ST Manuals

VND5E050J-E and VND5E050K-E are double channel high-side drivers for automotive applications, featuring inrush current active management by power limitation, very low standby current, 3.0V CMOS compatible inputs, optimized electromagnetic emissions, and very low electromagnetic susceptibility.

VN5E050AJ-E is a single channel high-side driver manufactured in the ST proprietary VIPower M0-5 technology and housed in the tiny PowerSSO-12 package. The VN5E050AJ-E is designed to drive 12V automotive grounded loads delivering protection, diagnostics and easy 3V and 5V CMOS compatible interface with any microcontroller. The device integrates advanced protection features and diagnostics, including short circuit protection, over current protection, over temperature protection, under voltage protection, loss of ground protection, output short circuit protection, current detection failure protection, output shutdown protection, and current overcurrent protection, and supports 3.0V CMOS compatible inputs.

This document introduces the features and characteristics of VND5E050AJ-E and VND5E050AK-E. These two products are low-power dual channel high side drivers manufactured in the ST proprietary VIPower M0-5 technology and housed in the tiny PowerSSO-12 and PowerSSO-24 packages. These two products can drive 12V automotive grounded loads delivering protection, diagnostics and easy 3V and 5V supply.

The VND5E025AK-E is a double channel high-side driver manufactured in the ST proprietary VIPower M0-5 technology and housed in the tiny PowerSSO-24 package. The VND5E025AK-E is designed to drive 12 V automotive grounded loads delivering protection, diagnostics and an easy 3 V and 5 V CMOS compatible interface with any microcontroller. The device integrates analog current sense, programmable current limiting, short circuit protection, open load detection and thermal shutdown functions.

The SPC560B40x, SPC560B50x, SPC560C40x and SPC560C50x are a 32-bit MCU family based on the Power Architecture® for automotive body electronics applications.

This is a production data sheet on a 32-bit Power Architecture® based MCU for automotive powertrain applications.

This data sheet provides detailed information on the 32-bit Power Architecture® based MCU SPC560P44L3, SPC560P44L5 SPC560P50L3, SPC560P50L5 and its features and functions

This datasheet introduces the STA680 HD Radio™ baseband receiver production data. The receiver supports AM/FM hybrid and all-digital modes IBOC (in-band on-channel) digital audio broadcast signal decoding, as well as dual-channel HD 1.5 for background scanning and data services.

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

The L99DZ70XP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to five DC motors and five grounded resistive loads can be driven. It features six full bridges, two half bridges, two high side drivers, and supports temperature warning and protection, openload detection, over-current protection, etc.

SPC564A74B4, SPC564A74L7, SPC564A80B4, SPC564A80L7 are a family of 32-bit MCUs built on the embedded Power Architecture®. The products feature a 150 MHz e200z4 Power Architecture® core, variable length instruction encoding (VLE), superscalar architecture with 2 execution units, high-performance memory organization, fail-safe protection, configurable interrupt controller, multiple serial channels, multiple modules and interfaces, and more.

The VND5E025LK-E is a double channel high-side driver designed for automotive applications. It features analog current sense and various protections such as power limitation for inrush current management, low standby current, 3.0V CMOS compatible inputs, optimized electromagnetic emissions and susceptibility, compliance with EU directive 2002/95/EC, and very low current sense leakage. The driver also offers diagnostic functions, proportional load current sense, high precision for wide currents range, current sense disable, off state open load detection, output short to VCC detection, overload and short to ground indication, thermal shutdown indication, and more. It is suitable for driving resistive, inductive, and capacitive loads, and can be used as an LED driver.

L5300AH7 is a low dropout linear regulator with microprocessor control functions such as power on reset, low voltage reset, ON/OFF control. In addition, only low value ceramic capacitor is required for stability (above or equal 220 nF). Typical quiescent current is 60 µA at output current equal to 0 and enable high. It drops to 10 µA in “not enabled” mode. On chip trimming results in high output voltage accuracy (2%). Accuracy is kept over wide temperature range, line and load variation. The maximum input voltage is 40 V. The max output current is internally limited. Internal temperature protection disables the voltage regulator output.

L5300RPT is a low dropout linear regulator from STMicroelectronics with an output precision of 5V +/- 2%, a maximum input voltage of 40V and a maximum output current of 300mA.

The L5300GJ is a low dropout linear regulator with microprocessor control functions such as power on reset, low voltage reset, early warning, ON/OFF control. Typical quiescent current is 55 µA in very low output current mode and enabled regulator. It drops to 5µA with not enabled regulator. On-chip trimming results in high output voltage accuracy (2%). Accuracy is kept over wide temperature range, line and load variation. Early warning circuit monitors the input voltage and compares it with an internal voltage reference. The maximum input voltage is 40 V. The maximum output current is internally limited. Internal temperature protection disables the voltage regulator output. In addition, only low value ceramic capacitor on output is required for stability (equal or above 220 nF).