ATMEL Manuals (Industrial)

ATMEL AVR32 EVK1100 Getting Started Guide

AVR32 EVK1100 Getting Started Guide, introduces the characteristics and usage methods of EVK1100.

File format: PDF Size:696 KB

ATMEL ATmega169V ATmega169 Preliminary

This chip is a high-performance low-power AVR® 8-bit microcontroller

File format: PDF Size:3315 KB

ATMEL AT90USB646/AT90USB647/AT90USB1286/AT90USB1287

This document is about a high-performance, low-power AVR® 8-bit microcontroller. It features an advanced RISC architecture with powerful instructions, single clock cycle execution, general-purpose working registers, and fully static operation. It has non-volatile program and data memories, with options for in-system self-programmable flash and independent lock bits for boot code section. It supports true read-while-write operation, EEPROM and SRAM memories, JTAG interface, and USB 2.0 full-speed/low-speed device and On-The-Go module with high data transfer rates.

File format: PDF Size:3315 KB

ATMEL - Features High Performance Low Power AVR 8-Bit Microcontroller Advanced RISC Architecture 120

This datasheet describes the features and characteristics of the ATtiny25/45/85 series of high performance, low power AVR® 8-bit microcontrollers.

File format: PDF Size:2440 KB

ATMEL ATtiny26 ATtiny26L 8-bit Microcontroller with 2K Bytes Flash handbook

1477F-AVR-12/04 is a high-performance, low-power AVR® 8-bit microcontroller with a RISC architecture, 118 powerful instructions, single-clock cycle execution, 32 x 8 general-purpose working registers, fully static operation, and up to 16 MIPS throughput at 16 MHz.

File format: PDF Size:1464 KB

ATMEL AT93C46 AT93C56 AT93C57 AT93C66 DATA SHEET

The AT93C46/56/57/66 is a serial electrically erasable programmable read only memory (EEPROM) with 1024/2048/4096 bits of storage capacity and an internal organization of 64/128/256 words of 16 bits each when the ORG pin is connected to VCC and 128/256/512 words of 8 bits each when it is tied to ground. The device is optimized for use in many industrial and commercial applications where low power and low voltage operations are essential. AT93C46/56/57/66 is available in space saving 8-pin PDIP and 8-pin JEDEC and EIAJ SOIC packages.

File format: PDF Size:113 KB

ATMEL AT91SAM9263-EK Evaluation Board User Guide

AT91SAM9263-EK Evaluation Board User Guide

File format: PDF Size:1044 KB

ATMEL AT22V10/L handbook

The AT22V10/AT22V10L is a CMOS high-performance EPROM-based programmable logic device (PLDs), with speeds down to 15 nanoseconds and power dissipation as low as 12 mA. All speed ranges are specified over the full 5 V ±10% range. All pins offer a low ±10 µA leakage. The AT22V10L provides the optimum low power CMOS PLD solution, with low DC power (8 mA typical) and full CMOS output levels. The AT22V10L significantly reduces total system power and enhances system reliability. Full CMOS output levels help reduce power in many other system components.

File format: PDF Size:278 KB

ATMEL ATmega8 ATmega8L handbook

The document describes a high-performance, low-power AVR 8-bit microcontroller with advanced RISC architecture and various peripheral features.

File format: PDF Size:2422 KB

ATMEL Multimedia USB Keyboard Controller with Embedded Hub AT43USB326 Manual

This is an 8-bit microcontroller based on the AVR RISC architecture. It has an instruction cycle time of 83ns and can be used as a USB hub. It also has USB keyboard functionality, 16KB of program memory and 512 bytes of data storage.

File format: PDF Size:1112 KB

ATMEL Full-speed USB Microcontroller with an Embedded Hub AT43USB320A Manual

This document is the Atmel AT43USB320A datasheet, which introduces the features of the product, including 8-bit RISC microcontroller, USB function, external program memory, 512-byte data SRAM, 32 x 8 general-purpose working registers, 32 programmable I/O port pins, programmable serial UART, master/slave SPI serial interface, one 8-bit timer/counter with separate prescaler, one 16-bit timer/counter with separate prescaler and two PWMs, external and internal interrupt sources, programmable watchdog timer, 6 MHz oscillator with on-chip PLL, 5V operation with on-chip 3.3V power supply, 100-lead LQFP package

File format: PDF Size:1415 KB

ATMEL 8-bit Flash Microcontroller with Full Speed USB Device AT89C5131A-L Manual

This document introduces the features of the 80c52x2 core, including the maximum core frequency, dual data pointer, full-duplex enhanced UART, three 16-bit timers/counters, 256 bytes of scratchpad RAM, 16/32KB on-chip flash EEPROM, 3KB flash EEPROM, 1KB EEPROM data, 1024 bytes of on-chip expanded RAM, and integrated power monitor (POR/PFD).

File format: PDF Size:1888 KB

ATMEL AT89C5131A-L handbook

File format: PDF Size:0 KB

ATMEL AT89C5131 handbook

File format: PDF Size:0 KB

ATMEL AT43USB355 handbook

This document describes the features of the Atmel AT43USB355 microcontroller, including 83 ns instruction cycle time, USB hub, 24 KB program memory, 32 general-purpose working registers, etc.

File format: PDF Size:1219 KB

ATMEL AT43USB325 handbook

This document is the Atmel AT43USB325 datasheet, which introduces the features and characteristics of the product, including 8-bit RISC microcontroller, USB Hub, USB keyboard function, 16KB program memory, 512-byte data SRAM, 32x8 general-purpose working registers, 42 programmable I/O port pins, support for 20x8 keyboard matrix, keyboard scan inputs with pull-up resistor, four LED driver outputs, one 8-bit timer/counter, one 16-bit timer/counter, external and internal interrupt sources, programmable watchdog timer, 6MHz oscillator, On-chip PLL, 5V operation and On-chip 3.3V power supply

File format: PDF Size:1298 KB

ATMEL AT89C5132 Manual

File format: PDF Size:0 KB

ATMEL 8-bit Flash Microcontroller with Full Speed USB Device AT89C5130A-M AT89C5131A-M handbook

This document details the features of the 80C52X2 core, including maximum core frequency, dual data pointer, full-duplex enhanced UART, three 16-bit timers/counters, 256 bytes of scratchpad RAM, 16/32-Kbyte on-chip flash EEPROM, 3-Kbyte flash EEPROM for bootloader, 1-Kbyte EEPROM data, 1024 bytes of on-chip expanded RAM, integrated power monitor, USB 1.1 and 2.0 full-speed compliant module, endpoint 0 for control transfers, 6 programmable endpoints, 48 MHz PLL for full-speed bus operation, bus disconnection on microcontroller request, 5 channels programmable counter array (PCA) and programmable hardware watchdog timer

File format: PDF Size:1902 KB

ATMEL AT89C5130A-M AT89C5131A-M Manual

This document introduces the features of AT91SAM7S256A, including peripherals, communication and clock

File format: PDF Size:2222 KB

Brands



Products