Maxim manuals, page 82
MAXIM MAX19994A Dual SiGe High-Linearity 1200MHz to 2000MHz Downconversion Mixer with LO Buffer/Switch handbook
The MAX19994A dual-channel downconverter is designed to provide 8.4dB of conversion gain, +25dBm input IP3, +14dBm 1dB input compression point, and a noise figure of 9.8dB for 1200MHz to 2000MHz diversity receiver applications.
MAXIM MAX19993 handbook
The MAX19993 is a dual-channel downconverter designed for diversity receiver applications in the frequency range of 1200MHz to 1700MHz. It offers 6.4dB conversion gain, +27dBm input IP3, 15.4dBm 1dB input compression point, and a noise figure of 9.8dB. The MAX19993 also provides excellent linearity and noise performance, and features integrated double-balanced passive mixer cores, LO buffers, a dual-input LO selectable switch, and a pair of differential IF output amplifiers.
MAXIM MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 handbook
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverter mixers are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are mixed with signals at the local oscillator (LO) port using a double-balanced mixer. These upconverter mixers operate with IF input frequencies between 40MHz and 500MHz, and upconvert to output frequencies as high as 2.5GHz. These devices offer a wide range of supply currents and output intercept levels to optimize system performance. Supply current is essentially constant over the specified supply voltage range. Additionally, when the devices are in a typical configuration with VSHDN = 0, a shutdown mode reduces the supply current to less than 1µA. The MAX2660/MAX2661/MAX2663/MAX2671 are offered in the space-saving 6-pin SOT23 package. For applications requiring balanced IF ports, choose the MAX2673 in the 8-pin µMAX package.
MAXIM MAX2039 handbook
MAX2039 is a high-linearity passive upconverter or downconverter mixer designed to support UMTS/WCDMA, DCS, and PCS base-station transmitter or receiver applications with an RF frequency range of 1700MHz to 2200MHz, NF of 7.3dB, and conversion loss of 7.1dB. The IIP3 is typically +34.5dBm and +33.5dBm for downconversion and upconversion operation, respectively. With an LO frequency range of 1500MHz to 2000MHz, this particular mixer is ideal for low-side LO injection architectures. (For a pin-to-pin-compatible mixer meant for high-side LO injection, contact the factory.) In addition to offering excellent linearity and noise performance, the MAX2039 also yields a high level of component integration. This device includes a double-balanced passive mixer core, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for a single-ended RF input for downconversion (or RF output for upconversion), and single-ended LO inputs. The MAX2039 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 135mA. The MAX2039 is pin compatible with the MAX2031 815MHz to 995MHz mixer, making this family of passive upconverters and downconverters ideal for applications where a common PC board layout is used for both frequency bands. The MAX2039 is available in a compact 20-pin thin QFN package (5mm x 5mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C range.
MAXIM MAX2031 handbook
The MAX2031 is a high-linearity passive upconverter or downconverter mixer designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications.
MAXIM MAX2041 High-Linearity 1700MHz to 3000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch handbook
The MAX2041 high-linearity passive upconverter or downconverter mixer is designed to provide 7.4dB NF and a 7.2dB conversion loss for an RF frequency range of 1700MHz to 3000MHz to support UMTS/WCDMA, DCS, PCS, and WiMAX base-station transmitter or receiver applications. The IIP3 is typically +33.5dBm for both downconversion and upconversion operation. With an LO frequency range of 1900MHz to 3000MHz, this particular mixer is ideal for high-side LO injection architectures. (For a pin-compatible mixer meant for low-side LO injection, refer to the MAX2039.) In addition to offering excellent linearity and noise performance, the MAX2041 also yields a high level of component integration. This device includes a double-balanced passive mixer core, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for a single-ended RF input for downconversion (or RF output for upconversion), and single-ended LO inputs. The MAX2041 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 145mA. The MAX2041 is pin compatible with the MAX2031 815MHz to 995MHz mixer, making this family of passive upconverters and downconverters ideal for applications where a common PC board layout is used for both frequency bands. The MAX2041 is available in a compact 20-pin thin QFN package (5mm x 5mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.
MAXIM MAX2043 handbook
The MAX2043 high-linearity passive upconverter or downconverter mixer is designed for UMTS/WCDMA, DCS, PCS, and WiMAX base-station applications, offering high linearity, low noise, and high component integration.
MAXIM MAX2029 High-Linearity 815MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch handbook
The MAX2029 is a high-linearity passive upconverter or downconverter mixer designed for GSM/cellular base-station transmitter or receiver applications.
MAXIM MAX2051 SiGe High-Linearity 850MHz to 1550MHz Up/Downconversion Mixer with LO Buffer handbook
The MAX2051 is a high-linearity, up/downconversion mixer that provides +35dBm input IP3, 7.8dB noise figure (NF), and 7.4dB conversion loss for 850MHz to 1550MHz wireless infrastructure and multicarrier cable head-end downstream video, video-on-demand (VOD), and cable modem termination systems (CMTS) applications.
MAXIM MAX2042 handbook
The MAX2042 is a single, high-linearity upconversion/down-conversion mixer that provides +36dBm IIP3, 7.3dB noise figure, and 7.2dB conversion loss for 2000MHz to 3000MHz WCS, LTE, WiMAXK, and MMDS wireless infrastructure applications.
MAXIM MAX2032 High-Linearity 650MHz to 1000MHz Upconversion/ Downconversion Mixer with LO Buffer/Switch handbook
The MAX2032 is a high-linearity passive upconverter/downconverter mixer that provides +33dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support a multitude of base-station applications.
MAXIM MAX2044 handbook
The MAX2044 is a high linearity, ultra-wideband single-chip up/downconverter that is ideal for 2.3-4GHz LTE, WiMAXK and MMDS wireless infrastructure applications.
MAXIM MAX2042A handbook
The MAX2042A is a SiGe high-linearity, 1600MHz to 3900MHz upconversion/downconversion mixer with LO buffer
MAXIM MAX5180/MAX5183 Dual 10-Bit 40MHz Current/Voltage Simultaneous-Output DACs handbook
The MAX5180 contains two 10-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal specifications, with on-chip precision resistors for voltage output operation. The devices are designed for 10pVs glitch operation to minimize unwanted spurious signal components at the output.
MAXIM MAX5186/MAX5189 handbook
The MAX5186/MAX5189 are dual 8-bit simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation.