Xicor Manuals - Page 2

Xicor manuals, page 2

• XICOR X40010/X40011/X40014/X40015 Dual Voltage Monitor with Integrated CPU Supervisor handbook

  This document describes the features and characteristics of the X40010/X40011/X40014/X40015 Dual Voltage Monitor with Integrated CPU Supervisor, including dual voltage detection and reset assertion, independent core voltage monitor, fault detection register, selectable power on reset timeout and watchdog timer interval, low power CMOS design, and applications in communication equipment, industrial systems, and computer systems.

• XICOR X28C256 5 Volt Byte Alterable E 2 PROM handbook

  The X28C256 is a 32K x 8 E2PROM manufactured by Xicor using their proprietary high performance floating gate CMOS technology. Like all Xicor programmable nonvolatile memories, the X28C256 is a 5V only device.

• XICOR X25C02 DATA SHEET

  The X25C02 is a CMOS 2048-bit serial E2PROM, internally organized as 256 x 8. The X25C02 features a serial interface and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input, allowing any number of devices to share the same bus. The X25C02 also features two additional inputs that provide the end user with added flexibility. By asserting the HOLD input, the X25C02 will ignore transitions on its inputs, thus allowing the host to service higher priority interrupts. The WP input can be used as a hardwire input to the X25C02 disabling all write attempts, thus providing a mechanism for limiting end user capability of altering the memory. The X25C02 utilizes Xicor’s patented design and manufacturing techniques, including advanced automated processes, to ensure outstanding performance and reliability.

• Xicor X25080 Data Sheet

  The X25080 is a CMOS 8192-bit serial E2PROM, internally organized as 1K x 8. The X25080 features a Serial Peripheral Interface (SPI) and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input, allowing any number of devices to share the same bus. The X25080 also features two additional inputs that provide the end user with added flexibility.

• Xicor X24164 Data Sheet

  The X24164 is a CMOS 16,384 bit serial E2PROM, internally organized 2048 x 8. The X24164 features a serial interface and software protocol allowing operation on a simple two wire bus. Three device select inputs (S0–S2) allow up to eight devices to share a common two wire bus. Xicor E2PROMs are designed and tested for applications requiring extended endurance. Inherent data retention is greater than 100 years.

• Xicor X24022 Data Sheet

  The X24022 is a CMOS 2048 bit serial E2PROM, internally organized 256 x 8. The X24022 features a serial interface and software protocol allowing operation on a simple two wire bus. Three address inputs allow up to eight devices to share a common two wire bus. Xicor E2PROMs are designed and tested for applications requiring extended endurance. Inherent data retention is greater than 100 years. The X24022 is available in eight pin DIP and SOIC packages.

• XICOR X1205 Real Time Clock/Calendar

  This document describes the features and characteristics of the xicor 2-Wire ™ RTC Real Time Clock/Calendar. It has clock/calendar, 2 polled alarms, oscillator compensation, battery switch or super capacitor input, 2-Wire ™ interface, low power CMOS etc.

• XICOR Single Supply Low Power 256-tap 2-Wire bus X9269 Dual Digitally-Controlled (XDCP TM ) Potentiometers

  The X9269 is a digitally controlled potentiometer product launched by Xicor. It has dual channels, 256 resistor taps, 0.4% resolution, 2-wire serial interface, low power consumption and other features.

• Xicor X9311 handbook

  This is a pdf file that contains the use information of icminer electronic library service

• Xicor XM28C040 Data Sheet (1)

  XM28C040 is a high density 4 Megabit (512K x 8) module from Xicor company with 200ns access time, working temperature range of –55°C to +125°C. The module consists of four X28C010s mounted on a co-fired multilayered ceramic substrate. XM28C040 is configured as 512K x 8 bit and supports a 256-byte page write operation. The module also supports DATA Polling or Toggle Bit Polling, effectively providing a 39µs/byte write cycle, enabling the entire array to be rewritten in 10 seconds. XM28C040 provides the same high endurance and data retention as the X28C010.

• XICOR X9119 DATA SHEET

  This datasheet provides a detailed description of the features and characteristics of the X9119 Single Digitally-Controlled (XDCP ™) Potentiometer.

• XICOR X1288 DATA SHEET

  The X1288 is an integrated circuit produced by xicor, which integrates real-time clock, calendar, CPU supervisor and EEPROM.

• Xicor XM28C040 Data Sheet

  This document introduces the features of XM28C040, including high density, 4 megabits, 512Kx8, access time, base memory component, pinout, fast write cycle times, early end of write detection, data polling, toggle bit polling, software data protection, three temperature ranges, high reliability modules, all components are MIL-STD-883 compliant, endurance.

• Xicor X2804A X2804AI Data Sheet

  This is the copyright notice of the document

• XICOR X1228 handbook

  4K (512 x 8) 2-Wire ™ RTC is a EEPROM with Real Time Clock/Calendar/CPU Supervisor functions produced by Xicor