National Semiconductor manuals, page 39
National Semiconductor LP2989 Micropower/Low Noise 500 mA Ultra Low-Dropout handbook
The LP2989 is a fixed-output 500 mA precision LDO regulator designed for use with ceramic output capacitors. It features ultra-low dropout voltage, low output noise, and low quiescent current.
National Semiconductor LP2987/LP2988 Micropower 200 mA Ultra Low-Dropout Voltage handbook
The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.
National Semiconductor LMC6762 Dual MicroPower Rail-To-Rail Input CMOS Comparator with Push-Pull Output handbook
LMC6762 is a dual-channel, low-power, rail-to-rail input, push-pull output comparator from TI. This product is suitable for low-power applications such as computers, mobile phones and measurement instruments.
National Semiconductor LM4756 Dual 7W Audio Power Amplifier w/Mute Standby Volume Control handbook
The LM4756 is a stereo audio amplifier capable of delivering 7W/channel at 10% distortion into a 4Ω or 8Ω load.
National Semiconductor LM150 Data Sheet
National Semiconductor LM1881 LM1881-X Video Sync Separator handbook
LM1881, LM1881-X Video Sync Separator is a video sync separator chip produced by Texas Instruments. It has a wide input signal range, strong anti-interference ability and high reliability. It can be widely used in TV, computer, mobile phone and other electronic devices.
National Semiconductor LM12434/LM12ÀLÓ438 12-Bit a Sign Data Acquisition System with Serial I/O Self-Calibration handbook
The LM12434 and LM12-L-438 are highly integrated data acquisition systems operating on 3V to 5V. They combine a fully-differential self-calibrating 13-bit (12-bit signed) analog-to-digital converter (ADC) and sample-and-hold (S&H) with extensive analog and digital functionality. Up to 32 consecutive conversions can be stored in an internal 32-word (16-bit wide) FIFO data buffer. An internal 8-word instruction RAM can store the conversion sequence for up to eight acquisitions through the LM12-L-438's eight-input multiplexer. The LM12434 has a four-channel multiplexer, a differential multiplexer output, and a differential S&H input. The LM12434 and LM12-L-438 can also operate with 8-bit signed resolution and in a supervisory 'watchdog' mode that compares an input signal against two programmable limits. Acquisition times and conversion rates are programmable through the use of internal clock-driven timers. The differential reference voltage inputs can be externally driven for absolute or ratiometric operation. All registers, RAM, and FIFO are directly accessible through the high-speed and flexible serial I/O interface bus. The serial interface bus is user selectable for interface connections.
NATIONAL MNLM710-X REV 1AL DATA SHEET
This document is a military datasheet for the LM710H-MLS voltage comparator.
National Semiconductor MM54C240/MM74C240 Inverting MM54C244/MM74C244 Non-Inverting Octal Buffers Line Drivers with TRI-STATEÉ Outputs handbook
MM54C240 and MM74C240 are eight-channel buffers and line drivers with TRI-STATE outputs, specially designed for driving capacitive loads such as bus systems.
National Semiconductor DS2003/DS9667/DS2004 High Current/Voltage Darlington Drivers handbook
This data sheet lists the detailed information of TL�F�9647 DS2003�DS9667�DS2004 High Current�Voltage Darlington Drivers, including package, pin, parameters, applications, etc.
NATIONAL SEMICONDUCTOR ADC11DL066 Dual 11-Bit 66 MSPS 450 MHz Input Bandwidth A/D Converter w/Internal Reference Manual
The ADC11DL066 is a dual, low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 11-bit digital words at 66 Megasamples per second (MSPS), minimum. This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption while providing excellent dynamic performance and a 450 MHz Full Power Bandwidth. Operating on a single 3.3V power supply, the ADC11DL066 achieves 10.3 effective bits and consumes just 686 mW at 66 MSPS, including the reference current. The Power Down feature reduces power consumption to 75 mW. The differential inputs provide a full scale differential input swing equal to 2 times VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. The digital outputs from the two ADCs are available on separate 11-bit buses with an output data format choice of offset binary or two’s complement. To ease interfacing to lower voltage systems, the digital output driver power pins of the ADC11DL066 can be connected to a separate supply voltage in the range of 2.4V to the digital supply voltage. This device is available in the 64-lead TQFP package and will operate over the industrial temperature range of −40˚C to +85˚C. An evaluation board is available.
NATIONAL SEMICONDUCTOR LP2982 Micropower 50 mA Ultra Low-Dropout Regulator in SOT-23 micro SMD Packages Manual
The LP2982 is a 50mA ultra-low dropout regulator from TI company, using SOT-23 and micro SMD packages, the working voltage range is 2.5V-5.0V, the typical dropout voltage is 120mV@50mA load, 7mV@1mA load, the minimum working voltage is 2.3V, the minimum static current is 1µA, supports 1.0% precision output voltage, and the typical output noise is 30µV, it can meet the needs of various battery-powered applications.
NATIONAL SEMICONDUCTOR ADC12C105 12-Bit 95/105 MSPS A/D Converter Manual
NATIONAL SEMICONDUCTOR LM2673 SIMPLE SWITCHER 3A Step-Down Voltage Regulator with Adjustable Current Limit Manual
NATIONAL SEMICONDUCTOR ADC088S052 8-Channel 200 kSPS to 500 kSPS 8-Bit A/D Converter Manual
The ADC088S052 is a low-power, eight-channel CMOS 8-bit analog-to-digital converter specified for conversion throughput rates of 200 kSPS to 500 kSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept up to eight input signals at inputs IN0 through IN7. The output serial data is straight binary and is compatible with several standards, such as SPI™, QSPI™, MICROWIRE™, and many common DSP serial interfaces. The ADC088S052 may be operated with independent analog and digital supplies. The analog supply (VA) can range from +2.7V to +5.25V, and the digital supply (VD) can range from +2.7V to VA. Normal power consumption using a +3V or +5V supply is 1.2 mW and 6.5 mW, respectively. The power-down feature reduces the power consumption to 0.03 µW using a +3V supply and 0.15 µW using a +5V supply. The ADC088S052 is packaged in a 16-lead TSSOP package. Operation over the extended industrial temperature range of −40˚C to +105˚C is guaranteed.