TEXAS Manuals (Others)

TEXAS INSTRUMENTS SN5420/SN54LS20/SN54S20/SN7420/SN74LS20/SN74S20 Manual

Texas Instruments and its subsidiaries reserve the right to make changes to their products or to discontinue any product or service without notice. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.

File format: PDF Size:255 KB

TEXAS INSTRUMENTS CY74FCT163374/CY74FCT163H374 Manual

CY74FCT163374 and CY74FCT163H374 are 16-bit registers designed for use as buffered registers in high-speed, low power bus applications. They can be used as two independent 8-bit registers or as a single 16-bit register by connecting the output enable (OE) and clock (CLK) inputs. The outputs are 24-mA balanced output drivers with current limiting resistors to reduce the need for external terminating resistors, and provide for minimal undershoot and reduced ground bounce.

File format: PDF Size:116 KB

TEXAS INSTRUMENTS DRV593 DRV594 Manual

The DRV593 and DRV594 are high-efficiency, high-current power amplifiers ideal for driving a wide variety of thermoelectric cooler elements in systems powered from 2.8 V to 5.5 V. The operation of the device requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. Pulse-width modulation (PWM) operation and low output stage on-resistance significantly decrease power dissipation in the amplifier. The DRV593 and DRV594 are internally protected against thermal and current overloads. Logic-level fault indicators signal when the junction temperature has reached approximately 115°C to allow for system-level shutdown before the amplifier’s internal thermal shutdown circuitry activates. The fault indicators also signal when an overcurrent event has occurred. If the overcurrent circuitry is tripped, the device will perform a system-level shutdown.

File format: PDF Size:239 KB

TEXAS INSTRUMENTS TUSB6020 Manual

The TUSB6020 is a USB 2.0 high-speed On-the-Go dual-role controller, featuring a USB On-the-Go controller core and an integrated USB 2.0 OTG PHY. It can operate either as a function controller for a USB peripheral or as the host/peripheral in point-to-point communications. The product is fully compliant with the USB 2.0 standard and USB 2.0 transceiver macrocell interface, supporting optimized one-port operation at low speed (1.5 Mbps), full speed (12 Mbps), and high speed (480 Mbps). It also supports the USB 2.0 supplement to OTG specification, with protection circuitry to withstand possible VBUS short, support for session request protocol (SRP) and host negotiation protocol (HNP), suspend-and-resume signaling, built-in self-test (BIST), and configurable FIFOs.

File format: PDF Size:452 KB

TEXAS INSTRUMENTS CD54/74FCT240 CD54/74FCT240AT CD54/74FCT241 CD54/74FCT244 CD54/74FCT244AT Manual

The data sheet provides the features of CD54/74FCT240, 240AT, 241, 244 and 244AT three-state eight-way buffers/line drivers, including inputs, outputs, power supply, package, compatibility, etc.

File format: PDF Size:19 KB

TEXAS INSTRUMENTS THS8134 THS8134A THS8134B Manual

The THS8134 is a general-purpose triple high-speed D/A converter (DAC) optimized for use in video/graphics applications. The device operates from a 5-V analog supply and a 3-V to 5-V range digital supply. The THS8134 has a sampling rate up to 80 MSPS. The device consists of three 8-bit D/A converters and additional circuitry for bi-level/tri-level sync and blanking level generation in video applications. THS8134 is also well-suited in applications where multiple well-matched and synchronously operating DACs are needed; for example, I-Q modulation and direct-digital synthesis in communications equipment.

File format: PDF Size:346 KB

TEXAS INSTRUMENTS TPS6735 Manual

The TPS6735 is a fixed negative 5-V output inverting dc/dc converter capable of delivering 200 mA from inputs as low as 4.5 V.

File format: PDF Size:330 KB

TEXAS INSTRUMENTS TPA6111A2 Manual

The TPA6111A2 is a stereo audio power amplifier packaged in either an 8-pin SOIC or an 8-pin PowerPAD™ MSOP package capable of delivering 150 mW of continuous RMS power per channel into 16-Ω loads.

