Industrial

STM8AF5xxx/STM8AF6x69/7x/8x/9x/Ax is a high-performance 8-bit microcontroller in STM8A series, with a maximum frequency of 24 MHz, 32 to 128 Kbytes of Flash program memory, 2 Kbytes of Data EEPROM, 10-bit ADC, timers, LIN, CAN, USART, SPI, I2C and other peripherals.

STM32F101xC/D/E is a high-density access line, ARM-based 32-bit MCU with 256 to 512 KB Flash, 9 timers, 1 ADC and 10 communication interfaces

The STM32F103xC/xD/xE high-performance product line is a 32-bit MCU based on the ARM Cortex™-M3 core with 256 to 512KB Flash memory, USB, CAN, 11 timers, 3 ADCs and 13 communication interfaces.

The TL16C450 is a CMOS version of an asynchronous communications element (ACE) that typically functions in a microcomputer system as a serial interface. It features a programmable baud rate generator, full double buffering, addition or deletion of standard asynchronous communication bits (start, stop, and parity), and an independent receiver clock input.

The TL284x and TL384x series of control integrated circuits provide the features that are necessary to implement off-line or dc-to-dc fixed-frequency current-mode control schemes, with a minimum number of external components. Some of the internally implemented circuits are an undervoltage lockout (UVLO), featuring a start-up current of less than 1 mA, and a precision reference trimmed for accuracy at the error amplifier input. Other internal circuits include logic to ensure latched operation, a pulse-width modulation (PWM) comparator (that also provides current-limit control), and a totem-pole output stage designed to source or sink high-peak current. The output stage, suitable for driving N-channel MOSFETs, is low when it is in the off state. Major differences between members of these series are the UVLO thresholds and maximum duty-cycle ranges.

The ST7260xx is an STMicroelectronics low speed USB 8-bit MCU family with high density Flash (HDFlash), FastROM with readout and write protection, in-application programming (IAP) and in-circuit programming (ICP), 384 bytes RAM memory (128-byte stack), 12 or 24 MHz oscillator, RAM Retention mode, optional low voltage detector (LVD) and other features.

The ST72344xx, ST72345xx are 8-bit MCUs from STMicroelectronics with up to 16 Kbytes Flash memory, 10-bit ADC, two 16-bit timers, two I2C, SPI, SCI interfaces

This document introduces ST72561xx-Auto, an 8-bit MCU for automotive applications with features including Flash or ROM, 10-bit ADC, 5 timers, SPI, LINSCI™, and active CAN.

TL16C2550 is a 2.5V to 5V dual universal asynchronous receiver/transmitter with 16-byte FIFOs. It features internal diagnostic capabilities, programmable auto-RTS and auto-CTS, and fully prioritized interrupt system controls. The product is suitable for point-of-sale terminals, gaming terminals, portable applications, router control, cellular data, and more.

The document describes a 16-bit MCU called ST10F273Z4, which has high performance features including 512 Kbyte flash memory and 36 Kbyte RAM. It features a high performance 16-bit CPU with DSP functions, with a 31.25 ns instruction cycle time and a maximum CPU clock of 64 MHz. It also has enhanced boolean bit manipulations, single-cycle context switching support, and other features. The MCU has 512 Kbyte on-chip flash memory, 2 Kbyte internal RAM, and 34 Kbyte extension RAM. It supports programmable external bus configuration and characteristics, with 5 programmable chip-select signals and hold-acknowledge bus arbitration support. The MCU also features an 8-channel peripheral event controller, a 16-priority-level interrupt system, 2 multifunctional general purpose timer units, 2 16-channel capture/compare units, a 4-channel PWM unit, and a 4-channel XPWM unit. Additionally, it has a 24-channel 10-bit A/D converter, 2 synchronous/asynchronous serial channels, 2 high-speed synchronous channels, and an I2C standard interface. Finally, the MCU supports 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses.

The TC245 786- × 488-PIXEL CCD IMAGE SENSOR is a high-resolution, solid-state image sensor designed for use in single-chip B/W NTSC TV applications. It has an 8-mm image-area diagonal and is compatible with 1/2-inch Vidicon optics. The sensor has 755 (H) x 242 (V) active elements in the image-sensing area, advanced on-chip signal processing, low dark current, electron-hole recombination antiblooming, dynamic range of more than 70 dB, high sensitivity, high photoresponse uniformity, high blue response, single-phase clocking, and solid-state reliability.

ST10F276Z5 is a 16-bit MCU with MAC unit, 832 Kbyte flash memory and 68 Kbyte RAM. ST10F276Z5 has the following features: Highly performance 16-bit CPU with DSP functions, 31.25 ns instruction cycle time at 64 MHz max CPU clock, Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator, Enhanced boolean bit manipulations, Single-cycle context switching support.

This document describes the features and characteristics of the ST72361xx-Auto 8-bit MCU for automotive applications, including Flash or ROM memory, 10-bit ADC, 5 timers, SPI, and LINSCI features.

ST72321M6 ST72321M9 80-pin 8-bit MCU with 32 to 60 Kbytes Flash, ADC, five timers, SPI, SCI, I2C interface