intersil Manuals (Others)

INTERSIL ISL54206A Manual

The ISL54206A is a high-performance USB 2.0 audio switch from Intersil that supports low-distortion audio and high-precision USB 2.0 high-speed data (480Mbps) signal switching, which can be used in MP3 players and other portable devices.

File format: PDF Size:1369 KB

INTERSIL ICL7135 handbook

File format: PDF Size:0 KB

INTERSIL HIN202E HIN206E HIN207E HIN208E HIN211E HIN213E HIN232E handbook

The HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E family of RS-232 transmitters/receivers interface circuits meet all ElA high-speed RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. They are protected to ±15kV ESD and require a single +5V power supply. The devices offer a wide variety of high-speed RS-232 transmitter/receiver combinations to accommodate various applications.

File format: PDF Size:640 KB

INTERSIL ISL88011 ISL88012 ISL88013 ISL88014 ISL88015 handbook

The ISL88011 through ISL88015 family of devices offer both fixed and/or adjustable voltage-monitoring that combine popular functions such as Power On Reset control, Watchdog Timer, Supply Voltage Supervision, and Manual Reset assertion in a small 5 Ld SOT-23 package.

File format: PDF Size:225 KB

INTERSIL ISL28286/ISL28486 Dual Micropower Single Supply Rail-to-Rail Input Output (RRIO) Precision Op-Amp handbook

The ISL28286 and ISL28486 are Dual and Quad channel micropower precision operational amplifiers optimized for single supply operation at 5V down to 2.4V.

File format: PDF Size:517 KB

INTERSIL ISL9204 High Input Voltage Charger handbook

ISL9204 is a high input voltage single-cell Li-ion battery charger from Intersil. This charger can accept up to 28V input voltage, but is disabled when the input voltage exceeds the OVP threshold (minimum 10V) to prevent excessive power dissipation. The 28V rating eliminates the overvoltage protection circuit required in a low input voltage charger. The charge current and the end-of-charge (EOC) current are programmable with external resistors. When the battery voltage is lower than a typical value of 2.8V, the charger preconditions the battery with typically 17% of the programmed charge current. When the charge current reduces to the programmable EOC current level during the CV charge phase, an EOC indication is provided by the CHG pin, which is an open-drain output. An internal thermal foldback function protects the charger from any thermal failure. Two indication pins (PPR and CHG) allow simple interface to a microprocessor or LEDs. When no adapter is attached or when disabled, the charger will enter a low power mode until a battery is connected or the charger is enabled.

File format: PDF Size:262 KB

INTERSIL 82C59A Manual

The Intersil 82C59A is a high performance CMOS Priority Interrupt Controller manufactured using an advanced 2µm CMOS process. The 82C59A is designed to relieve the system CPU from the task of polling in a multilevel priority system. The high speed and industry standard configuration of the 82C59A make it compatible with microprocessors such as 80C286, 80286, 80C86/88, 8086/88, 8080/85 and NSC800. The 82C59A can handle up to eight vectored priority interrupting sources and is cascadable to 64 without additional circuitry. Individual interrupting sources can be masked or prioritized to allow custom system configuration. Two modes of operation make the 82C59A compatible with both 8080/85 and 80C86/88/286 formats. Static CMOS circuit design ensures low operating power. The Intersil advanced CMOS process results in performance equal to or greater than existing equivalent products at a fraction of the power.

File format: PDF Size:413 KB

INTERSIL ISL22349 Manual

The ISL22349 integrates four digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit. It features low noise, low power, I2C bus interface, etc.

File format: PDF Size:333 KB

INTERSIL ISL22414 Single Digitally Controlled Potentiometer handbook

The ISL22414 is a single channel digitally controlled potentiometer (DCP) produced by Intersil. It supports SPI bus communication and has 256 positions and a 2.5V~5.5V power supply.

File format: PDF Size:646 KB

INTERSIL EL7536 Monolithic 1A Step-Down Regulator handbook

EL7536 is a synchronous, integrated FET 1A step-down regulator with internal compensation. It operates with an input voltage range from 2.5V to 5.5V, which accommodates supplies of 3.3V, 5V, or a Li-Ion battery source. The output can be externally set from 0.8V to VIN with a resistive divider. The EL7536 features PWM mode control. The operating frequency is typically 1.4MHz. Additional features include a 100ms Power-On-Reset output, <1µA shut-down current, short-circuit protection, and over-temperature protection. The EL7536 is available in the 10 Ld MSOP package, making the entire converter occupy less than 0.15in2 of PCB area with components on one side only. Both packages are specified for operation over the full -40°C to +85°C temperature range.

