ST Manuals

The TSH95 is a low-power, high-frequency quad operational amplifier designed for high-quality video processing with 4.5 mA supply current and 150 MHz bandwidth.

File format: PDF Size:371 KB

The TSH24 is a quad bipolar operational amplifier offering a single supply operation from 3V to 30V with very good performances: medium speed (25MHz), unity gain stability and low noise. The TSH24 is therefore an enhanced replacement of standard dual operational amplifiers.

File format: PDF Size:542 KB

The TS914 is a rail-to-rail CMOS quad operational amplifier designed to operate with a single or dual supply voltage. It has rail-to-rail input and output voltage ranges, extremely low input bias current of 1 pA (typical), low input offset voltage of 5 mV (maximum, A grade), and is specified for 600 Ω and 100 Ω loads. The supply current is low at 200 μA/amp (VCC = 3V). It also features latch-up immunity.

File format: PDF Size:198 KB

The TSH22 is a dual bipolar operational amplifier offering single supply operation, medium speed, and low noise.

File format: PDF Size:543 KB

The MC33079 is a monolithic quad operational amplifier particularly well suited for audio applications. It offers low voltage noise (4.5 nV/√Hz) and high frequency performance (15 MHz gain bandwidth product, 7 V/µs slew rate). In addition the MC33079 has a very low distortion (0.002%) and excellent phase/gain margins. The output stage allows a large output voltage swing and symmetrical source and sink currents.

File format: PDF Size:145 KB

The LS204 is a high performance dual operational amplifier with features including low power consumption, short-circuit protection, low distortion, low noise, high gain-bandwidth product, and high channel separation. It has internal frequency and phase compensation circuits, allowing stable operation as a voltage follower. The circuit maintains stable electrical characteristics across the entire supply voltage range and is particularly suitable for professional and telecom applications such as active filtering.

File format: PDF Size:321 KB

TS393 is a low-power dual CMOS voltage comparator from ST Microelectronics. It features an extremely low supply current of only 9µA, making it ideal for battery-powered applications. The device also has extremely low input bias current and input offset current, an input common-mode voltage range that includes ground, and a high input impedance of 1012Ω. Its response time is also fast, at only 2.5µs. The TS393 is pin-to-pin and functionally compatible with the dual bipolar LM393.

File format: PDF Size:150 KB

The TS374 is a low power voltage comparator manufactured by STMicroelectronics. It features single or dual power supply, low input bias current, low input offset voltage, high input impedance and fast response time. It is suitable for low power applications.

File format: PDF Size:87 KB

TS372 is a low power dual CMOS voltage comparator with a wide single or dual supply range, very low supply current, extremely low input bias current and offset currents, low input offset voltage, and low output saturation voltage. It is suitable for battery powered electronics, general-purpose portable devices, and low voltage applications.

File format: PDF Size:125 KB

The TS3704 is a micropower CMOS quad voltage comparator with extremely low consumption of 9μA typ / comparator (20 times less than bipolar LM339). The push-pull CMOS output stage allows power and space saving by eliminating the external pull-up resistor required by usual open- collector output comparators. Thus response times remain similar to the LM339.

File format: PDF Size:134 KB

TS3702 is a micropower CMOS dual voltage comparator with extremely low consumption of 9μA typ / comparator (20 times less than bipolar LM393). The push-pull CMOS output stage allows power and space saving by eliminating the external pull-up resistor required by usual open- collector output comparators. Thus response times remain similar to the LM393.

File format: PDF Size:116 KB

The TS339 is a micropower CMOS quad voltage comparator with extremely low power consumption, low input bias current, wide supply range, high input impedance, and fast response time.

File format: PDF Size:129 KB

TS27L2 is a low power dual operational amplifier produced by ST. It can be powered by single or dual supplies. It uses the ST silicon gate CMOS process and has an excellent consumption-speed ratio. It is ideally suited for low consumption applications. The input impedance is very high and the input current is extremely low. The output voltage can swing to ground. It has excellent phase margin and stable and low offset voltage.

File format: PDF Size:201 KB

LS404 is a high performance quad operational amplifier with single/split supply operation, low power consumption, short circuit protection, low distortion, low noise, high gain-bandwidth product and high channel separation.

File format: PDF Size:261 KB

The LM101A is a general purpose operational amplifier that offers features such as low current drain, input and output overload protection, no latch-up when the common-mode range is exceeded, no oscillations, and compensation with a single 30pF capacitor.

File format: PDF Size:226 KB

The TSH94 is a high-performance low-power quad operational amplifier with standby function. It features low power consumption, high speed, low noise, etc., and is suitable for high-quality video signal processing and high-quality audio applications.

File format: PDF Size:536 KB

LM2904, LM2904A low-power dual operational amplifier is an internally frequency-compensated operational amplifier designed specifically for automotive and industrial control systems. It has a large input common-mode range, large output voltage swing, and low supply current.

File format: PDF Size:597 KB

LM2903 is a low-power dual voltage comparator produced by ST company. It features a wide supply voltage range, low input bias current, low output saturation voltage, and TTL, DTL, ECL, MOS, and CMOS compatible outputs.

File format: PDF Size:751 KB

File format: PDF Size:0 KB

The LM2901 is a low-power quad voltage comparator with a wide voltage range, low operating current, and low output saturation voltage.

File format: PDF Size:682 KB