intersil Manuals (Others)

intersil EL7202 EL7212 EL7222 Manual

The EL7202, EL7212, EL7222 ICs are matched dual-drivers that improve the operation of the industry standard DS0026 clock drivers. The Elantec versions are very high speed drivers capable of delivering peak currents of 2.0 amps into highly capacitive loads. The high speed performance is achieved by means of a proprietary “Turbo-Driver” circuit that speeds up input stages by tapping the wider voltage swing at the output. Improved speed and drive capability are enhanced by matched rise and fall delay times. These matched delays maintain the integrity of input-to-output pulse-widths to reduce timing errors and clock skew problems. This improved performance is accompanied by a 10 fold reduction in supply currents over bipolar drivers, yet without the delay time problems commonly associated with CMOS devices. Dynamic switching losses are minimized with non-overlapped drive techniques.

File format: PDF Size:197 KB

intersil EL7232 Manual

EL7232 is a 3-state output dual channel, high speed, high current line driver produced by Philips. It is suitable for ATE and microprocessor-based applications. The low static power consumption makes it attractive in battery applications. The 2A peak drive capability makes it an excellent choice when driving high speed capacitive lines as well. The input circuitry provides level shifting from TTL levels to the supply rails. The EL7232 is available in 8 Ld PDIP and 8 Ld SO packages.

File format: PDF Size:217 KB

intersil EL7242 EL7252 Manual

The EL7242/EL7252 dual input, 2-channel drivers achieve the same excellent switching performance of the EL7212 family while providing added flexibility. The 2-input logic and configuration is applicable to numerous power MOSFET drive circuits. As with other Elantec drivers, the EL7242/EL7252 are excellent for driving large capacitive loads with minimal delay and switching times. “Shoot-thru” protection and latching circuits can be implemented by simply “cross-coupling” the 2-channels.

File format: PDF Size:187 KB

intersil ISL6801 Manual

ISL6801 is a high voltage bootstrap high side driver produced by Intersil. It has two independent output pins that can independently control the rise and fall times.

File format: PDF Size:95 KB

intersil HIP4020 Manual

The HIP4020 is a half amp full bridge power driver for small 3V, 5V and 12V DC motors. This device has 4-quadrant load control function, which can change the direction of current flow by controlling the voltage between OUTA and OUTB terminals.

File format: PDF Size:253 KB

intersil EL7515 Manual

The EL7515 is a high frequency high efficiency step-up DC/DC regulator operated at fixed frequency PWM mode, it can deliver up to 600mA output current at up to 92% efficiency. It is suitable for applications such as 3V to 5V and 12V converters, 5V to 12V converters, TFT-LCD, DSL, portable equipment and desktop equipment.

File format: PDF Size:180 KB

intersil ISL97516 Manual

ISL97516 is a high frequency, high efficiency step-up voltage regulator operated at constant frequency PWM mode from ISL.

File format: PDF Size:299 KB

intersil ISL97519 Manual

The ISL97519 is a high frequency, high efficiency step-up voltage regulator operated at constant frequency PWM mode. With an internal 2.0A, 200mΩ MOSFET, it can deliver up to 1A output current at over 90% efficiency. The selectable 600kHz and 1.2MHz allows smaller inductors and faster transient response. An external compensation pin gives the user greater flexibility in setting frequency compensation allowing the use of low ESR ceramic output capacitors. When shut down, it draws <1µA of current and can operate down to 2.3V input supply. These features along with 1.2MHz switching frequency makes it an ideal device for portable equipment and TFT-LCD displays. The ISL97519 is available in an 8 Ld MSOP package with a maximum height of 1.1mm. The device is specified for operation over the full -40°C to +105°C temperature range.

File format: PDF Size:328 KB

intersil ISL97519A Manual

The ISL97519A is a high frequency, high efficiency step-up voltage regulator operated at constant frequency PWM mode.

File format: PDF Size:369 KB

intersil ISL97656 Manual

The ISL97656 is a high frequency, high efficiency step-up voltage regulator operated at constant frequency PWM mode. With an internal 4.0A, 120mΩ MOSFET, it can deliver up to 2A output current at over 90% efficiency. The selectable 640kHz and 1.2MHz allows smaller inductors and faster transient response. An external compensation pin gives the user greater flexibility in setting frequency compensation allowing the use of low ESR Ceramic output capacitors. When shut down, it draws <1µA of current and can operate down to 2.3V input supply. These features along with 1.2MHz switching frequency makes it an ideal device for portable equipment and TFT-LCD displays. The ISL97656 is available in a 10 Ld TDFN package with a maximum height of 1.1mm. The device is specified for operation over the full -40°C to +85°C temperature range.

