Texas Instruments manuals, page 75
TEXAS INSTRUMENTS bq24201 handbook
This document is a typical application description of the bq2420x series, which details the product's features and characteristics.
TEXAS INSTRUMENTS TPS68000 Manual
The document describes the features and characteristics of the TPS68000 highly efficient phase shift full bridge CCFL controller, including input voltage range, full bridge topology with integrated gate drives, synchronizable constant frequency operation, etc.
TEXAS INSTRUMENTS TPS54620 Manual
The document describes a product called TPS54620, which is a full-featured 17V, 6A synchronous step-down converter. It features high efficiency, integrated high-side and low-side MOSFETs, adjustable input undervoltage lockout, and support for SwitcherPro™ software tool.
TEXAS INSTRUMENTS TPS2375/TPS2376/TPS2377 Manual
The TPS2375/77 is TI’s second generation IEEE 802.3af PoE powered device controller with 100-V ratings and a 0.58-Ω low-side switch. It integrates all the necessary features to develop a compliant powered device (PD).
TEXAS INSTRUMENTS BB OPA604 FET-Input Low Distortion OPERATIONAL AMPLIFIER Manual
The document describes the features of OPA604, including low distortion, low noise, high slew rate, wide gain-bandwidth, etc. It also provides information about the applications and description of the product.
TEXAS INSTRUMENTS UCC2800/2801/2802/2803/2804/2805-Q1 DATA SHEET
This file is about UCC2800 series, it is a dc-to-dc fixed frequency current mode switching power supply controller, with built-in soft start function, which can meet automotive application scenarios
TEXAS INSTRUMENTS TPS74401 Manual
The TPS74401 is a low-dropout (LDO) linear regulator that provides an easy-to-use robust power management solution for a wide variety of applications.
TEXAS INSTRUMENTS - DRV1100 handbook
The DRV1100 is a fixed gain differential line driver designed for very low harmonic distortion at the high powers required of xDSL line interface standards. Operating on a single +5V supply, it can deliver 230mA peak output current and 9.5Vp-p differential output voltage swing.
TEXAS INSTRUMENTS UCC1807-1/-2/-3 UCC2807-1/-2/-3 UCC3807-1/-2/-3 handbook
The UCC3807 family is a programmable maximum duty cycle PWM controller designed for off-line and dc-to-dc fixed frequency current mode switching power supplies. It features high speed, low power consumption, internal full cycle soft start, and internal leading edge blanking of the current sense input.
TEXAS INSTRUMENTS UCC2891 handbook
The UCC2891/2/3/4 family of PWM controllers is designed to simplify implementation of the various active clamp/reset switching power topologies. The UCC289x is a peak current-mode, fixed-frequency, high-performance pulse width modulator. It includes the logic and the drive capability for the auxiliary switch with a simple method of programming the critical delays for proper active clamp operation. The UCC2891/3 includes a 110-V start-up regulator for initial start-up and to provide keep-alive power during stand-by. Additional features include an internal programmable slope compensation circuit, precise DMAX limit, and a single resistor programmable synchronizable oscillator.
TEXAS INSTRUMENTS TPS61020 TPS61024 TPS61025 TPS61027 TPS61028 handbook
TPS61020 is a 96% efficient synchronous boost converter from TI. It provides 200mA output current and can operate with an input voltage range of 0.9V to 6.5V.
TEXAS INSTRUMENTS UCC1583 UCC2583 UCC3583 Data Sheet
UCC3583 is a synchronizable secondary side post regulator for precision regulation of the auxiliary outputs of multiple output power supplies. It contains a leading edge pulse width modulator, which generates the gate drive signal for a FET power switch connected in series with the rectifying diode. The turn-on of the power switch is delayed from the leading edge of the secondary power pulse to regulate the output voltage.
TEXAS INSTRUMENTS - TLV2470 TLV2471 TLV2472 TLV2473 TLV2474 TLV2475 TLV247xA handbook
the tlv2470 is a low-power, high-drive cmos switching power supply amplifier that offers 2.8mhz of gain-bandwidth product, operating over a supply voltage range of 2.7v-6v. it is available in 5- or 6-pin sot-23 and 8- or 10-pin msop packages.
TEXAS INSTRUMENTS - ADS7818 handbook
The ADS7818 is a 12-bit sampling analog-to-digital converter (A/D) complete with sample/hold, internal 2.5V reference, and synchronous serial interface. It has low power, small size, and high-speed characteristics, making it ideal for battery operated systems such as wireless communication devices, portable multi-channel data loggers, and spectrum analyzers. It also provides low-cost isolation for remote data acquisition.
TEXAS INSTRUMENTS TPA2005D1-Q1 1.4-W MONO FILTER-FREE CLASS-D AUDIO POWER AMPLIFIERhandbook
The TPA2005D1 is a 1.4-W high-efficiency filter-free class-D audio power amplifier in a MicroStar Junior™ BGA, QFN, or MSOP package that requires only three external components.