File format: PDF Size:872 KB

TEXAS INSTRUMENTS TLC5923 Manual

This document describes the features, applications, and functions of RHB DAP www.ti.com. It is a 16-channel constant-current sink LED driver suitable for monocolor, multicolor, and full-color LED displays, LED signboards, and LED backlighting applications. It features high drive capability, high constant current accuracy, and fast switching output.

File format: PDF Size:432 KB

TEXAS INSTRUMENTS TPA6120A2 Manual

The TPA6120A2 is a high fidelity audio amplifier built on a current-feedback architecture. This high bandwidth, extremely low noise device is ideal for high performance equipment. Its better than 120 dB of dynamic range exceeds the capabilities of the human ear, ensuring that nothing audible is lost due to the amplifier. The solid design and performance of the TPA6120A2 ensures that music, not the amplifier, is heard.

File format: PDF Size:744 KB

TEXAS INSTRUMENTS TPA122 Manual

The TPA122 is a stereo audio power amplifier capable of delivering 150mW of continuous RMS power per channel. It features PC power supply compatibility, internal midrail generation, thermal protection, and short-circuit protection.

File format: PDF Size:456 KB

TEXAS INSTRUMENTS TPA6203A1 Manual

The document describes TPA6203A1, a 1.25W mono fully differential audio power amplifier. It is designed for wireless or cellular handsets and PDAs, and features low power consumption, shutdown control, and improved RF rectification immunity.

File format: PDF Size:1554 KB

TEXAS INSTRUMENTS TPS60231 Manual

The TPS60231 is a white LED charge pump current source with PWM brightness control, which provides a constant current for each LED and the initial value can be set by an external resistor. The operating input voltage range is 2.7V to 6.5V and it is ideal for all applications powered by a single LI-Ion battery cell or three to four NiCd, NiMH, or alkaline battery cells.

File format: PDF Size:617 KB

TEXAS INSTRUMENTS TPA3001D1 Manual

The document describes the features and characteristics of the TPA3001D1 20W mono class-D audio power amplifier. It features high efficiency, short circuit protection, third-generation modulation technique, and low supply current.

File format: PDF Size:794 KB

TEXAS INSTRUMENTS TPA0253 Manual

TPA0253 is a 1-W mono bridge-tied-load (BTL) amplifier designed to drive speakers with as low as 8-Ω impedance. The mono signal is created by summing left and right inputs internally. The amplifier can be reconfigured on the fly to drive two stereo single-ended (SE) signals into headphones. This makes the device ideal for use in small notebook computers, PDAs, digital personal audio players, anyplace a mono speaker and stereo headphones are required.

File format: PDF Size:1005 KB

TEXAS INSTRUMENTS PC Card Controllers PCI1510 GGU/GVF PGE/ZGU/ZVF Manual

This document describes the features and characteristics of the PCI1510 GGU/GVF PGE/ZGU/ZVF PC Card Controllers, including support for multiple package forms, high-speed throughput, compatibility with various interfaces, and programmable output selection.

File format: PDF Size:180 KB

TEXAS INSTRUMENTS SN75971B SCSI DIFFERENTIAL CONVERTER-DATA handbook

This document introduces the data sheet of SN75971B SCSI differential converter-data

File format: PDF Size:200 KB

TEXAS INSTRUMENTS TSB12C01A Data Manual

This document is the Texas Instruments TSB12C01A Data Manual, which introduces the IEEE 1394-1995 High-Speed Serial-Bus Link-Layer Controller SLLS219B

File format: PDF Size:271 KB

TEXAS INSTRUMENTS TL3016 TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS handbook

TL3016 is an ultrafast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ±5-V supplies. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal. The TL3016 only requires 10.6 mA (typical) to achieve a propagation delay of 7.6 ns. The TL3016 is a pin-for-pin functional replacement for the LT1016 comparator, offering higher speed operation but consuming half the power.

File format: PDF Size:200 KB

TEXAS INSTRUMENTS TPS6755 ADJUSTABLE INVERTING DC/DC CONVERTER Manual

TPS6755 is an adjustable inverting dc/dc converter capable of operating from inputs as low as 2.7 V.

File format: PDF Size:266 KB

Brands



Products