Board Manuals

This document introduces the use of Philips GoGear tablet PC, including how to turn on, charge, connect to Wi-Fi, install and more.

The TB62201AFG is a dual-stepping motor driver IC for OA equipment using PWM chopper type. It is driven by chopper micro-step pseudo sine wave. Two pairs of 16-bit latch and shift registers are built in the IC to drive two-phase stepping motors. The IC is optimal for driving stepping motors at high efficiency and with low-torque ripple.

This data sheet introduces the features and characteristics of the HEF4543B BCD to 7-segment latch/decoder/driver.

This document is about STARTERKIT MB91302 USER GUIDE user manual

This document is the operation manual for OMRON SYSMAC mini Programmable Controllers SK20-C�D�-D. It describes the precautions and safety measures for using the product.

This is the EPSON RC+ 5.0 User's Guide, version 5.4. This manual contains information on how to correctly use the Manipulator.

This document is about EPSON RC+ 3.5.0 release notes, which contains the latest information about this release and the things that need to be known before using this software

The PZM-N series is a low power general purpose voltage regulator diode produced by Philips Semiconductors. It is packaged in a SOT346 (SC59) plastic package and is suitable for surface mount design. The diode has a wide working voltage range of 2.4 to 75 V (E24 range) and a maximum total power dissipation of 300 mW.

The ISP1102 Universal Serial Bus (USB) transceiver is fully compliant with the Universal Serial Bus Specification Rev. 2.0. It can transmit and receive USB data at full-speed (12 Mbit/s). The transceiver allows USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 to 3.6 V to interface with the physical layer of the USB. It has an integrated 5 V-to-3.3 V voltage regulator for direct powering via the USB supply line VBUS. The transceiver has an integrated voltage detector to detect the presence of the VBUS voltage (VCC(5.0)). When VCC(5.0) or Vreg(3.3) is lost, the D+ and D- pins can be shared with other serial protocols. The transceiver is a bi-directional differential interface and is available in HBCC16 and HVQFN14 packages. It is ideal for use in portable electronic devices, such as mobile phones, digital still cameras, personal digital assistants and information appliances.

The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA). They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage regulator for direct powering via the USB supply VBUS. The ISP1105/1106/1107 range can be used as a USB device transceiver or a USB host transceiver. They can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.

ISP1109 is a USB transceiver device that supports CEA−936−A, Mini-USB Analog Carkit Interface. It is fully compliant with Universal Serial Bus Specification Rev. 2.0. The ISP1109 can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. The ISP1109 is available in HVQFN32 package.

ISP1122 is a USB hub device from ISP company, supports 2 to 5 downstream ports, has low power consumption and can be powered by bus, self-powered or hybrid-powered

The ISP1123 is a USB 1.1 compliant compound Universal Serial Bus (USB) hub device. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator.

The TB6066FNG is a shock sensor IC produced by Toshiba. The chip operates from 2.7 to 5.5 volts DC and outputs a low-level signal. The chip has good signal-to-noise ratio and can be used in mechanical control systems such as servo control.

TB62600FG is an integrated circuit specifically designed for 64-bit thermal head drivers. It is designed to be used together with Bi-CMOS (DMOS) integrated circuits. The device consists of a 64-bit shift register, dual 64-bit latches, and 64 output DMOS structures.