intersil Manuals (Others)

The HMP8154 and HMP8156A are NTSC and PAL encoders that are used to convert digital image data into high-quality NTSC and PAL video

File format: PDF Size:484 KB

The HMP8117 is a high quality NTSC and PAL video decoder with internal A/D converters. It is compatible with NTSC M, PAL B, D, G, H, I, M, N, and combination N (NC) video standards. Both composite and S-video (Y/C) input formats are supported. A 2-line comb filter plus a user-selectable chrominance trap filter provide high quality Y/C separation. User adjustments include brightness, contrast, saturation, hue, and sharpness. Vertical blanking interval (VBI) data, such as Closed Captioning, Wide Screen Signalling and Teletext, may be captured and output as BT.656 ancillary data. Closed Captioning and Wide Screen Signalling information may also be read out via the I2C interface. The Videolyzer™ feature provides approved Macrovision™ copy-protection bypass and detection.

File format: PDF Size:483 KB

The ISL5314 is a complete Direct Digital Synthesizer (DDS) system, integrating a 48-bit programmable Carrier NCO and a high-speed 14-bit DAC. It supports parallel processor interface and asynchronous serial interface, with modulation control and frequency control capabilities.

File format: PDF Size:265 KB

The ISL5217 Quad Programmable UpConverter (QPUC) is a QASK/FM modulator/FDM upconverter designed for high dynamic range applications such as cellular basestations. It combines shaping and interpolation filters, a complex modulator, and timing and carrier NCOs into a single package. Each QPUC can create four FDM channels, and multiple QPUCs can be cascaded digitally to provide for up to 16 FDM channels in multi-channel applications. The ISL5217 supports both vector and FM modulation, with multiple modulation modes and filtering options.

File format: PDF Size:623 KB

The Intersil HSP45116A is a high-performance quadrature numerically controlled oscillator/modulator that combines a complex NCO and a high-speed 16-bit complex multiplier/accumulator. It allows for multiplication and modulation of complex vectors. The product features a 32-bit phase resolution and a frequency resolution better than 0.013Hz at 52MHz. The complex sinusoid output has a spurious free dynamic range greater than 90dBc.

File format: PDF Size:558 KB

The Intersil HSP45102 is a Numerically Controlled Oscillator (NCO12) with 32-bit frequency resolution and 12-bit output. With over 69dB of spurious free dynamic range and worst case frequency resolution of 0.009Hz, the NCO12 provides significant accuracy for frequency synthesis solutions at a competitive price.

File format: PDF Size:177 KB

The HSP9501 is a 10-bit wide programmable data buffer designed by Intersil and is used in high speed digital systems. The buffer can be selected to operate in two different modes: delay mode and data recirculate mode. In the delay mode, a programmable data pipeline is created which can provide 2 to 1281 clock cycles of delay between the input and output data. In the data recirculate mode, the output data path is internally routed back to the input to provide a programmable circular buffer. The length of the buffer or amount of delay is programmed through the use of the 11-bit Length Control Input Port (LC0-10) and the Length Control Enable (LCEN). An 11-bit value is applied to the LC0-10 inputs, LCEN is asserted, and the next selected clock edge loads the new count value into the Length Control Register. The delay path of the HSP9501 consists of two registers with a programmable delay RAM between them, therefore, the value programmed into the Length Control Register is the desired length - 2. The range of values which can be programmed into the Length Control Register are from 0 to 1279.

File format: PDF Size:368 KB

The HSP50415 Wideband Programmable Modulator (WPM) is a quadrature amplitude modulator/upconverter designed for wideband digital modulation. The WPM combines shaping and interpolation filters, a complex modulator, timing and carrier NCOs and dual DACs into a single package. The HSP50415 supports vector modulation, accepting up to 16-bit In phase (I) and Quadrature (Q) samples to generate virtually any quadrature AM or PM modulation format. A constellation mapper and 24 Symbol span interpolation shaping filter is provided for the input baseband signals. Gain adjustment is provided after the shaping FIR filter. A timing error generator in the input section allows the on-chip timing NCO to track the input timing. The WPM includes a Numerically Controlled Oscillator (NCO) driven interpolation filter, which allows the input and output sample rate to have a non-integer or variable relationship. This re-sampling feature simplifies use of sample rates that do not have harmonic or integer frequency relationships to the input data rate and decouples the carrier from the DATACLK. A complex quadrature modulator modulates the baseband data on a programmable carrier center frequency. The WPM offers digital output spurious Free Dynamic Range (SFDR) that exceeds 70dB at the maximum output sample rate of 100MSPS, for input sample rates as high as 25MSPS. X/SIN(X) rolloff compensation filtering is provided. Real 14-bit digital output.

File format: PDF Size:841 KB

The ISL5239 Pre-Distortion Linearizer (PDL) is a full featured component for Power Amplifier (PA) linearization to improve PA power efficiency and reduce PA cost.

File format: PDF Size:509 KB

The ISL5416 is a four-channel wideband programmable digital downconverter designed for high dynamic range applications such as cellular basestations where the processing of multiple channels is required in a small physical space.

File format: PDF Size:1678 KB

The ISL5216 is a quad programmable digital downconverter designed for high dynamic range applications such as cellular basestations where multiple channel processing is required in a small physical space.