File format: PDF Size:187 KB

INTERSIL EL4583 handbook

EL4583 is a video sync separator produced by Intersil, which can extract timing from video sync in NTSC, PAL, and SECAM systems and non-standard formats, or from computer graphics operating at higher scan rates. It also has timing adjustment, default vertical output, composite sync, vertical sync, filter, burst/back porch, horizontal, no signal detect, level and odd/even output (only in interlaced scan formats).

File format: PDF Size:179 KB

INTERSIL ICM7211AM 4-Digit LCD Display Driver handbook

ICM7211AM 4-Digit, LCD Display Driver

File format: PDF Size:205 KB

INTERSIL ISL54003 ISL54005 ISL54006 Integrated Audio Amplifier Systems handbook

ISL54003, ISL54005, ISL54006 are integrated audio power amplifier systems from Intersil, which combine a mono BTL amplifier and stereo headphone amplifiers in a single device. The devices are designed to operate from a single +2.7V to +5V power supply and can drive 8Ω mono speaker and 16Ω or 32Ω headphone speakers.

File format: PDF Size:305 KB

INTERSIL EL2126 Ultra-Low Noise Low Power Wideband Amplifier handbook

EL2126 is an ultra-low noise, wideband amplifier that runs on half the supply current of competitive parts.

File format: PDF Size:346 KB

INTERSIL ISL22426 Dual Digitally Controlled Potentiometer (XDCP) Manual

The ISL22426 integrates two digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit. It features low noise, low power, SPI bus interface, and can be used in a wide range of applications including control, parameter adjustments, and signal processing.

File format: PDF Size:469 KB

INTERSIL HA4314B Manual

The HA4314B is a very wide bandwidth 4x1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high performance applications. The circuit features very low power dissipation (105mW Enabled, 4mW Disabled), excellent differential gain and phase, and very high off isolation. When disabled, the output is switched to a high impedance state, making the HA4314B ideal for routing matrix equipment. The HA4314B requires no external current source, and features fast switching and symmetric slew rates. For a 4x1 crosspoint with Tally outputs (channel indicators) or with synchronous control signals, please refer to the HA4404B and HA4344B data sheets, respectively. For audio channels requiring larger signal swings, please refer to the CD22M3494 (16x8) data sheet.

File format: PDF Size:321 KB

INTERSIL ISL1539 Manual

The ISL1539 is a dual channel differential VDSL2 line driver used for high performance long reach and high-speed applications. The driver has been optimized for flat gain response, reduced harmonic distortion, and noise to improve the overall signal to noise ratio in the system. The drivers achieve a total harmonic distortion (THD) measurement of typically -60dB MTPR @ 1.1MHz, while consuming typically 10mA per DSL channel of total supply current. The device operates on ±5V to ±15V supplies and retains its bandwidth and linearity over the complete supply range. It is supplied in a small footprint (4mmx5mm) 24 Ld QFN package and is specified for operation over the full -40°C to +85°C temperature range.

File format: PDF Size:461 KB

INTERSIL CA124/CA224/CA324/LM324/LM2902 handbook

CA124, CA224, CA324, LM324, LM2902 are four independent high-gain operational amplifiers suitable for commercial, industrial, and military applications. They can be powered by single or dual supplies, and have low power consumption and a wide input common-mode voltage range.

File format: PDF Size:137 KB

intersil CA158 CA158A CA258 CA358 CA358A CA2904 LM358 LM2904 Manual

CA158, CA158A, CA258, CA358, CA358A, CA2904, LM358, LM2904 are dual, 1MHz, operational amplifiers for commercial industrial, and military applications from the brand DINGHAO. They are designed specifically to operate from a single power supply over a wide range of voltages. They may also be operated from split power supplies.

File format: PDF Size:103 KB

intersil HIP6601B HIP6603B HIP6604B Manual

The HIP6601B, HIP6603B and HIP6604B are high- frequency, dual MOSFET drivers specifically designed to drive two power N-Channel MOSFETs in a synchronous rectified buck converter topology.

File format: PDF Size:324 KB

Brands



Products