SMSC Manuals

USB2227/USB2228 is SMSC's fourth generation USB2.0 flash media controller that supports SmartMedia, xD Picture Card, Memory Stick, High Speed Memory Stick, Memory Stick PRO, MS Duo, Secure Digital, Mini-Secure Digital, TransFlash, MultiMediaCard, Reduced Size MultiMediaCard, NAND Flash, Compact Flash and CF Ultra I & II and Compact Flash form-factor ATA hard drives

LPC47S42x Enhanced Super I/O with LPC Interface for Server Applications is a product that operates at 3.3 volts (5V tolerant) and is designed for server applications. It features two floppy disk controllers, a multi-mode parallel port, two UARTs, an 8042 keyboard controller, an SMBus controller, an X-Bus interface, a programmable wakeup event interface, SMI support, GPIOs (39), fan speed control output, fan tachometer input, ISA IRQ to serial IRQ conversion, XNOR chain, PC99 and ACPI 1.0 compliance, ISA plug-and-play compatible register set, and intelligent auto power management.

SMSC USB2512i is a low power, OEM configurable, STT (Single transaction translator) hub controller IC with 2 downstream ports for embedded USB solutions.

SMSC USB2512 is a USB 2.0 high-low speed 2 port hub controller IC with 2 downstream ports, suitable for embedded USB solutions.

This product is a 10/100Mbps fast Ethernet controller with PCI bus interface, supports PCI 2.1 standard, supports CardBus status registers, supports two-channel bus master, supports scatter/gather DMA function, supports pre-fetch interrupt support, supports Wake-Up on Magic Packet TM detection and network link down event, supports chained transmission data packets, supports early transmit and early receive, supports optional early receive buffer mode, supports automatic rejection of small packets, supports automatic retransmission of collision frames, supports automatic padding of short frames, supports 4.5K bytes of receive buffer and 1.5K bytes of transmit buffer, supports optional 32-bit wide external receive buffer, supports big/little endian byte order, supports 64K bytes of expansion boot flash RAM

This document describes the capacitor selection for the internal regulator output pins of USB97C223 and USB97C243. Circuit diagrams and other relevant information are provided as illustrations of typical applications. It is noted that the information provided may not be sufficient for construction purposes and may contain inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice.

The EMC1002 is an SMBus temperature sensor that monitors up to two temperature zones and can generate two system interrupts. With ±1°C measurement accuracy, the EMC1002 provides a low-cost solution for critical temperature monitoring applications.

SMSC USB2507 is a 7-port hub with USB 2.0 compatibility integrated by SMSC company. It has 7 transaction translators, high performance, support high speed(480Mbits/s), full speed(12Mbits/s) and low speed(1.5Mbits/s), full power management, support per port or grouped, selectable power control, automatically detect bus power/self power source, and automatically switch mode.

SMSC SIO1000 is a super I/O product with LPC interface, FIR and consumer IR support.

SMSC USB2504/USB2504A is an integrated USB2.0 compatible 4-port hub with features including high-speed, full-speed, and low-speed compatibility, full power management, automatic detection of bus power/self-power source, etc.

FDC37C665GT/FDC37C666GT is a 2.88MB Super I/O Floppy Disk Controller from SMSC. It is based on the CMOS 765B Floppy Disk Controller core, has software and register compatibility, supports vertical recording format, and is 100% IBM compatible.

This datasheet provides detailed information on the SMSC LPC47M172, including product features, specifications, interfaces, and compatibility.

This document describes the features and characteristics of the FDC37B77x Enhanced Super I/O Controller, including 5V operation, PC98/99 and ACPI 1.0 compliance, ISA Plug-and-Play compatibility, intelligent auto power management, programmable wake-up event interface, system management interrupt, watchdog timer, 2.88MB Super I/O floppy disk controller, enhanced digital data separator, keyboard controller, etc.

This datasheet provides detailed information on the features and characteristics of the SMSC USB2504/USB2504A Integrated USB 2.0 Compatible 4-Port Hub.

LAN83C183 is a 10/100 Mbps TX/FX/10BT Fast Ethernet Physical Layer Device (PHY) with the following features: Single-Chip 100BASE-TX/FX/10BASE-T Fast Ethernet Physical Layer Solution, Dual-Speed - 10/100 Mbits/sec, Half-Duplex And Full-Duplex Support, MII Interface to Ethernet Controller, MI Interface for Configuration and Status, Optional Repeater Interface, AutoNegotiation: 10/100, Full/Half-Duplex, Meets All Applicable IEEE 802.3 Standards, On-Chip Wave Shaping - No External Filters Required, Adaptive Equalizer, Baseline Wander Correction, Interface to External 100BASE-T4 PHY, LED Outputs – Link – Activity – Collision – Full Duplex – 10/100 – User-Programmable, Many User Features and Options, Few External Components, 3.3V Supply with 5V-Tolerant I/O, 64-Pin TQFP Package (1.4-mm Body Thickness)