Industrial

The FAN7390 is a monolithic high- and low-side gate- drive IC, which can drive high speed MOSFETs and IGBTs that operate up to +600V.

FAN73901 is a high voltage gate driver that can drive high-speed MOSFETs and IGBTs that operate up to +600V.

The FAN7392 is a high-current, high- and low-side gate drive IC produced by Fairchild Semiconductor Corporation. It can drive high-voltage MOSFETs and IGBTs with a maximum operating voltage of 600V.

FAN73932 is a half-bridge gate-drive IC produced by Fairchild company. It is suitable for driving high-voltage MOSFETs and IGBTs with a maximum operating voltage of up to +600V.

The FAN73933 is a half-bridge, gate-drive IC with programmable dead-time control functions that can drive high-speed MOSFETs and IGBTs operating up to +600V.

FAN7393A is a half-bridge gate-drive IC with shut- down and programmable dead-time control functions that can drive high-speed MOSFETs and Isolated Gate Bridge Transistors (IGBTs) operating up to +600V. It has a buffered output stage with all NMOS transistors designed for high-pulse-current driving capability and minimum cross-conduction. Fairchild’s high-voltage process and common-mode noise canceling techniques provide stable operation of the high-side driver under high dv/dt noise circumstances. An advanced level-shift circuit offers high-side gate driver operation up to VS=-

The FAN7842 is a monolithic high and low side gate driver IC that can drive MOSFETs and IGBTs operating up to +200V. It features floating channels, sourcing/sinking current driving capability of typically 350mA/650mA, common-mode dv/dt noise canceling circuit, extended allowable negative VS swing, UVLO functions, and TTL-compatible input logic threshold levels. It is suitable for applications such as half- and full-bridge converters, current-fed push-pull converters, and synchronous buck converters.

This document introduces the 3900 Series product from 3M Interconnect Solutions Division. It is a .100″ × .100″ PCB two-row connector that fits standard .100 inch × .100 inch header layout. It uses less board area than a 4-row design. The product features glass-filled polyester (PBT) as the insulation material with UL 94V-0 flammability rating. It has a current rating of 1A and can withstand temperatures from -55°C to +105°C. The document also provides supplier query information.

The MK68901 MFP is a multi-function peripheral with 8 input/output pins, a 16-source interrupt controller, 4 timers, and a single-channel full duplex USART. It is fully compatible with the 68000 bus and has a wide range of applications.

The document describes the features and characteristics of the MK68564 January 1989 serial input output device. It is compatible with the MK68000 CPU and MK68000 series DMA. The device has two independent full-duplex channels and two independent baud-rate generators. It supports data rates in synchronous or asynchronous modes, with self-test capability and modem status monitoring. It also supports asynchronous, byte synchronous, and bit synchronous features, such as various data bit lengths, stop bit lengths, parity options, sync character insertion, etc.

This application note describes the selection of bootstrap components, including bootstrap capacitors, bootstrap diodes, bootstrap resistors, bootstrap transformers, and bootstrap transistors.

The FAN7888 is a monolithic three half-bridge gate-drive IC designed for high-voltage, high-speed driving MOS-FETs and IGBTs operating up to +200V.

The FAN73892 is a monolithic three-phase half-bridge gate-drive IC designed for high-voltage, high-speed, driving MOSFETs and IGBTs operating up to +600V. It features a floating channel for bootstrap operation, typically providing sourcing/sinking currents of 350mA/650mA. All channels have extended allowable negative VS swing to -9.8V for signal propagation at VDD=VBS=15V and are out of phase with input signals. The IC also includes matched propagation delay for all channels, is 3.3V and 5V input logic compatible, and has adjustable fault-clear timing. It is equipped with built-in advanced input filter, shoot-through prevention logic, soft turn-off function, and common-mode dv/dt noise-canceling circuit. The product has built-in UVLO functions for all channels and is suitable for applications such as 3-phase motor inverter driver, air conditioner, washing machine, refrigerator, dishwasher, industrial inverter, sewing machine, and power tools.

FAN7389 is a 600V high-voltage, high-speed driving MOSFET and IGBT three-phase half-bridge gate-drive IC with advanced input filter, anti-short circuit logic, soft turn-off function and other protection functions.

FAN7388 is a monolithic three half-bridge gate-drive IC designed for high-voltage, high-speed driving MOS-FETs and IGBTs operating up to +600V.