TOREX Manuals

XC9504 series are PWM control, PWM/PFM switching, 2 channel (step-up and inverting) DC/DC controller ICs.

File format: PDF Size:2881 KB

File format: PDF Size:1105 KB

The XC9502 series is a PWM controlled, PWM/PFM automatic switching controlled, multi-functional, 2 channel step-up and down DC/DC controller ICs. It has a standard voltage supply internal of 0.9V, and the output 1 voltage (step-up DC/DC controller) can be set freely within a range of 1.5V to 30V using externally connected components. The output 2 (step-down DC/DC controller) has a built-in 0.9V reference voltage (accuracy ± 2%), and can be set from 0.9V to 6.0V using external components. With a switching frequency of 180kHz, the size of the external components can be reduced. Switching frequencies of 300kHz and 500kHz are also available as custom-designed products. The control of the XC9502 series can be switched between PWM control and PWM/PFM automatic switching control using external signals. When automatic switching is selected, the control switches from PWM to PFM during light loads, and the series is highly efficient from light loads through to large output currents. Noise is easily reduced with PWM control as the frequency is fixed. The series provides freedom of control selection so that control suited to the application can be selected. The soft-start time is internally set to 10msec (Output1) and offers protection against in-rush currents when the power is switched, preventing voltage overshoot.

File format: PDF Size:2325 KB

The XC9501 series are PWM controlled, PWM/PFM automatic switching controlled, multi-functional, dual step-up DC/DC converter controller ICs.

File format: PDF Size:1170 KB

XC9303 series high efficiency synchronous step-up/down DC/DC controller ICs, with high efficiency synchronous rectifier topology, and a built-in 0.9V ±2.0% internal voltage source, which can be freely set output voltage range of 2.0V to 6.0V using external components. The built-in 300kHz switching frequency can be used with smaller external components.

File format: PDF Size:690 KB

The XC9301/XC9302 series are step-up/down DC/DC converter controller ICs with fast, low ON resistance drivers built-in

File format: PDF Size:472 KB

The XCM526 series is a multi-module IC which includes a step-down DC/DC controller IC and P-channel power MOSFET. The IC enables a high efficiency, stable power supply with an output current up to 3A. Low ESR electrolytic capacitors such as an OS-CON aluminum solid capacitor, a tantalum Neo capacitor can be used as an output capacitor. In case of using a ceramic capacitor, RSENSE is needed to be placed on. The XCM526 series has a 0.9V (±1.5%) reference voltage, and using externally connected resistors, the output voltage can be set freely. With an internal switching frequency of 500kHz and 1.0MHz, small external components can also be used. The XCM526A has a fixed PWM control for low output voltage ripple, and the XCM526B has a PWM/PFM control, which automatically switches from PWM to PFM during light loads and high efficiencies can be achieved over a wide range of load conditions. As for the soft-start time, there are two types, one is internally set to 4ms and the other can be externally set-up. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel driver transistor is forced OFF when input voltage becomes 2.3V (TYP.) or lower.

File format: PDF Size:677 KB

The XC9254R series is a group of synchronous-rectification type DC/DC converters with a built-in 0.42ΩP-channel MOS driver transistor and 0.52ΩN-channel MOS switching transistor, designed to allow the use of ceramic capacitors. Operating voltage range is from 2.0V to 6.0V. The XC9254R001 type has a fixed output voltage of 1.2V (accuracy: ±2.0%). The device provides a high efficiency, stable power supply with an output current of 600mA to be configured using only a coil and two capacitors connected externally. With the built-in oscillator, 1.2MHz is fixed internally. As for operation mode, the XC9254R series is automatic PWM/PFM switching control allowing fast response, low ripple and high efficiency over the full range of loads (from light load to heavy load). The soft start and current control functions are internally optimized. During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0μA or less. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel MOS driver transistor is forced OFF when input voltage becomes 1.4V or lower. Two types of package SOT-25 and USP-6C are available

File format: PDF Size:300 KB

The XC9253R series is a group of synchronous-rectification type DC/DC converters with a built-in 0.6ΩP-channel driver transistor and 0.7ΩN-channel switching transistor, designed to allow the use of ceramic capacitors. The ICs enable a high efficiency, stable power supply with an output current of 500mA to be configured using only a coil and two capacitors connected externally. Minimum operating voltage is 2.0V~6.0V. Output voltage is 3.3V(accuracy: ±2.0%). With the built-in oscillator, oscillation frequency is set to 600kHz. As for operation mode, the XC9253R series is automatic PWM/PFM switching control allowing fast response, low ripple and high efficiency.

File format: PDF Size:327 KB

The XC9244/XC9245 series is a group of synchronous-rectification type step-down DC/DC converters with a built-in 0.65Ω P-channel MOS driver transistor and 0.45Ω N-channel MOS switching transistor, designed to allow the use of ceramic capacitors. Output current of 400mA (MAX.) to be configured using only a coil and capacitor connected externally. The output voltage can be set from 0.8V to 4.0V in increments of 0.05V (accuracy: ±2.0%). With an internal switching frequency of 1.2MHz, small external components can be used.

