TEXAS Manuals (Others)

The TPS71xx integrated circuits are a family of micropower low-dropout (LDO) voltage regulators. They achieve an order of magnitude reduction in dropout voltage and quiescent current compared to conventional LDO performance by replacing the typical pnp pass transistor with a PMOS device. These products feature very low dropout voltage, extremely low quiescent current, extremely low sleep-state current, and a wide output current range.

File format: PDF Size:692 KB

This document introduces the characteristics and features of TLC5905 LED driver, including drive capability and output counts, constant current output range, constant current accuracy, voltage applied to constant current output terminals, 256 gray scale display, brightness adjustment, error output signal detection, data output timing selectable, OVM (output voltage monitor), WDT (watchdog timer), TSD (thermal shut down) and more

File format: PDF Size:414 KB

The document describes the features, applications, and functions of RHB DAP www.ti.com. It is a 16-channel LED driver with dot correction, suitable for monocolor, multicolor, and full-color LED displays as well as LED backlighting applications. The driver provides high-precision constant-current output and can be controlled via a serial data interface.

File format: PDF Size:909 KB

The THS7375 is a low-power, single-supply, 3 V to 5 V four-channel integrated video buffer. It incorporates a sixth-order Butterworth filter that is useful as a digital-to-analog converter (DAC) reconstruction filter or an analog-to-digital converter (ADC) anti-aliasing filter. The THS7375 has versatile input biasing and can be configured for either ac or dc-coupled inputs.

File format: PDF Size:934 KB

The INA117 is a precision unity-gain difference amplifier with very high common-mode input voltage range. It is a single monolithic IC consisting of a precision op amp and integrated thin-film resistor network.

File format: PDF Size:487 KB

tps6205x is a high efficiency synchronous step-down converter from ti, with a maximum output current of 800ma, an operating voltage range of 2.7-10v, an output voltage range of 0.7-6v, support for fixed output voltages of 1.5v, 1.8v, and 3.3v, and synchronization with external clock signals with a maximum frequency of 1.2mhz. it has the characteristics of high efficiency and low static current.

File format: PDF Size:618 KB

File format: PDF Size:0 KB

This is a data manual for TMS320VC5421 fixed-point digital signal processor

File format: PDF Size:1270 KB

The 'AC245 octal bus transceivers are designed for asynchronous two-way communication between data buses. It operates in the voltage range of 2V to 6V and accepts input voltages up to 6V. The control-function implementation minimizes external timing requirements. When the output-enable (OE) is low, the device passes noninverted data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction control (DIR) input. A high on OE disables the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

File format: PDF Size:538 KB

TLV571 is a 1-channel 8-bit parallel analog-to-digital converter with a supply voltage range of 2.7V to 5.5V. It features a fast throughput rate, wide analog input range, low power consumption, and is suitable for applications such as mass storage and HDD, automotive, digital servos, process control, and general-purpose DSP.

File format: PDF Size:406 KB

TLC7528C, TLC7528E, TLC7528I are dual, 8-bit, digital-to-analog converters (DACs) manufactured by Texas Instruments (TI). It has 8-bit resolution, 2- or 4-quadrant multiplying, and can receive 8-bit parallel data. It operates at a supply voltage of 5V-15V and dissipates less than 15mW.

File format: PDF Size:251 KB

INA193-INA198 is a voltage output current shunt monitor that can sense drops across shunts at common-mode voltages from −16V to +80V, independent of the INA19x supply voltage. They are available with three output voltage scales: 20V/V, 50V/V, and 100V/V. The 500kHz bandwidth simplifies use in current control loops. INA193-INA195 provide identical functions but alternative pin configurations to the INA196-INA198, respectively. INA193-INA198 operate from a single +2.7V to +18V supply, drawing a maximum of 900µA of supply current. They are specified over the extended operating temperature range (−40°C to +125°C), and are offered in a space-saving SOT23 package.

File format: PDF Size:464 KB

The ADS7862 is a 12-bit, 500kHz analog-to-digital converter from TI that features 4 fully differential input channels that can be grouped into two pairs for high-speed simultaneous signal acquisition. It also supports a parallel interface and control inputs to minimize software overhead. The device is available in a TQFP-32 package and operates over a temperature range of -40°C to +85°C.

File format: PDF Size:377 KB

TPIC2810 is a monolithic, medium- voltage, low-current, 8-bit shift register design to drive low-side switched resistive loads such as LEDs. The device contains an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Data transfers through the shift register via an I2C bus interface.

File format: PDF Size:344 KB

This document introduces the TPS793xx series of low-dropout linear regulators. The series features high power supply rejection ratio (PSRR), ultralow noise, fast start-up, and excellent line and load transient responses in NanoStar wafer chip scale and SOT23 packages. NanoStar packaging gives an ultrasmall footprint as well as an ultralow profile and package weight, making it ideal for portable applications such as handsets and PDAs.

File format: PDF Size:564 KB

The OPA2604 is a dual, FET-input operational amplifier designed for enhanced AC performance. It offers features such as low distortion, low noise, high slew rate, and wide gain-bandwidth, making it suitable for high-quality audio and other applications requiring excellent dynamic performance.

File format: PDF Size:316 KB

File format: PDF Size:0 KB

The UAF42 is a monolithic active filter from TI that can be configured for a wide range of low-pass, high-pass, and band-pass filters. It features a classic state-variable analog architecture with an inverting amplifier and two integrators. The integrators include on-chip 1000pF capacitors trimmed to 0.5%.

File format: PDF Size:294 KB

This document describes the features and characteristics of the SLLS397A model, including support for multiple input clocks, large capacity FIFO buffers, programmable flow control, and interrupt generation.

File format: PDF Size:666 KB

File format: PDF Size:0 KB