Key facts
- Manuals
- 11
- Models
- 1
- Languages
- ZH
- Last added
- 2012-07-10
Bühler models by category
Featured Bühler manuals
Bühler FF Moisture Detector Controller Installation Manual
The document explains how to install and connect the FF series moisture detector controllers, covering safety precautions, power connections, and wiring for the various controller types (FF‑19, FF‑HM, FF‑..‑U). It also describes operation, sensitivity adjustment, maintenance, and fault handling.
Key sections include safety notes, transportation and storage guidelines, detailed installation steps, wiring diagrams, operation and maintenance procedures, fault diagnosis, and disposal instructions, plus technical specifications and appendices. This manual is written in Chinese.
Covers: Overview · Important Safety Notes · Transportation and Storage · Installation and Wiring · Operation and Maintenance · Fault Diagnosis and Troubleshooting
Bühler BA 4000 Inj. Portable Oxygen Analyzer Installation and Operation Manual
The BA 4000 Inj. is a portable oxygen analyser designed for measuring low‑level oxygen in small‑volume gas samples, such as food packaging and insulated glass. Two variants (GV and KV) cover different sample volumes and use either an internal pump or an external vacuum pump.
This document explains how to install the analyser, connect electronics and gas lines, perform safe operation, calibrate with zero and span gases, and maintain the device, including battery handling and disposal procedures. This manual is written in Chinese.
Covers: Introduction · Safety Precautions · Transportation and Storage Requirements · Installation and Connection · Operation and Maintenance · Repair and Disposal
Bühler BA 2000 Flue Gas Oxygen Analyzer Installation and Use Manual
The BA 2000 is a flue‑gas oxygen analyzer that measures O₂ concentration using a zirconia (ZrO₂) sensor and an automatic heating element to prevent condensation. It is supplied with optional accessories such as flow filters, sampling probes and adapters.
This manual covers safe installation, electrical and pneumatic connections, calibration procedures (1‑point and 2‑point), normal operation, routine maintenance, safety warnings, and fault diagnosis. It also lists transport, storage, and disposal requirements and provides part numbers for spare components. This manual is written in Chinese.
Covers: Introduction · Safety Precautions · Nameplate Information · Product Description · Transportation and Storage Requirements · Installation and Connection
Bühler BA 4000 Oxygen Analyzer Installation and User Manual
The BA 4000 is a portable oxygen analyser that measures oxygen concentration in gases using the paramagnetic dumbbell ball principle. It is designed for use in a variety of non‑explosive environments and can operate on battery power or external mains.
This manual covers safety warnings, transportation and storage requirements, installation and wiring, operation procedures, calibration steps, filter and battery replacement, as well as repair, disposal and spare‑part information. This manual is written in Chinese.
Covers: Overview · Important Safety Notes · Transportation and Storage Requirements · Installation and Wiring Connections · Operation and Maintenance · Repair and Disposal
Latest Bühler manuals
Bühler Technologies GAS 222.21 technology data
This is a user manual for Huawei laptop. Huawei laptop computer uses the latest Intel Core i7 processor, with 8GB of RAM and 1TB hard drive, equipped with a 15.6-inch full HD display. The laptop is only 17.9mm thick and weighs only 1.8kg, making it very portable.
Bühler Technologies GAS 222 technology data
The document contains information about the features, characteristics, and technical specifications of the product. It provides detailed descriptions of the product's functions, performance, and application scope.
Bühler Technologies NS 10..-AM NS 25..-AM technology data
This document introduces the features and characteristics of a product produced by a company, such as its design, manufacturing process, performance, and uses.
Bühler Technologies P 2.4/2.2-ATEX P 2.4/2.82/2.84/2.2-AMEX technology data
The document describes the features and characteristics of a product, but further analysis is needed to provide specific details.
Bühler Motor 1.61.046.XXX technology data
1.61.046.XXX series DC gear motor, rated voltage 12V, 18V, 24V, power range 0.700-0.110W, motor speed range 35-420nN/min-1, maximum torque range 2.9-299.0mNm, can be modified according to needs, such as encoder, external demagnetization board, etc.
Bühler Motor 1.16.011.XXX technology data
This document is about the specification of STOCK SERVICE series products, mainly including rated data, no-load data, starting data, performance data, motor parameters, etc.
Bühler Motor 1.61.065.XXX technology data
STOCK SERVICE 1.61.065.XXX DC Gearmotor Datasheet
Bühler FF Moisture Detector Controller Installation Manual
Installation Guide 18 pages · 1.3 MB · ZHThis manual provides installation, wiring, operation, maintenance and troubleshooting instructions for Bühler FF moisture detector controllers.
Bühler BA 4000 Inj. Portable Oxygen Analyzer Installation and Operation Manual
User Manual 18 pages · 3.3 MB · ZHThe manual provides installation, operation, calibration, maintenance and safety instructions for the Bühler BA 4000 Inj. portable oxygen analyzer.
Bühler BA 2000 Flue Gas Oxygen Analyzer Installation and Use Manual
User Manual 27 pages · 3.1 MB · ZHThe installation and use manual for the Bühler BA 2000 flue gas oxygen analyzer provides setup, connection, calibration, operation, maintenance and…
Bühler BA 4000 Oxygen Analyzer Installation and User Manual
User Manual 15 pages · 1.7 MB · ZHThe Bühler BA 4000 portable oxygen analyzer installation and user manual provides safety guidelines, setup, operation, calibration and maintenance instructions.
Which document do I need?
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in Bühler manuals
How is the sensitivity of the controller adjusted?
Rotate the potentiometer counter‑clockwise until the alarm stops; for FF‑HM‑230, FF‑19 and ER‑145/A/Ex the adjustment is done in the same way.
From: Bühler FF Moisture Detector Controller Installation Manual
How often should the BA 4000 Inj. be calibrated?
Calibration is required after each warm‑up, after large pressure changes, after indoor temperature changes greater than 5 °C, and roughly once a month during normal operation.
From: Bühler BA 4000 Inj. Portable Oxygen Analyzer Installation and Operation Manual
What measurement principle does the BA 4000 Inj. use?
It uses a paramagnetic dumbbell‑ball sensor that detects the magnetic properties of oxygen in the measurement cell.
From: Bühler BA 4000 Inj. Portable Oxygen Analyzer Installation and Operation Manual
How often should the BA 2000 be calibrated?
Calibration should be performed after warm‑up before first use and regularly, recommended every two weeks.
From: Bühler BA 2000 Flue Gas Oxygen Analyzer Installation and Use Manual
What is the recommended maximum pressure for the instrument air (instrument wind) during operation?
The instrument‑wind pressure should not exceed 0.5 bar.
From: Bühler BA 2000 Flue Gas Oxygen Analyzer Installation and Use Manual
Can the BA 4000 be used in explosive atmospheres?
No. The device must not be operated in potentially explosive environments and should not have flammable or explosive gas mixtures passed through it.
From: Bühler BA 4000 Oxygen Analyzer Installation and User Manual