Industrial

The ADE7880 is a high accuracy, 3-phase electrical energy measurement IC featuring an adaptive real time monitoring (ARTM) harmonic engine. ARTM is capable of monitoring three user selectable harmonics, in addition to the fundamental. ARTM automatically tracks fundamental frequency and provides real-time harmonic measurement updates. Harmonic analysis includes current rms, voltage rms, active, reactive, and apparent powers, power factor, harmonic distortion, and total harmonic distortion plus noise (THD + N) calculations. The ADE7880 incorporates seven second-order Σ-Δ ADCs, a digital integrator, reference circuitry, and all the signal processing required to perform total (fundamental and harmonic) active, fundamental active, fundamental reactive, and apparent energy measurement and rms calculations. The ADE7880 is suitable to measure active, reactive, and apparent energy in various 3-phase configurations, such as wye or delta services, with both three and four wires. This metering IC provides system calibration features for each phase: rms and energy offset correction, phase calibration, and gain calibration. The ADE7880 supports IEC 62053-21, IEC 62053-22, IEC 62053-23, EN 50470-1, EN 50470-3, ANSI C12.20, and IEC 61000-4-7 standards. The ADE7880 is pin compatible with the popular ADE7878, ADE7868, ADE7858, and ADE7854 3-phase energy metering ICs.

The document describes the features and characteristics of the AD9203W, a 10-bit, 40 MSPS, 3V, 74 mW analog-to-digital converter for automotive applications.

AD7924-KGD is a 12-bit, high-speed, low-power, 4-channel successive approximation ADCs. The parts operate from a single 2.7 V to 5.25 V power supply and feature four single-ended inputs with sequencer. The input bandwidth is wide, reaching 70 dB SNR at 50 kHz input frequency. It also features flexible power/serial clock speed management, no pipeline delays, high speed serial interface (SPI/QSPI™/MICROWIRE™/DSP compatible) and 0.5 μA maximum shutdown mode. The device is qualified for automotive applications and is a known good die (KGD) device fully guaranteed to data sheet specifications.

ADE8157 is a complete digital baseband processor IC that includes a physical layer (PHY), data link layer (DLL), a networking layer, supports DL/T 645-1997 or -2007 data protocol (specific to China) as well as a pass-through option.

The AD7923-EP is a 4-channel, 200 kSPS, 12-bit ADC with a sequencer. It features fast throughput rate, low power consumption, wide input bandwidth, and is suitable for defense and aerospace applications.

This document describes the known issues with the ADE7880 silicon

This application note describes the differences between the ADE7878 and the ADE7880. It discusses the hardware and software differences and provides a header file for the ADE7880.

This document is a solution brief from the analog device company on digital to analog converter IC, including power control, low power, high precision and other types of DAC products

This document is the AD7466-KGD datasheet, which introduces the features and characteristics of AD7466-KGD, including working voltage, power consumption, sampling rate, input bandwidth, etc.

This document is the user guide for the evaluation board of AD9643/AD9613/AD6649/AD6643 analog-to-digital converters. It describes the features, functions, required equipment, and software of the evaluation board.

The AD7879W is a low voltage controller for touch screens. It features a 4-wire touch screen interface, qualification for automotive applications, operation from 1.6V to 3.6V, median and averaging filter for noise reduction, automatic conversion sequencer and timer, user-programmable conversion parameters, auxiliary analog input/battery monitor, optional GPIO, interrupt outputs, touch-pressure measurement, touch wake-up function, and shutdown mode.

This data sheet introduces the features and characteristics of the 10-Bit, 10-Channel, Multiformat SDTV/HDTV Video Decoder and RGB Graphics Digitizer ADV7181D

The ADE7816 is a single-chip energy measurement analog front end (AFE) that monitors the energy consumption and power quality of up to six electrical circuits. It is designed for data center power distribution units, energy monitoring and management systems, and multi-channel electricity meters. The new AFE provides high accuracy energy usage and power quality data for each circuit.

This manual describes the EVAL-AD7xxxSDZ evaluation board, which is used to evaluate the 10-lead PulSAR® analog-to-digital converters (ADCs). The evaluation board includes a variety of analog signal conditioning circuitry, reference voltage, reference buffers, and ADC drivers, and is equipped with PC software for controlling and analyzing time domain and frequency domain data.