Industrial

The product is a 2A output current, high speed MOSFET gate driver optocoupler

The FOD3150 is a high noise immunity, 1.0A output current, gate drive optocoupler from Fairchild Semiconductor Corporation. It features 20kV/µs minimum common mode rejection, and uses P-channel MOSFETs at the output stage to enable output voltage swing close to the supply rail. The device operates from a wide supply voltage range of 15V to 30V, and has fast switching speed (500ns max. propagation delay, 300ns max. pulse width distortion). It also features Under Voltage LockOut (UVLO) with hysteresis, and extended industrial temperature range (-40°C to 100°C).

This product is a high noise immunity, 2.5A output current, gate drive optocoupler. It has a 35kV/µs minimum common mode rejection characteristic and can drive a 2.5A peak output current to drive most 1200V/20A IGBTs/MOSFETs.

FOD2743A, FOD2743B, FOD2743C Optically Isolated Error Amplifier is a single-chip device that combines an optocoupler, a precision programmable shunt reference and an error amplifier. It features a 2.5V reference, a CTR of 50% to 100% at 1mA, a 5000V RMS isolation voltage, a low temperature coefficient of 50 ppm/°C max, and is intended for use as the error amplifier/reference voltage/optocoupler function in isolated AC to DC power supplies and dc/dc converters.

FOD2742A, FOD2742B, FOD2742C is an optically isolated error amplifier with precision reference. It features a 2.5V reference, CTR of 100% to 200%, 2500V RMS isolation, and low temperature coefficient. It is suitable for power supply regulation and DC to DC converter applications.

FOD2741A, FOD2741B, FOD2741C are optically isolated error amplifiers produced by Fairchild Semiconductor Corporation.

This product is an optically isolated error amplifier, which contains precision reference and error amplifier. It features high accuracy, high conversion rate and high isolation voltage. It is suitable for workstation power supply, telecom central office supply and telecom bricks.

The FOD2200 is an optically coupled logic gate that combines an AlGaAs LED and an integrated high gain photo detector. The detector has a three state output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resis- tor and allows for direct drive of data busses. The hyster- esis provides differential mode noise immunity and eliminates the potential for output signal chatter. The Electrical and Switching Characteristics of the FOD2200 are guaranteed over the temperature range of 0°C to 85°C and a VCC range of 4.5V to 20V.

FOD0721, FOD0720, FOD0710 is a high CMR, 25Mbit/sec logic gate optocoupler from Fairchild Semiconductor Corporation. Its features include 20kV/µs minimum CMR, 40ns maximum propagation delay, 25Mbit/sec data rate, 6ns pulse width distortion, +5V CMOS compatibility, -40 to 100°C temperature range, UL1577, 3750 VACrms for 1 minute (File #E90700, Volume 2) and IEC60747-5-2 pending approval of safety and regulatory approvals.

FOD060L, FOD260L are high speed-10 MBit/s logic gate optocouplers produced by Fairchild Semiconductor. It has features such as very high speed-10 MBit/s, superior CMR-50 kV/µs at 1,000V peak, 8-pin DIP package, logic gate output, programmable output, open collector output. It is widely used in switching power supplies, pulse transformer replacement, computer peripheral interface and other applications.

FOD050L, FOD250L, FOD053L are high speed transistor optocouplers from Fairchild Semiconductor Corporation. It features low power consumption, high speed and superior common mode rejection ratio.

FLD00030 is a Fairchild Semiconductor analog ambient light sensor with small size, low profile, close to human eye spectral response, suitable for environment light measurement applications of mobile appliances such as mobile phones, notebooks, PDAs and digital still cameras.

CNY17XM, CNY17FXM, MOC810XM are phototransistor optocouplers with UL and VDE recognition. They feature high BVCEO, closely matched current transfer ratio, and low coupled capacitance. They are suitable for applications such as power supply regulators, digital logic inputs, microprocessor inputs, appliance sensor systems, and industrial controls.

6N138M,6N139M,HCPL2730M,HCPL2731M are low input current high gain split darlington optocouplers from Fairchild Semiconductor Corporation, with features of low current, high CTR, high CMR, wide temperature range