld electrostatic field probe for RF leakage detection.
Electro-Metrics ALP-11 Loop Antenna Instruction Manual
User Manual 6 pages · 119 KB · ENInstruction manual for the Electro-Metrics ALP-11 loop antenna, covering operation, specs, and warranty for 20 Hz–50 kHz magnetic field measurements.
Electro-Metrics EM-6945 Vector Log Periodic Antenna Instruction Manual
User Manual 9 pages · 310 KB · ENThis instruction manual covers the Electro-Metrics EM-6945 Vector Log Periodic Antenna, detailing its description, specifications, and typical performance…
Electro-Metrics RM-25 Automatic Switching Unit Instruction Manual
User Manual 14 pages · 228 KB · ENThis manual provides operating instructions for the Electro-Metrics RM-25 Automatic Switching Unit, covering specifications, power requirements, and remote…
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in Electro-Metrics manuals
What is the primary use of the EFP-30 probe?
It is used to investigate sources of localized electric field radiation and search for Radio Frequency (RF) leakage.
From: Electro-Metrics EFP-30 Electrostatic Field Probe Instruction Manual
How is the EFP-30 used in testing?
It is used to determine the side of an article under test which is radiating the highest RF level prior to running a MIL-STD or FCC radiated emissions test.
From: Electro-Metrics EFP-30 Electrostatic Field Probe Instruction Manual
What is the frequency range of the ALP-11 antenna?
The ALP-11 Loop Antenna is designed to obtain magnetic field measurements from 20 Hz to 50 kHz.
From: Electro-Metrics ALP-11 Loop Antenna Instruction Manual
What is the impedance of the antenna?
The antenna is designed to work into a 50 Ω system and the calibration chart is based on this use.
From: Electro-Metrics ALP-11 Loop Antenna Instruction Manual
What is the maximum continuous power rating?
The antenna is rated for a maximum power level of 5 W.
From: Electro-Metrics EM-6945 Vector Log Periodic Antenna Instruction Manual
What is the operating temperature range?
The operating temperature range is 0°C to 50°C.
From: Electro-Metrics RM-25 Automatic Switching Unit Instruction Manual