ST Manuals

TS7221 is a single BiCMOS device with rail-to-rail inputs and open drain output. It operates from 2.7 to 10 V and has a typical supply current of 6 µA at 5 V. The response time is 0.5 µs at 5 V. It has low input current and ESD protection of 2 kV. It is suitable for battery-powered systems, notebooks and PDAs, PCMCIA cards, cellular and mobile communications, alarms and security systems, and can be used as a replacement for amplifiers in comparator configurations for improved performance.

File format: PDF Size:192 KB

TS616 is a dual op amp from TI with high output current and low noise, suitable for xDSL applications.

File format: PDF Size:1162 KB

LM158W-LM258W-LM358W low power dual operational amplifiers are specially designed for single power supply operation. It features high gain, low input current, low noise and wide bandwidth.

File format: PDF Size:360 KB

The TS7211 is a micropower comparator featuring rail to rail input performance in a tiny SOT23-5 package. This comparator is ideally suited to space and weight critical applications. It is fully specified at 2.7V, 5V and 10V operations over the industrial temperature range (-40/+85°C).

File format: PDF Size:92 KB

TSH110-TSH111-TSH112-TSH113-TSH114 are a series of wide band low noise operational amplifiers with a very high slew rate and a large bandwidth, only 3.2mA quiescent supply current. This series of products is suitable for high-end video drivers, xDSL receivers and A/D converter drivers that require large bandwidths and multiple carriers.

File format: PDF Size:175 KB

The TSH70,71,72,73,74,75 is a low power, wideband, single-ended output operational amplifier.

File format: PDF Size:602 KB

TS187x series low power operational amplifiers, with 1.8V input/output, Rail-to-Rail, low power characteristics, suitable for battery powered applications, portable communication devices, audio drivers, laptop computers and other applications.

File format: PDF Size:372 KB

The TS185x series is a family of low power, high performance single, dual and quad operational amplifiers, which can operate with supply voltages as low as 1.8 V.

File format: PDF Size:425 KB

The TS94x series is a family of micropower operational amplifiers characterized for 2.5 V to 10 V operation over a -40° C to +85° C temperature range. They exhibit excellent consumption -1.2 µA, while featuring 10 kHz gain bandwidth product, 1.5 mA output capability and output rail-to-rail operation - 2.85 V typical at 3 V with RL=10 kΩ.

File format: PDF Size:314 KB

The TS613 is a dual operational amplifier featuring a high output current, large gain-bandwidth product, and the ability to drive a 25Ω load with a 160mA output current at ±6V power supply. This device is particularly intended for applications where multiple carriers must be amplified simultaneously with very low intermodulation products.

File format: PDF Size:142 KB

TS93x, TS93xA, TS93xB are low power, single supply, rail to rail output operational amplifiers, suitable for battery powered, portable communication systems, alarms, smoke detectors, instrumentation and sensors, PH meters, digital scales, automotive applications

File format: PDF Size:307 KB

TS861, TS862, TS864 are rail-to-rail micropower BiCMOS comparators from Renesas, featuring ultra low current consumption, rail to rail CMOS inputs, push pull outputs, supply operation from 2.7 to 10 V, low propagation delay, 2 kV ESD protection and A class latch-up immunity. It is suitable for battery-powered systems, portable communication systems, smoke/gas/fire detectors, portable computers and more.

File format: PDF Size:343 KB

File format: PDF Size:46 KB

This document describes the features and characteristics of the TS321 low-power single operational amplifier, including large output voltage swing, low supply current, low input bias current, low input offset voltage, etc.

File format: PDF Size:243 KB

This document introduces the features and applications of TS97x series operational amplifiers. The series of operational amplifiers operates with voltages as low as ±1.35 V and features output rail-to-rail signal swing. The TS97x are particularly well suited for portable and battery-supplied equipment. Very low noise and low distortion characteristics make them ideal for audio pre-amplification.

File format: PDF Size:526 KB

The TS461, TS462 and TS464 are a family of operational amplifiers from STMicroelectronics that are designed for use in portable and battery-supplied equipment. They offer excellent output rail-to-rail performances at an attractive cost.

File format: PDF Size:275 KB

TS951, TS952, TS954 are low-power operational amplifiers from ST. They are packaged in SOT23 and feature high conversion rate, low power consumption and wide voltage range. They can be applied to various portable devices.

File format: PDF Size:571 KB

The TS921 is a rail-to-rail single operational amplifier with features including low noise, low distortion, high output current, etc. It is suitable for low voltage audio systems, mobile phones, etc.

File format: PDF Size:374 KB

The UA741 is a monolithic operational amplifier produced by ST. It features a large input voltage range, no latch-up, high gain, short circuit protection, no frequency compensation required, and is pin compatible with the UA709.

File format: PDF Size:148 KB

The TS522 is a monolithic dual operational amplifier mainly dedicated to audio applications. It offers a very low input offset voltage as well as low voltage noise (4.5 nV/√Hz) and high dynamic performances (15 MHz gain bandwidth product, 7 V/μs slew rate).

File format: PDF Size:311 KB