File format: PDF Size:847 KB

XC9242/XC9243 series 2A synchronous step-down DC/DC converters are a group of synchronous-rectification step-down DC/DC converters with a built-in 0.11Ω (TYP.) P-channel MOS driver transistor and 0.12Ω(TYP.) N-channel MOS switching transistor, designed to allow the use of ceramic capacitors. The small size allows for high integration and is suitable for a variety of applications.

File format: PDF Size:822 KB

XC9235/XC9236/XC9237 series is a group of synchronous-rectification type DC/DC converters with a built-in 0.42Ω P-channel MOS driver transistor and 0.52ΩN-channel MOS switching transistor, designed to allow the use of ceramic capacitors.

File format: PDF Size:968 KB

XC9223/XC9224 series are synchronous step-down DC/DC converters with a 0.21Ω (TYP.) P-channel driver transistor and a synchronous 0.23Ω (TYP.) N-channel switching transistor built-in.

File format: PDF Size:380 KB

XC9220/XC9221 series is a group of multi-purpose step-down DC/DC controller ICs with 16V input voltage. These ICs enable a high efficiency, stable power supply with an output current up to 3A to be configured using only a transistor, a coil, a diode, and two capacitors connected externally. Low ESR capacitors such as a ceramic capacitor can be used as an output capacitor. The XC9220/XC9221 series has a 0.9V (±1.5%) reference voltage, and using externally connected resistors, the output voltage can be set freely. With an internal switching frequency of 300kHz and 500kHz 1.0MHz, small external components can also be used. The XC9220 series is PWM control, and the XC9221 series is PWM/PFM mode, which automatically switches from PWM to PFM during light loads and high efficiencies can be achieved over a wide range of load conditions. As for the soft-start time, the XC9220/XC9221A and C series is internally set to 4msec and the XC9220/XC9221B and D series can be externally set-up. With the built-in UVLO (Under Voltage Lock Out) function, the external P-channel driver transistor is forced OFF when input voltage becomes 2.3V or lower.

File format: PDF Size:505 KB

The XC9213 series is an N-ch & N-ch drive, synchronous, step-down DC/DC controller IC with a built-in bootstrap driver circuit. Output will be stable no matter which load capacitors, including low ESR capacitors, are used.

File format: PDF Size:1256 KB

XC6365/XC6366 Series PWM Controlled, PWM/PFM Switchable Step-Down DC/DC Controllers

File format: PDF Size:1412 KB

The XC9135/XC9136 series are synchronous step-up DC/DC converters with a 0.2Ω(TYP.) N-channel driver transistor and a 0.2 Ω(TYP.) synchronous P-channel switching transistor built-in. A highly efficient and stable current can be supplied up to 1.0A by reducing ON resistance of the built-in transistors. The series are able to start operation under the condition which has 0.9V input voltage to generate 3.3V output voltage with a 33 Ωload resistor, suitable for mobile equipment using only one Alkaline battery or one Nickel metal hydride battery. During the operation of a shutdown, the load disconnection function enables to cut the current conduction path from the input to the output. The output voltage is selectable in 0.1V increments within 1.8~5.0V (±2.0% accuracy). The UVLO function of the XC9135 series is capable to reduce leaking potassium hydroxide by stopping IC operation while battery voltage is declining. The release voltages of UVLO are 0.85V (±6.0% accuracy) and 1.6V (±3.0% accuracy), and selectable voltages range of 0.9V~3.0V.

File format: PDF Size:826 KB

XC9131 series is a synchronous step-up DC/DC converter with a 0.2Ω(TYP.) N-channel driver transistor and a 0.2Ω(TYP.) synchronous P-channel switching transistor built-in. A highly efficient and stable current can be supplied up to 1.0A by reducing ON resistance of the built-in transistors. The series are able to start operation under the condition which has 0.9V input voltage to generate 3.3V output voltage with a 33Ωload resistor, suitable for mobile equipment using only one Alkaline battery or one Nickel metal hydride battery. During the operation of a shutdown, the load disconnection function enables to cut the current conduction path from the input to the output. The series has 0.5V (±0.01V) reference voltage integrated and being able to set an output voltage with external components.

File format: PDF Size:1026 KB

The XC9128/XC9129 series are synchronous step-up DC/DC converters with a 0.2 (TYP.) N-channel driver transistor and a synchronous 0.2 (TYP.) P-channel switching transistor built-in. A highly efficient and stable current can be supplied up to 1.0A by reducing ON resistance of the built-in transistors. With a high switching frequency of 1.2MHz, a small inductor is selectable making the series ideally suited for applications requiring low profile or space saving solutions.

File format: PDF Size:452 KB

XC9119D10A series 1MHz, PWM controlled step-up DC/DC converter, designed to allow the use of ceramic capacitors.

File format: PDF Size:300 KB