3M Manuals

This is a data sheet of the wrist strap product of Static Control Components, Inc. The product name is Wrist Strap - Fabric Band, the model is WBB-AFWS61M, the features are adjustable fabric wristband and 6 or 12 ft coiled cord, with 360 degrees conductivity, it meets ANSI/ESD S-1.1, ANSI/ESD S-20.20, EIA 625, MIL-STD-1686, and MIL-HDBK-263 standards.

This document is the Utilities & Telecommunications product catalog for 3M Worldwide in Hong Kong. It provides information on static control solutions, workstation solutions, and hardware and accessories. Specifically, it includes the 3M™ Straight Grounding Cord, 5 ft, 3043, which is used to ground static control table mats to floor mats and runners. The grounding cord has a 1-megohm resistor.

3M™ 7201 static-sensitive caution label is designed to alert personnel handling bags, boxes or other carriers that the contents are static-sensitive. When made part of a comprehensive static control process, the labels help prevent improper handling of static-sensitive components. Available in single use or reusable forms using the accepted industry static symbols: JEDEC-14 (Joint Electronic Device Engineering.

3M 373 Series Mini-Clamp socket, 2 mm IDC wiremount, optional latch provides even quality, reduces maintenance work by providing higher connection reliability, reduces waste, operation by general tool “pliers” reduces tooling cost, design offers multiple gauges and wire size diameter, latch enables rugged field termination, RoHS* compliant

This document provides an overview of 3M's static control products, including the properties and technical information of static control mats and runners.

3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Vertical Receptacle - Shielded 102 Series are connectors produced by 3M company. The features of the product are that the contact material is copper alloy, which has reliable repetitive plugging performance, a rugged metal case, reliable PCB fixation, stable connection stability, IEEE 1284C interface, and the option of 14, 20, 26, 36, 40, 50, 68, 80 and 100 contacts.

3M Face Seal Cleaner 105 (New) is a respirator wipe produced by 3M. The main ingredients are water, isopropanol, anionic surfactants, etc. It is mainly used to clean the sealing pads of respirators. It is safe, convenient and odorless.

3M™ Polarized Boardmount Socket .100″ × .100″ Centerbump Polarization with Straight Solder Tails 9100 Series product with straight solder tails, the temperature rating is -55°C to +105°C, the rated current is 1 A, the insulation resistance is greater than 1 x 109 Ω at 500 VDC, 1000 Vrms at sea level voltage, and RoHS is supported.

Instruction manual

The 8810 respirator meets the European standard EN149:2001 and is classified as a FFP2 respirator. It has a protection factor of 10 and can effectively block dust and mist. However, it cannot block gases, vapors, solvents, and environments with oxygen content less than 19.5%.

This document is a Material Safety Data Sheet for 3M(TM) Polyimide Film Tape 5419 produced by 3M Company. According to the OSHA Hazard Communication Standard, this product should not present a health and safety hazard when used as recommended or under ordinary conditions. However, use or processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the performance of the product and may present potential health and safety hazards.

The 3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Vertical Receptacle - Shielded 102 Series is made of glass filled polyester (PBT) or glass filled polyester (PCT) with UL 94V-0 flammability rating. It can be installed through PCB. The interface is fixed by metal housing and screw lock for reliable PCB retention. It also has wiping contact head for reliable repetitive plugging. The interface provides 14, 20, 26, 36, 40, 50, 68, 80 and 100 contacts and has IEEE 1284C interface.

3M™ 9713 is an isotropic conductive pressure sensitive adhesive film that conducts electricity through the thickness (Z-axis) and in the plane of the adhesive (X, Y-axis). It is ideal for EMI/RFI shielding and attaching EMI/RFI seals to metal surfaces. Consists of a high-performance 3M adhesive with conductive fibers. 3M™ 9713 has good adhesive strength and good electrical performance. In addition, the conductive fibers in the 3M™ 9713 adhesive film provide improved handling properties. The electrically conductive adhesive film 3M™ 9713 is ideal for applying EMI shielding to electronic and electrical devices. 3M™ 9713 can be used with many metal foil shields such as aluminum/PVC or copper/PVC laminates for a custom shielding solution. It can also be used to attach conductive textile/foam core EMI seals to electrical housings. It can be applied in strips or die-cut parts in special shapes and sizes. Compared to screws or other mechanical connections, 3M™ 9713 requires less assembly time and allows a stable and seamless joint that ensures 100% shielding. 3M manufacturing plant is ISO 9002 certified.