File format: PDF Size:762 KB

File format: PDF Size:0 KB

The HSP50214B Programmable Downconverter converts digitized IF data into filtered baseband data which can be processed by a standard DSP microprocessor. It performs down conversion, decimation, narrowband low pass filtering, gain scaling, resampling, and Cartesian to Polar coordinate conversion.

File format: PDF Size:1790 KB

The HSP50016 is a high performance digital down converter that performs down conversion, filtering and decimation on sampled data streams of up to 16 bits in width and up to a 75 MSPS data rate.

File format: PDF Size:200 KB

The HSP43220 Decimating Digital Filter is a linear phase low pass decimation filter which is optimized for filtering narrow band signals in a broad spectrum of a signal processing applications. The HSP43220 offers a single chip solution to signal processing applications which have historically required several boards of ICs. This reduction in component count results in faster development times as well as reduction of hardware costs. The HSP43220 is implemented as a two stage filter structure. As seen in the block diagram, the first stage is a high order decimation filter (HDF) which utilizes an efficient sample rate reduction technique to obtain decimation up to 1024 through a coarse low-pass filtering process. The HDF provides up to 96dB aliasing rejection in the signal pass band. The second stage consists of a finite impulse response (FIR) decimation filter structured as a transversal FIR filter with up to 512 symmetric taps which can implement filters with sharp transition regions. The FIR can perform further decimation by up to 16 if required while preserving the 96dB aliasing attenuation obtained by the HDF. The combined total decimation capability is 16,384. The HSP43220 accepts 16-bit parallel data in 2’s complement format at sampling rates up to 33MSPS. It provides a 16-bit microprocessor compatible interface to simplify the task of programming and three-state outputs to allow the connection of several ICs to a common bus. The HSP43220 has low power consumption and operates over a wide supply voltage range of 1.8V to 3.3V and does not require an external clock.

File format: PDF Size:779 KB

The HSP43216 Halfband Filter is a halfband filter manufactured by ADI. It can process 16-bit data with a maximum data rate of 52MSPS. When used with an external multiplexer or demultiplexer, the processing throughput of the part can be easily doubled to 104MSPS.

File format: PDF Size:543 KB

This document is the official datasheet for HSP43168 Dual FIR Filter. HSP43168 Dual FIR Filter is a low power fully static design with 8 sample input channels and two independent 8-bit FIR filters. It supports decimation from 1 to 16 and provides on-board storage for 32 sets of coefficients.

File format: PDF Size:725 KB

The Serial I/O Filter is a high performance filter engine that is ideal for off loading the burden of filter processing from a DSP microprocessor. It supports a variety of multistage filter configurations based on a user programmable filter and fixed coefficient halfband filters. These configurations include a programmable FIR filter of up to 256 taps, a cascade of from one to five halfband filters, or a cascade of halfband filters followed by a programmable FIR. The half band filters each decimate by a factor of two, and the FIR filter decimates from one to eight. When all six filters are selected, a maximum decimation of 256 is provided. For digital tuning applications, a separate multiplier is provided which allows the incoming data stream to be multiplied, or mixed, by a user supplied mix factor. A two pin interface is provided for serially loading the mix factor from an external source or selecting the mix factor from an on-board ROM. The on-board ROM contains samples of a sinusoid capable of spectrally shifting the input data by one quarter of the sample rate, FS/4. This allows the chip to function as a digital down converter when the filter stages are configured as a low-pass filter. The serial interface for 3- input and output data is compatible with the serial ports of common DSP microprocessors. Coefficients and configuration data are loaded over a bidirectional eight bit interface.

File format: PDF Size:474 KB

This document introduces the Intersil HSP50210 Digital Costas Loop, which can be used to demodulate BPSK, QPSK, 8-PSK, OQPSK, FSK, AM and FM waveforms.

File format: PDF Size:682 KB

This is the technical manual of HSP50110 Digital Quadrature Tuner. The tuner provides many of the functions required for digital demodulation, including carrier LO generation and mixing, baseband sampling, programmable bandwidth filtering, baseband AGC, and IF AGC error detection. Serial control inputs are provided which can be used to interface with external symbol and carrier tracking loops. These elements make the DQT ideal for demodulator applications with multiple operational modes or data rates. The DQT may be used with HSP50210 Digital Costas Loop to function as a demodulator for BPSK, QPSK, 8-PSK OQPSK, FSK, FM, and AM signals. The DQT processes a real or complex input digitized at rates up to 52 MSPS. The channel of interest is shifted to DC by a complex multiplication with the internal LO. The quadrature LO is generated by a numerically controlled oscillator (NCO) with a tuning resolution of 0.012Hz at a 52MHz sample rate. The output of the complex multiplier is gain corrected and fed into identical low pass FIR filters. Each filter is comprised of a decimating low pass filter followed by an optional compensation filter. The decimating low pass filter is a 3 stage Cascaded-Integrator-Comb (CIC) filter. The CIC filter can be configured as an integrate and dump filter or a third order CIC filter with a (sin(X)/X)3 response. Compensation filters are provided to flatten the (sin(X)/X)N response of the CIC. If none of the filtering options are desired, then the input is directly fed into the FIR filter.

File format: PDF Size:202 KB