File format: PDF Size:322 KB

intersil ISL98012 Manual

ISL98012 is a high frequency, high efficiency step-up DC/DC regulator operated in fixed frequency PWM mode. With an integrated 1.4A MOSFET, it can deliver up to 600mA output current at up to 92% efficiency. The adjustable switching frequency is up to 750kHz, making it ideal for common boost applications. When shut down, it draws <1µA of current. This feature, along with the minimum starting voltage of 1.8V, makes it suitable for portable equipment powered by 1 Lithium Ion, 3 to 4 NiMH cells, or 2 cells of alkaline battery. The ISL98012 is available in a 10 Ld MSOP package, with a maximum height of 1.1mm. With proper external components, the whole converter takes less than 0.25in2 PCB space. This device is specified for operation over the full -40°C to +85°C temperature range.

File format: PDF Size:474 KB

intersil ISL97701 Manual

File format: PDF Size:0 KB

intersil EL7630 Manual

The EL7630 is a high efficiency, constant frequency PWM regulator for use in white LED driving applications. With efficiencies up to 86%, the EL7630 operates at 1.35MHz switching frequency while operating from an input voltage of between 2.7V and 5.5V. The maximum output voltage of 27V enables the EL7630 to drive up to 6 LEDs in series. It is also possible to use the EL7630 to drive LEDs in series/parallel combination for applications requiring up to 15 LEDs. Available in the 6 Ld SC-70 and the 5 Ld TSOT packages, the EL7630 features the same pinout as competitive products but offers higher efficiency, constant frequency operation. It is specified for operation over the -40°C to +85°C ambient temperature range.

File format: PDF Size:213 KB

intersil ISL88694 Manual

The ISL88694 SMBus accelerator (SMA) is a dual active pull-up bus terminator designed to improve data transmission speed on SMBus or similar 2-wire serial bus interfaces. The ISL88694 is also compatible to the I2C serial bus.

File format: PDF Size:239 KB

intersil HIP6501A handbook

The HIP6501A is a triple linear power controller with an ACPI control interface. It integrates two linear controllers and a low-current pass transistor, as well as monitoring and control functions. It simplifies the implementation of ACPI-compliant designs in microprocessor and computer applications.

File format: PDF Size:306 KB

intersil HIP6503 handbook

The HIP6503 is a multiple linear power controller with an ACPI control interface. It complements either an HIP6020 or an HIP6021 in ACPI-compliant designs for microprocessor and computer applications. The IC integrates four linear controllers/regulators, switching, monitoring and control functions into a 20 pin SOIC package.

File format: PDF Size:352 KB

intersil ISL6504/ISL6504A handbook

The ISL6504 and ISL6504A complement other power building blocks (voltage regulators) in ACPI-compliant designs for microprocessor and computer applications.

File format: PDF Size:396 KB

intersil ISL6505 handbook

ISL6505 is a multiple linear power controller with ACPI control interface. The ISL6505 integrates three linear controllers/regulators, switching, monitoring and control functions into a 20-pin wide-body SOIC or 20-pin QFN (also known as MLF) 5x5 package.

File format: PDF Size:381 KB

intersil ISL6506/ISL6506A/ISL6506B handbook

ISL6506 is a complement to other power building blocks (voltage regulators) in ACPI-compliant designs for microprocessor and computer applications. The IC integrates the control of the 5VDUAL and 3.3VDUAL rails into an 8 Ld EPAD SOIC package. The ISL6506 operating mode (active outputs or sleep outputs) is selectable through two digital control pins; S3 and S5.

File format: PDF Size:159 KB

intersil ISL6416 handbook

ISL6416 is a triple output low-noise LDO regulator with an integrated microprocessor reset circuit and is optimized for powering wireless chipsets. The IC accepts an input voltage range of 3.0V to 3.6V and provides three regulated output voltages: 1.8V (LDO1), 2.8V (LDO2), and another ultra-clean 2.8V (LDO3). On chip logic provides sequencing between LDO1 and LDO2 for the BBP/MAC and the I/O supply voltage outputs. LDO3 features ultra low noise that does not exceed 30µVRMS (typical) to aid VCO stability. High integration makes the ISL6416 an ideal choice to power many of today’s small form factor industry standard wireless cards such as PCMCIA, mini-PCI and Cardbus-32. The ISL6416 uses an internal PMOS transistor as the pass device. The ISL6416 also integrates a reset function, which eliminates the need for the additional reset IC required in WLAN applications. The IC asserts a RESET signal whenever the VIN supply voltage drops below a preset threshold, keeping it asserted for at least 25ms after Vin has risen above the reset threshold. FAULT indicates the loss of regulation on LDO1.

File format: PDF Size:159 KB

Brands



Products