National Semiconductor manuals, page 56
National Semiconductor LM3886 Overture Audio Power Amplifier Series High-Performance 68W Audio Power Amplifier w/Mute handbook
LM3886 is a high-performance audio power amplifier from TI that delivers 68W of continuous average power and 0.1% THD+N, meeting the needs of various audio applications.
NATIONAL SEMICONDUCTOR LM3881 Power Sequencer handbook
LM3881 Power Sequencer offers the easiest method to control power up and power down of multiple power supplies (switching or linear regulators).
National Semiconductor LM380 2.5W Audio Power Amplifier handbook
LM380 is a 2.5W audio amplifier. The input signal can be ground referenced, the output voltage is automatically centered at one-half the supply voltage. There is short circuit protection and the output power range is wide. It can be used in various audio systems.
NATIONAL SEMICONDUCTOR LMV1089
The LMV1089 is a dual input, Clarisound Far Field Noise Suppression Microphone Amplifier with Automatic Calibration Capability
National Semiconductor LM27961 Dual-Display White LED Driver with 3/2x Switched Capacitor Boost handbook
LM27961 is a charge-pump-based white-LED driver that is ideal for mobile phone display backlighting. It can drive 4 LEDs for a main phone display backlight and 3 LEDs for a sub-display backlight. The driver provides excellent current and brightness matching in all LEDs. The LED driver current sources are split into two independently controlled groups. The primary group (Group A) can be used to backlight a main phone display with up to 4 LEDs, with low-side current drivers accommodating common-anode-type LEDs. The second group (Group B) can backlight a secondary display with up to 3 LEDs, with high-side current drivers accommodating common-cathode-type LEDs. Both Group A and Group B can also drive standard two-terminal LEDs, and provide other general lighting functions (keypad lighting, fun lighting, etc). The brightness of the two LED groups can be adjusted independently with external resistors. The LM27961 works off an extended Li-Ion input voltage range (2.7V to 5.5V), achieving voltage boost with a high-efficiency 3/2x-gain charge pump. The LM27961 is available in National’s chip-scale 18-bump micro SMD package.
NATIONAL SEMICONDUCTOR DS90CP04 1.5 Gbps 4x4 LVDS Crosspoint Switch handbook
The DS90CP04 1.5 Gbps 4x4 LVDS Crosspoint Switch is a digital cross-point switch produced by National Semiconductor Corporation. It uses Low Voltage Differential Swing (LVDS) technology for low power, high speed and low noise.
NATIONAL SEMICONDUCTOR LMH6611/LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers handbook
NATIONAL SEMICONDUCTOR LM2622 600kHz/1.3MHz Step-up PWM DC/DC Converter handbook
LM2622 is a National Semiconductor 1.6A, 0.2Ω internal switch, 600kHz/1.3MHz frequency selectable step-up DC/DC converter, suitable for TFT display voltage adjustment.
NATIONAL SEMICONDUCTOR LMV841/LMV842/LMV844 Manual
The LMV841/LMV842/LMV844 are low-voltage and low-power operational amplifiers that operate with supply voltages ranging from 2.7V to 12V and have rail-to-rail input and output capability. Their low offset voltage, low supply current, and MOS inputs make them ideal for sensor interface and battery-powered applications. The single LMV841 is offered in the space-saving 5-Pin SC70 package, the dual LMV842 in the 8-Pin MSOP and 8-Pin SOIC packages, and the quad LMV844 in the 14-Pin TSSOP and 14-Pin SOIC packages. These small packages are ideal solutions for area-constrained PC boards and portable electronics.
NATIONAL SEMICONDUCTOR LM2700 Manual
The LM2700 is a step-up DC/DC converter with a 3.6A, 0.08Ω internal switch and pin selectable operating frequency. With the ability to produce 500mA at 8V from a single Lithium Ion battery, the LM2700 is an ideal part for biasing LCD displays. The LM2700 can be operated at switching frequencies of 600kHz and 1.25MHz allowing for easy filtering and low noise.
NATIONAL SEMICONDUCTOR LM2742 Manual
The LM2742 is a high-performance synchronous switching buck regulator controller that can control currents of 0.7A to 20A with up to 95% conversion efficiencies.
NATIONAL SEMICONDUCTOR -LM3687 Step-Down DC-DC Converter with Integrated Low Dropout Regulator Startup Mode handbook
The LM3687 is a step-down DC-DC converter with an integrated low dropout Linear Regulator optimized for powering ultra-low voltage circuits from a single Li-Ion cell or 3 cell NiMH/NiCd batteries. It provides a dual output with fixed output voltages and combined load current up to 750mA in post regulation mode or 1100mA in independent mode of operation, over an input voltage range from 2.7V to 5.5V. There are several different fixed output voltage combinations available (refer to table 'Voltage Options'). The Linear Regulator being driven from the fixed output voltage of the buck converter (post regulation) translates to high efficiency. The device offers superior features and performance for mobile phones and similar portable applications with complex power management systems. Automatic intelligent switching between PWM low-noise and PFM low-current mode offers improved efficiency over the full load current range. During full-power operation, a fixed-frequency 1.8MHz (typ.) PWM mode drives loads from ~80mA to 750mA max. Hysteretic PFM mode extends the battery life through reduction of the quiescent current during light loads and system standby. The LM3687 also features internal protection against over-temperature, current overload and under-voltage conditions. Two enable pins allow the separate operation of either the DC-DC or the Linear Regulator.
NATIONAL SEMICONDUCTOR LM2753 High Power Switched Capacitor Voltage Convertor/Flash LED Driver Manual
The LM2753 is a high-power switched capacitor voltage converter/flash LED driver. It can drive a flash LED with a pulsed current of 400mA at an input voltage of 3.6V. The device uses a switched capacitor doubler and provides a regulated 5V output (VOUT) over an input supply range of 3.0V to 5.5V. The switched output, IOUT, takes less than 10ns to turn on and provide maximum current to a Flash LED. Flash LED current is set via a ballast resistor. Continuous illumination current (Torch Mode) is programmed by connecting a resistor between IOUT and VOUT. This device uses only three small, low-cost ceramic capacitors. The LM2753 uses Pulse Frequency Modulation (PFM) regulation. Typical operating frequency is 725kHz. Under no-load conditions, the LM2753 operates on only 60µA. If the output is connected to ground, the charge pump stays in the gain of 1 which helps limit the input current to 300mA (typ.). The LM2753 is available in a 10-pin No Pullback Leadless Lead-frame Package: LLP-10.
NATIONAL SEMICONDUCTOR LM3352 Manual
The LM3352 is a switched capacitor DC/DC converter from National Semiconductor. It can convert an input voltage from 2.5V to 5.5V to a stable output voltage of 2.5V, 3.0V or 3.3V, with a maximum output current of 200mA and an average efficiency of greater than 80%. The switching frequency is 1MHz. The device is available in a 16-pin TSSOP package, with low operating and standby current, making it ideal for portable and handheld applications.
NATIONAL SEMICONDUCTOR LMP7707/LMP7708/LMP7709 Manual
LMP7707/LMP7708/LMP7709 is a precision, CMOS input, RRIO, wide supply range decompensated amplifier.