ANALOG Manuals

The ADM1072 is a logic controlled, dual P-channel switch with low on resistance and a built-in current limiter, capable of sourcing up to 1A from supply voltages between 2.7V and 5.5V. In addition to logic inputs that switch each channel on and off, the device has a standby input that switches the output current limit, making it ideal for use with USB peripherals. In normal operating mode and Standby mode the output current limit is 100mA.

The ADM1070 is a 48V hot swap controller from Analog Devices that provides safe board insertion and removal, prevents overcurrent and short circuit, and provides overvoltage and undervoltage detection.

The ADM1069 is a Super Sequencer™ with Margining Control. It provides complete supervisory and sequencing solution for up to 8 supplies. It has a variety of features that make it very useful in power monitoring and regulation applications.

Super Sequencer™ and Monitor ADM1068 Rev. 0 is a complete supervisory and sequencing solution for up to 8 supplies. It features 8 supply fault detectors that enable supervision of supplies to better than 1% accuracy. It also has 4 selectable input attenuators that allow supervision of supplies. It further includes 4 dual-function inputs, 8 programmable output drivers, and a sequencing engine for state machine control of outputs.

The ADM1170 is a hot swap controller that allows safe insertion and removal of a board from a live backplane. It controls supply voltages from 0.6V to 16.5V and has a supply voltage range from 2.7V to 16.5V. It features true soft start controls for inrush current profile, adjustable analog current limit with circuit breaker, fast response limits peak fault current, automatic retry or latch-off on current fault, charge pumped gate drive for external N-FET switch, and undervoltage lockout. The ADM1170 is suitable for hot swap board insertion, electronic circuit breaker, and industrial high side switch/circuit breaker.

ADM1065 is the Analog Devices Super Sequencer and Monitor. It can monitor and control up to 10 supplies and provides a wide range of output drivers and power fault detection features.

The ADM1064 is a power monitor and sequencer that monitors up to 10 supplies and provides 10 output drivers and an internal sequencing engine.

The document describes the ADM1063 Rev. 0 Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring. It provides a complete supervisory and sequencing solution for up to 10 supplies. The device features 10 supply fault detectors with better than 1% accuracy, 5 selectable input attenuators for supplies up to 14.4V, 5 dual-function inputs, and 10 programmable output drivers. It also includes a sequencing engine for state machine control of the output drivers.

ADM1062 is a Super Sequencer™ with Margining Control and Temperature Monitoring. It is a complete supervisory and sequencing solution for up to 10 supplies. 10 supply fault detectors enable supervision of supplies to better than 1% accuracy

The document is about the preliminary technical data of ADM1060 Communications System Supervisory/Sequencing Circuit. It describes the features and characteristics of the product.

The ADM1052 is a dual, precision, voltage regulator controller intended for power rail generation and active bus termination on personal computer motherboards. It contains a precision 1.2V bandgap reference and two channels consisting of control amplifiers driving external power devices. Each channel has a shutdown input to turn off amplifier output and 'Hiccup Mode' protection circuitry for the external power device. The ADM1052 operates from a 12V supply and features low quiescent current and low shutdown current.

The ADM1051/ADM1051A is a dual voltage regulator controller produced by Analog Devices, with 1.515V and 1.818V outputs, support PC motherboard TYPEDET signal, low quiescent current and low shutdown current.

ADM1041 is a secondary-side controller with current share and housekeeping features. It integrates current sharing and management functions, reducing the number of components in the system, lowering costs, and improving efficiency. The device also has a range of protection functions, such as overvoltage protection, undervoltage protection, and overcurrent protection, to ensure safe and stable system operation.

ADM1041 is a secondary-side controller with current share and housekeeping. It features digital calibration, SSI specification support, comprehensive fault detection, reduced component count on the secondary side, standalone or microcontroller control.

This document introduces the features of ADM1040 power supply monitoring chip, including monitoring multiple voltage rails, current, fan speed, temperature, etc.