Honeywell Manuals

32Kx8 Radiation Hardened ROM is a high performance 32768 word x 8-bit read only memory with industry-standard functionality. It is fabricated with Honeywell’s radiation hardened technology, and is designed for use in systems operating in radiation environments. The ROM operates over the full military temperature range and re- quires only a single 5 V ± 10% power supply. The ROM is available with either TTL or CMOS compatible I/O. Power consumption is typically less than 15 mW/MHz in operation, and less than 5 mW when de-selected. The ROM operation is fully asynchronous, with an associated typical access time of 14 ns. Honeywell’s enhanced SOI RICMOS™IV (Radiation Insen- sitive CMOS) technology is radiation hardened through the use of advanced and proprietary design, layout, and pro- cess hardening techniques. The RICMOS™ IV process is a 5-volt, SIMOX CMOS technology with a 150 Å gate oxide and a minimum drawn feature size of 0.75 µm (0.6 µm effective gate length—Leff). Additional features include tungsten via plugs, Honeywell’s proprietary SHARP pla- narization process, and a lightly doped drain (LDD) struc- ture for improved short channel reliability.

32K x 8 High Performance Radiation Hardened ROM is an industry standard functionality 32768 word x 8-bit read only memory. It is fabricated with Honeywell’s radiation hardened technology, and is designed for use in systems operating in radiation environments. The ROM operates over the full military temperature range and re- quires only a single 5 V ± 10% power supply. The ROM is available with either TTL or CMOS compatible I/O. Power consumption is typically less than 15 mW/MHz in operation, and less than 5 mW when de-selected. The ROM operation is fully asynchronous, with an associated typical access time of 14 ns. Honeywell’s enhanced SOI RICMOS™IV (Radiation Insen- sitive CMOS) technology is radiation hardened through the use of advanced and proprietary design, layout, and pro- cess hardening techniques. The RICMOS™ IV process is a 5-volt, SIMOX CMOS technology with a 150 Å gate oxide and a minimum drawn feature size of 0.75 µm (0.6 µm effective gate length—Leff). Additional features include tungsten via plugs, Honeywell’s proprietary SHARP pla- narization process, and a lightly doped drain (LDD) struc- ture for improved short channel reliability.

HMC6042 is a surface mount multi-chip module designed for low field magnetic sensing such as low cost compassing and magnetometry.

This document presents the switch catalog of Honeywell Sensing and Control, including Ultra Duty Pressure Switches, Extended Duty Pressure Switches, Extended Duty Vacuum Switches, Extended Duty Piston Switches, Factory Set Variable Differential Pressure & Vacuum Switches, and High Pressure Environmentally Sealed Extreme-Duty Switches. These switch products are suitable for various applications in harsh environments and can be customized according to customer requirements.

This document is the installation instructions for the 4AV series vane sensors. It introduces the product's features and characteristics, including electrical characteristics and installation dimensions.

This is the introduction document of Honeywell's HX6408 512k x 8 STATIC RAM. The product is a high-performance 524,288 word x 8-bit static random access memory with optional industry-standard functionality. It is fabricated with Honeywell's radiation hardened Silicon On Insulator (SOI) technology, and is designed for use in low voltage systems operating in radiation environments.

32K x 8 STATIC RAM—SOI HX6356 Aerospace Electronics

The SS340RT and SS440R series unipolar Hall-effect digital position sensors are small, versatile digital Hall-effect devices operated by the magnetic field from a permanent magnet or an electromagnet. They are designed to respond to a single pole: North (SS340RT Series) or South (SS440R Series). These unipolar sensors are supplied in three different magnetic sensitivities to meet a wide range of potential applications. The SS341RT and SS441R offer the highest sensitivity, with a typical operating point of 85 G at 25 °C [77 °F]; the SS343RT and SS443R offer medium sensitivity with 125 G typical at 25 °C [77 °F]; the SS349RT and SS449R offer the lowest sensitivity, requiring 350 G typical to operate at 25 °C [77 °F]. These sensors are available in two package styles. The SS340RT Series is available in the miniature SOT-23 surface mount package; the SS440R is available in the leaded, flat TO-92-style package. The SS340RT’s small size requires less PC board space, allowing it to be used in smaller assemblies. Its 3 V capability allows for use in low voltage applications, promoting energy efficiency. The SS340RT Series is available on tape and reel (3000 units per reel); the SS440R Series is available in a bulk package (1000 units per bag). • FEATURES/BENEFITS Subminiature package size (SS340RT Series) supplied on tape and reel allows for a compact design with automated component placement, helping to reduce manufacturing costs.

The document describes the features and characteristics of the Solid State Sensors GT1 series Hall Effect gear tooth sensors. These sensors can be used in automotive, heavy duty vehicles, and industrial applications such as camshaft and crankshaft speed/position detection, transmission speed, tachometers, anti-skid/traction control, etc. They feature digital current sinking output, better signal-to-noise ratio, fast operating speed, and EMI resistance.

The SS351AT and SS451A sensors are small, versatile digital Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet. They are designed to respond to either a North pole or a South pole. These omnipolar sensors are sensitive and flexible devices designed to meet a wide range of potential applications. The SS351AT and SS451A have a typical operating point of 85 G at 25 °C [77 °F]. Because they can be operated by a North pole or a South pole, they do not require the magnet polarity to be identified, thus making the installation easier and potentially reducing the system cost. These sensors are available in two package styles. The SS351AT is available in the subminiature SOT-23 surface mount package; the SS451A is available in the leaded, flat TO- 92-style package. The SS351AT’s small size requires less PC board space, allowing it to be used in smaller assemblies. Its 3 Vdc capability allows for use in low voltage applications, promoting energy efficiency. The SS351AT is available on tape and reel (3000 units per reel); the SS451A is available in a bulk package (1000 units per bag).

HEL-700 Thin Film Platinum RTDs (Resistance Temperature Detectors) provide excellent linearity, accuracy, stability and interchangeability. Resistance changes linearly with temperature. Laser trimming provides ±0.3°C interchangeability at 25°C. 1000, 375 alpha provides 10X greater sensitivity and signal-to-noise. Both 1000 and 100 provide interchangeabilities of ±0.6°C or better from -100°C to 100C, and ±3.0°C at 500°C.

This manual provides detailed instructions on how to operate the Honeywell HW5500/HW5500E portable gasoline generator.