IDT Manuals

This document describes the features and characteristics of the IDT23S08E 3.3V Zero Delay Clock Multiplier, including phase-lock loop clock distribution, output control, low jitter, and external feedback. The product is suitable for applications ranging from 10MHz to 200MHz operating frequency.

File format: PDF Size:59 KB

The IDT23S08T is a high-speed phase-lock loop (PLL) clock multiplier designed for high-speed clock distribution and multiplication applications. It has two banks of four outputs each that can be controlled via two select addresses.

File format: PDF Size:46 KB

The IDT23S09 is a high-speed phase-lock loop (PLL) clock buffer designed for high-speed clock distribution applications. It achieves zero delay and operates within the range of 10 to 133MHz. The IDT23S09 accepts one reference input and drives two banks of four low skew clocks. The -1H version of this device has higher drive capability at 133MHz frequency.

File format: PDF Size:55 KB

The IDT23S09E is a high-speed clock buffer that operates in the range of 10MHz to 200MHz. It features an on-chip PLL lock-loop that ensures the output clock is synchronized with the input clock. The IDT23S09E has low jitter and distortion, making it ideal for high-speed clock distribution applications.

File format: PDF Size:55 KB

This document describes the features and characteristics of the IDT23S05 3.3V Zero Delay Clock Buffer, including phase-lock loop clock distribution, 10MHz to 133MHz operating frequency, five outputs, low jitter, and zero input-output delay.

File format: PDF Size:61 KB

IDT23S08 is a 3.3V zero delay clock multiplier, which can achieve 1x, 2x, 4x clock outputs

File format: PDF Size:59 KB

This document introduces the features and characteristics of the IDT2309NZ nine output 3.3V clock buffer. This buffer supports two DIMMs or four SO-DIMMs and has one additional output for feedback to an external or chipset PLL. The buffer operates at 3.3V and outputs can run up to 133.33MHz. The buffer has low power consumption, low EMI and high drive capability and can be used in mobile PC systems and desktop PC systems.

File format: PDF Size:40 KB

The IDT2309NZ is a low-cost buffer designed to distribute high-speed clocks in mobile PC systems and desktop PC systems with SDRAM support.

File format: PDF Size:40 KB

The IDT2309A is a 3.3V zero delay clock buffer designed for high-speed clock distribution applications. The device operates within the range of 10 to 133MHz and distributes one clock input to one bank of five and one bank of four outputs. Each output bank has a separate enable signal. The output skew is less than 250ps, and the jitter is less than 200 ps. The device is available in standard drive (IDT2309A-1) and high drive (IDT2309A-1H) versions. No external RC network is required, and the device operates at 3.3V VDD. The device is available in SOIC and TSSOP packages.

File format: PDF Size:54 KB

This is a technical introduction to IDT's MIPS-IV processor, providing the features and characteristics of the processor.

File format: PDF Size:286 KB

IDT2305 is a high-precision clock buffer from IDT company, which supports 10MHz to 133MHz frequency and has 5 output ports. It has zero delay output and the output clock jitter is less than 200ps.

File format: PDF Size:131 KB

IDT2308 is a 3.3V zero delay clock multiplier that can be used for applications with frequencies ranging from 10MHz to 133MHz. The IDT2308 distributes one clock input to two four-output arrays and provides independent output enable for each output array. The external feedback (FBK) pin is used to synchronize the outputs to the clock input. The output skew is less than 200 ps and the cycle-to-cycle jitter is less than 200 ps. IDT2308 provides 1x, 2x, 4x output options, which can be selected according to needs. IDT2308 does not require an external RC network, operates at 3.3V, and is available in TSSOP and SOIC packages.

File format: PDF Size:143 KB

This document describes the features and characteristics of IDT's TeraSync DDR/SDR FIFO product, including different memory organizations and clock operation frequencies.

File format: PDF Size:482 KB

This document introduces the high-speed SRAM memory produced by IDT, model DSC-5279/03 1. It supports 128K x 36 and 256K x 18 memory configurations, has high system access speed, supports interleaved and linear burst mode, has self-timed write cycle and global write control, suitable for commercial and industrial applications, and operates at 3.3V.

File format: PDF Size:284 KB

The IDT54/74FCT521/A/B/C is a fast CMOS 8-bit identity comparator released by IDT, with 1mW typical static power consumption, TTL input and output level compatibility, CMOS output level compatibility

File format: PDF Size:105 KB

The document describes the features and characteristics of the IDT723626, IDT723636, and IDT723646 products, including memory storage capacity, clock frequencies, FIFO data buffering, etc.

File format: PDF Size:568 KB

IDT70V24S/L is a 4K x 16 dual-port static RAM produced by IDT company. It supports simultaneous access to the same memory location, has high speed and low power consumption, and can expand the data bus width to 32 bits or more by using the Master/Slave select when cascading more than one device. It also has anti-static and interrupt functions.

File format: PDF Size:281 KB

16-bit fast CMOS registered transceivers/registers (3-state)

File format: PDF Size:180 KB

This document describes the features and characteristics of IDT's DSC 5900 product, including a 32-bit microprocessor, enhanced MIPS-II ISA, DSP instructions, MMU, cache management, interrupt controller, I2C interface, UARTs, counter/timers, general-purpose I/O pins, SDRAM controller, and peripheral device controller.

File format: PDF Size:588 KB

IDT54/74FCT16245T/AT/CT/ET Fast CMOS 16-bit bidirectional transceiver Military and Industrial temperature ranges

File format: PDF Size:84 KB