This page provides manuals, user guides, handbooks, instructions, specification, instruction, maintenance manual for Fairchild Automation control Equipment, Electronic Original, ...
The FDS6892AZ is a dual N-Channel Logic Level PWM Optimized PowerTrench MOSFET produced by Fairchild Semiconductor, which is well suited for low voltage and battery powered applications where low in-line power loss and fast switching are required.
This document is about FOD817 phototransistor optocouplers, which consists of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 4-pin dual in-line package.
The document provides information about the GMA8475C supplier and precautions for using the product. The product is not suitable for life support devices or systems, and Fairchild Semiconductor Corporation does not assume any liability for the use of the product.
The ISL9N304AP3/ISL9N304AS3ST is an N-channel logic level UltraFET® trench MOSFET with a drain-to-source voltage of 30V, a maximum drain current of 75A, and an on-resistance of 4.5mΩ. This device utilizes advanced trench MOSFET technology and features low gate charge and low on-resistance. It is optimized for switching applications, improving the overall efficiency of DC/DC converters and enabling operation at higher switching frequencies.
The document describes a specially designed offline switch mode power supply module (SPS) with precision fixed operating frequency and various protection features. The SPS consists of a high voltage power SenseFET and a current mode PWM controller IC, which can reduce component count, design size, and weight, while increasing efficiency, productivity, and system reliability.
KA278RXXC series voltage regulator is a TO-220 full mold package 4 pin, with 2A current output, adjustable output voltage range of 1.25-32V, with over current protection, thermal shutdown, overvoltage protection, short circuit protection and other functions.
The 74VCX32244 is a low voltage 32-bit buffer/line driver with 3.6V tolerant inputs and outputs. It contains thirty-two non-inverting buffers with 3-STATE outputs that can be used for memory and address driving, clock driving, or bus-oriented transmission/reception. The device is controlled in nibbles (4-bit). Each nibble has separate 3-STATE control inputs that can be shorted together for 8-bit, 16-bit, or full 32-bit operation. The 74VCX32244 is designed for low voltage (1.2V to 3.6V) VCC applications with I/O capability up to 3.6V. It is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation.
The 74VHC4066 is a quad analog switch with low on-resistance and low off-leakage. It is a bidirectional switch, so any analog input can be used as an output and vice versa.
This document describes the features and characteristics of the 2N5306 Discrete POWER & Signal Technologies NPN Darlington Transistor. It is designed for applications requiring extremely high current gain, up to 1.0A.
The ILC5062 is a precision voltage monitor from Fairchild Semiconductor with low power consumption and high accuracy. It is suitable for a variety of microprocessor power supply monitoring applications.
The MC78LXXA is a 3-terminal, 0.1A positive voltage regulator produced by FAIRCHILD SEMICONDUCTOR. The maximum output current is 100mA, the output voltage is 5V, 6V, 8V, 9V, 10V, 12V, 15V, 18V and 24V, and it has thermal overload protection and short circuit current limiting functions. The output voltage is offered in ± 5% tolerance.
This document details the features and characteristics of the KSR1105 NPN Epitaxial Silicon Transistor, including absolute maximum ratings, electrical characteristics, symbol parameters test conditions, etc.
The TMC2242A/B are fixed-coefficient linear-phase half-band (low-pass) digital filters. They can be used to halve or double the sampling rate of a digital signal. When used as a decimating post-filter with a double-speed oversampling A/D converter, they greatly reduce the cost and complexity of anti-aliasing filters required ahead of the A/D converter. When used as an interpolating pre-filter with a double-speed oversampling D/A converter, the TM2242A/B can provide very low passband ripple and up to 59.4 dB of stopband rejection.
This is a PDF document about N-Channel Enhancement Mode Field Effect Transistor. The document introduces the features and characteristics of the product.
