ON Semiconductor manuals, page 6
ON NCV8501 Series Micropower 150 mA LDO Linear Regulators with ENABLE DELAY RESET Monitor FLAG datasheet(1)
NCV8501 is a family of precision micropower voltage regulators. Their output current capability is 150 mA. The family has output voltage options for adjustable, 2.5 V, 3.3 V, 5.0 V, 8.0 V, and 10 V. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.6 V at 150 mA. Low quiescent current is a feature drawing only 90 �A with a 100 �A load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active RESET (with DELAY), and a FLAG monitor which can be used to provide an early warning signal to the microprocessor of a potential impending RESET signal. The use of the FLAG monitor allows the microprocessor to finish any signal processing before the RESET shuts the microprocessor down. The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions. Features • Output
ON NCV8184 Micropower 70 mA Low Dropout Tracking Regulator/Line Driver handbook
This document introduces the characteristics of NCV8184 micropower 70mA low dropout tracking regulator/line driver, which can be used in automotive applications with remote sensors, or any situation where it is necessary to isolate the output of your regulator.
ON NCV8141 5.0 V 500 mA Linear Regulator with ENABLE RESET Watchdog handbook
The NCV8141 is a linear regulator suited for microprocessor applications in automotive environments. This ON Semiconductor part provides the power for the microprocessors along with many of the control functions needed in today’s computer based systems. Incorporating all of these features saves both cost, and board space. The NCV8141 provides a low sleep mode current as compared to the CS8141.
ON Semiconductor NCV7601 handbook
The NCV7601 is a quad driver from ONSEMI. It is suitable for a variety of loads. The device supports TTL/DTL/CMOS compatible inputs, features NAND logic and common enable, has a maximum working voltage of 60V, and typical applications include body and drivetrain electronics, incandescent lamps/LED loads, solenoid/relay/inductor loads, heater/resistor loads, stepper/DC motor loads.
ON NCV7510 FlexMOS Programmable Peak Hold PWM MOSFET Predriver handbook
The NCV7510 is a fully programmable high side MOSFET predriver designed for driving solenoids or other unipolar actuators. The product is optimized for common-rail diesel fuel injection applications and includes an additional synchronous clamp MOSFET predriver. Peak and hold currents, peak dwell time, and other features can be programmed via the device's SPI port. The load current is continuously sampled and compared to the programmable 7-bit peak/hold DAC values, and the load self-modulates to maintain the desired currents at each of the peak and hold points. Passive fault diagnostics monitor and protect the MOSFETs when a fault is detected. Fault data is available via SPI, and an open-drain FAULT output provides immediate fault notification to a host controller.
ON NCV7380 Advance Information LIN Transceiver handbook
The NCV7380 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which uses the network. The NCV7380 is designed to work in systems developed for LIN 1.3 or LIN 2.0. The IC furthermore can be used in ISO9141 systems. Because of the very low current consumption of the NCV7380 in recessive state, it’s suitable for ECU applications with low standby current requirements, whereby no sleep/wake−up control from the microprocessor is necessary.
ON NCV7361A Advance Information Voltage Regulator with Integrated LIN Transceiver handbook
The NCV7361A is a low drop voltage regulator with an integrated LIN transceiver. It features an output voltage of 5.0V and a maximum output current of 50mA. The LIN transceiver is compatible with LIN protocol specification 1.3, 2.0 and SAE J2602. The NCV7361A is ideal for use in LIN bus systems as a powerful, low-cost slave node.
ON NCV7356 Single Wire CAN Transceiver handbook
This data sheet provides information about the NCV7356 single wire CAN transceiver, including a description, specifications, and application examples.
ON NCP612 NCV612 100 mA CMOS Low Iq Voltage Regulator in an SC70-5 handbook
The NCP612/NCV612 series is a fixed output linear regulator designed for handheld communication equipment and portable battery powered applications that require low quiescent current. The NCP612/NCV612 series features an ultra-low quiescent current of 40μA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits. The NCP612/NCV612 is designed to be used with low-cost ceramic capacitors. The device is housed in the micro-miniature SC70-5 surface mount package. Standard voltage versions are 1.5, 1.8, 2.5, 2.7, 2.8, 3.0, 3.3, and 5.0 V.
ON NCP5662 NCV5662 Low Output Voltage Ultra Fast 2.0 A Low Dropout Linear Regulator with Enable handbook
The NCP5662/NCV5662 is a high performance, low dropout linear regulator designed for high power applications that require up to 2.0 A current. It is offered in both fixed and adjustable output versions. With output voltages as low as 0.9 V and ultra-fast response times for load transients, the NCP5662/NCV5662 also provides additional features such as Enable and Error Flag (for the fixed output version), increasing the utility of these devices. A thermally robust, 5 pin D2PAK, combined with an architecture that offers low ground current (independent of load), provides for a superior high-current LDO solution.
ON NCP552 NCP553 NCV553 80 mA CMOS Low Iq NOCAP handbook
NCP552 is an 80 mA CMOS low Iq NOCAP voltage regulator. This series of fixed output NOCAP linear regulators are designed for handheld communication equipment and portable battery powered applications which require low quiescent. This series features an ultra-low quiescent current of 2.8 µA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits. The NCP552 series provides an enable pin for ON/OFF control. These voltage regulators have been designed to be used with low cost ceramic capacitors. The devices have the ability to operate without an output capacitor. The devices are housed in the micro-miniature SC82-AB surface mount package. Standard voltage versions are 1.5, 1.8, 2.5, 2.7, 2.8, 3.0, 3.3, and 5.0 V. Other voltages are available in 100 mV steps.
ON NCP551 NCV551 150 mA CMOS Low Iq Low-Dropout Voltage Regulator handbook
NCP551, NCV551 150 mA CMOS Low Iq Low−Dropout Voltage Regulator is a low power voltage regulator designed by Semiconductor Components Industries, LLC. This voltage regulator has an ultra-low quiescent current and can be used in battery-powered devices.
ON NCP5504 NCV5504 250 mA Dual Output Low Dropout Linear Regulator handbook
The NCP5504/NCV5504 are dual output low dropout linear regulators with ±2.0% accuracy
ON TL494 NCV494 SWITCHMODE Pulse Width Modulation Control Circuit handbook
The TL494 is a fixed frequency pulse width modulation control circuit designed primarily for SWITCHMODE power supply control. The main features are: 1. Complete pulse width modulation control circuitry 2. Integrated oscillator with master or slave operation 3. Integrated error amplifiers 4. Integrated 5.0 V reference 5. Adjustable dead time control 6. Uncommitted output transistors rated to 500 mA source or sink 7. Output control for push-pull or single-ended operation 8. NCV prefix for automotive and other applications requiring site and control changes
ON L4949 NCV4949 100 mA 5.0 V Low Dropout Voltage Regulator with Power-On Reset handbook
The L4949 is a monolithic integrated 5.0 V voltage regulator with a very low dropout and additional functions such as power–on reset and input voltage sense. It is designed for supplying the micro–computer controlled systems especially in automotive applications.