intersil Manuals

EL7242/EL7252 Dual Input, High Speed, Dual Channel Power MOSFET Driver

ICL7134 is a 14-bit multiplying microprocessor-compatible D/A converter with 14-bit linearity (0.003% FSR), no gain adjustment required, and is compatible with double buffered inputs. Bipolar applications require no extra adjustments or external resistors. Low linearity and gain temperature coefficients. Low power dissipation. Full Four-Quadrant Multiplication. 883B Processed versions available.

The HIP6601A, HIP6603A, and HIP6604 are high-frequency, dual MOSFET drivers specifically designed to drive two power N-Channel MOSFETs in a synchronous rectified buck converter topology. These drivers combined with a HIP63xx or an ISL65xx Multi-Phase Buck PWM controller form a complete core-voltage regulator solution for advanced microprocessors. The HIP6601A drives the lower gate in a synchronous rectifier to 12V, while the upper gate can be independently driven over a range from 5V to 12V. The HIP6603A drives both upper and lower gates over a range of 5V to 12V. This drive-voltage flexibility provides the advantage of optimizing applications involving trade-offs between switching losses and conduction losses. The HIP6604 can be configured as either a HIP6601A or a HIP6603A. The output drivers in the HIP6601A, HIP6603A, and HIP6604 have the capacity to efficiently switch power MOSFETs at frequencies up to 2MHz. Each driver is capable of driving a 3000pF load with a 30ns propagation delay and 50ns transition time. These products implement bootstrap

HMU16/883 is a 16-bit parallel multiplier that supports two's complement, unsigned magnitude and mixed mode multiplication. Its input and output are compatible with TTL.

EL5611 and EL5811 are low power, high voltage rail-to-rail input-output amplifiers primarily targeted at VCOM applications in TFT-LCD displays. The EL5611 contains six amplifiers, and the EL5811 contains eight amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 2.5mA per amplifier, the EL5611 and EL5811 have a bandwidth of 60MHz (-3dB). They also provide common mode input ability beyond the supply rails, as well as rail-to-rail output capability. This enables these amplifiers to offer maximum dynamic range at any supply voltage. The EL5611 and EL5811 also feature fast slewing and settling times, as well as a high output drive capability of 65mA (sink and source). In addition to VCOM applications, these features make these amplifiers ideal for high speed filtering and signal conditioning application. Other applications include battery power, portable devices, and anywhere low power consumption is important. The EL5611 is available in 8-pin MSOP and 8-pin HMSOP package.

the x98021 is a 210mhz triple video digitizer with digital pll produced by intersil. it supports rgb or yuv video signal acquisition, with a maximum sampling rate of 210ms/s and a maximum resolution of uxga.

HIP1011B is the third product in the HIP1011 family and is an electronic circuit breaker that monitors, reports and protects circuits from excessive load currents. As a pin-for-pin drop-in alternative offering similar functionality to the widely used HIP1011, the HIP1011B is compatible with CompactPCI peripheral boards and PCI Hot Plug systems where voltage “health” monitoring and reporting are centralized by the system controller IC. The HIP1011B does not monitor nor respond to under voltage conditions thus making control of a wide range of voltages possible. The HIP1011B creates a small and simple yet complete power control solution to control the four independent supplies (+5V, +3.3V, +12V, and -12V) found in PCI and CompactPCI systems. For the +12V and -12V supplies, overcurrent protection is provided internally with integrated current sensing FET switches. For the +5V and +3.3V supplies, overcurrent protection is provided by sensing the voltage across the external current-sense resistors. The PWRON input controls the state of both internal and external switches. During an overcurrent condition on any output, all MOSFETs are latched-off and a LOW (0V) is asserted on the FLTN output. The FLTN latch is cleared when the PWRON input is toggled low again. During initial power-up of the main VCC supply (+12V), the PWRON input is inhibited from turning on the switches, and the latch is held in the Reset state until the VCC input is greater than VCCREF.

HA-2540 is a high performance operational amplifier from Intersil that features high output power and low noise characteristics. It is suitable for large signal audio and video circuits.

EL4332 is a triple very high speed 2:1 Multiplexer- Amplifier from Elantec. It is intended primarily for component video multiplexing and is especially suited for pixel switching. All three amplifiers are switched simultaneously from their A to B inputs by the TTL/CMOS compatible, common A/B control pin. A -3dB bandwidth of 300MHz together with 3ns multiplexing time enable the full performance of the fastest component video systems to be realized.

The HIP6004B is one of the HIP6000 series PWM controllers that integrates all of the control, output adjustment, monitoring and protection functions into a single package, providing complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications.

ISL60002 is a low power precision analog voltage reference produced by Intersil, which has ultra-low static current (400nA), can work at a supply voltage of 2.7V to 5.5V, and has an initial accuracy of ±1.0mV and <<10ppm/√1kHrs long-term stability.

This document introduces three models of N-channel power MOSFETs, FRK264D, FRK264R, and FRK264H, with features including 34A current, 250V voltage, 0.120 ohm RDS(on), radiation hardness, neutron hardness, and dose hardness.

This document describes the features and characteristics of the HGTP10N40C1, 40E1, 50C1, 50E1 and HGTH12N40C1, 40E1, 50C1, 50E1 models of 10A, 12A, 400V and 500V N-Channel IGBTs, such as low on-state voltage, fast switching speeds, high input impedance, etc. These devices are suitable for power supplies, motor drives, and protection circuits.

The X98027 275MHz Triple Video Digitizer with Digital PLL

The Intersil ISL43681 and ISL43741 devices are precision, bidirectional, analog switches configured as an 8 channel and a differential 4 channel multiplexer/demultiplexer.