TEXAS Manuals (Others)

SN54HC245, SN74HC245 are octal bus transceivers with 3-state outputs. They feature a wide operating voltage range, high-current 3-state outputs, low power consumption, and low input current.

File format: PDF Size:534 KB

This document describes the features and characteristics of the INA105 precision single-supply differential amplifier, including gain, CMR, nonlinearity, etc.

File format: PDF Size:326 KB

TLV5604 is a 10-bit 3 µS quad digital-to-analog converter (DAC) with a flexible 4-wire serial interface from TI. It has a flexible 4-wire serial interface that allows glueless interface to TMS320, SPI, QSPI, and Microwire serial ports. The TLV5604 is programmed with a 16-bit serial word comprised of a DAC address, individual DAC control bits, and a 10-bit DAC value. The device has provision for two supplies: one digital supply for the serial interface (via pins DVDD and DGND), and one for the DACs, reference buffers and output buffers (via pins AVDD and AGND). Each supply is independent of the other and can be used independently.

File format: PDF Size:576 KB

The document is about DAC6573, including product features, characteristics and application scenarios.

File format: PDF Size:624 KB

This document is an introduction to UCD9240, which is a multi-output multi-phase non-isolated DC/DC PWM power supply controller that supports multiple soft-start and soft-stop configurations, including prebias start-up.

File format: PDF Size:1130 KB

The TPS2456 is a dual, 12 V, channel protection and blocking (ORing) controller that provides inrush control, current limiting, overload protection, and reverse current blocking. It also supports hotswap and multiple input ORing.

File format: PDF Size:1028 KB

TLC5620C and TLC5620I are quadruple 8-bit voltage output digital-to-analog converters (DACs) with buffered reference inputs (high impedance).

File format: PDF Size:196 KB

The TLV5620C and TLV5620I are quadruple 8-bit voltage output digital-to-analog converters (DACs) with buffered reference inputs (high impedance). The DACs produce an output voltage that ranges between either one or two times the reference voltages and GND; and, the DACs are monotonic. The device is simple to use, because it runs from a single supply of 3 V to 3.6 V. A power-on reset function is incorporated to ensure repeatable start-up conditions. Digital control of the TLV5620C and TLV5620I is over a simple three-wire serial bus that is CMOS compatible and easily interfaced to all popular microprocessor and microcontroller devices. The 11-bit command word comprises eight bits of data, two DAC select bits, and a range bit, the latter allowing selection between the times 1 or times 2 output range. The DAC registers are double buffered, allowing a complete set of

File format: PDF Size:197 KB

This datasheet introduces the features of TI's DAC7718 chip, including voltage output range, resolution, power consumption, etc.

File format: PDF Size:1481 KB

The document describes the features and characteristics of a 12-bit, 4-channel serial output sampling analog-to-digital converter.

File format: PDF Size:318 KB

The LM4040 series of shunt voltage references are versatile, easy-to-use references that cater to a vast array of applications. The 2-pin fixed-output device requires no external resistors or capacitors for operation and is stable with all capacitive loads. Additionally, the reference offers low dynamic impedance and low noise, providing stable performance under a wide variety of conditions.

File format: PDF Size:401 KB

The SN74LVC32244 is a 32-bit buffer/driver from TI. It operates from 1.65-3.6V and supports 5V input/output. It can be used in 3.3V/5V mixed systems.

File format: PDF Size:240 KB

TPA2028D1 is a TI launched 3W mono filter-free Class-D audio power amplifier with volume control, dynamic range compression (DRC) and automatic gain control (AGC). It supports I2C interface configuration DRC/AGC parameters, which can realize automatic prevention of distortion, enhancement of details, protection of speakers and compression of dynamic range.

File format: PDF Size:1898 KB

This is a MSP430 User's Guide SLAU101A from Texas Instruments

File format: PDF Size:392 KB

The ADS1294/6/8 family is a highly integrated and high-performance 8-channel 24-bit analog front-end chip for biopotential measurements. It features low power consumption, flexible input multiplexer, and programmable gain, making it suitable for scalable medical instrumentation systems.

File format: PDF Size:963 KB

This product is an 8-bit transparent D latch with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads.

File format: PDF Size:393 KB

SN54LVC573A and SN74LVC573A are two transparent D-type latches that are designed for 2.7-V to 3.6-V VCC and 1.65-V to 3.6-V VCC operation.

File format: PDF Size:800 KB

The TLV5535 is an 8-bit, 35 MSPS, high-speed A/D converter from TI. It converts the analog input signal into 8-bit binary-coded digital words up to a sampling rate of 35 MHz. All digital inputs and outputs are 3.3 V TTL/CMOS-compatible. The device consumes very little power due to the 3.3-V supply and an innovative single-pipeline architecture implemented in a CMOS process. The user obtains maximum flexibility by setting both bottom and top voltage references from user-supplied voltages. If no external references are available, on-chip references are available for internal and external use. The full-scale range is 1 Vpp up to 1.6 Vpp, depending on the analog supply voltage. If external references are used, the input range can be extended to 4 Vpp.

File format: PDF Size:724 KB

SN54ACT574, SN74ACT574 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS. Operates at 4.5V-5.5V, input voltages up to 5.5V, max tpd of 9 ns at 5 V, and TTL voltage compatible inputs.

File format: PDF Size:383 KB

The SN54LVC574A and SN74LVC574A are 8-bit edge-triggered D-type flip-flops, operating in the 2.7V to 3.6V VCC voltage and 3.3V VCC voltage respectively. Their inputs can accept voltages up to 5.5V, operating temperature range is -40°C to 85°C, -40°C to 125°C and -55°C to 125°C, maximum tpd is 7ns, typical VOLP (output ground bounce) is less than 0.8V, typical VOHV (output VOH undershoot) is greater than 2V. They support mixed-mode signal operation on all ports (5V input/output voltage with 3.3V VCC), Ioff supports partial power-down mode operation, latch-up performance exceeds 250 mA, ESD protection exceeds JEDEC 22 (2000V Human-Body Model (A114-A), 200V Machine Model (A115-A), 1000V Charged-Device Model (C101)).

File format: PDF Size:927 KB