Fairchild Manuals

1V5KE6V8(C)A - 1V5KE440(C)A 1V5KE6V8(C)A - V5KE440(C)A, Rev. D are 1500 Watt Transient Voltage Suppressors produced by Fairchild Semiconductor Corporation. They have the following features: Glass passivated junction.,1500W Peak Pulse Power capability at 1.0 ms.,Excellent clamping capability.,Low incremental surge resistance.,Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional.,Typical IR less than 1.0 µA above 10V.,UL certified, UL #E210467.

FAN5333A/FAN5333B is a high-efficiency, high-current serial LED driver with a 30V integrated switch from Fairchild Semiconductor Corporation. The device has a 1.5MHz switching frequency, low noise, adjustable output voltage, up to 1.5A peak switch current and 1.5W output power capability.

The FSAV430 is a high performance Quad SPDT (2-to-1 multi-plexer/demultiplexer) video switch designed specifically for switching high definition YPbPr and computer RGB (up to UXGA) signals. The bandwidth of this device is 1.1GHz (Typ) which allows signals to pass with minimal edge and phase dis- tortion. Image integrity is maintained with low crosstalk, high OFF-Isolation and low differential gain and phase. The low On Resistance (4.5� typical) minimizes signal insertion loss. Low voltage operation (3V), low power consumption (1uA maximum) and small scale packaging (including leadless DQFN) make this device ideal for a broad range of applications.

The FAN5611/FAN5612/FAN5613/FAN5614 are low-dropout LED drivers from Fairchild Semiconductor Corporation. These drivers support up to 4 parallel LEDs and have undervoltage protection, overcurrent protection and thermal shutdown. Additionally, the drivers support both analog and PWM dimming.

High Speed 10MBit/s Logic Gate Optocouplers

74F20 is a dual 4-input NAND gate that contains two independent gates, each of which performs the logic NAND function.

The document describes the 74LCX04 low voltage hex inverter produced by Fairchild Semiconductor Corporation. The product features 5V tolerant inputs, allowing the interface of 5V systems to 3V systems. The 74LCX04 is fabricated with advanced CMOS technology to achieve high-speed operation while maintaining low power dissipation.

KSR1001 is a NPN Epitaxial Silicon Transistor produced by Fairchild Semiconductor Corporation. Its maximum collector-base voltage is 50V, maximum collector-emitter voltage is 50V, maximum emitter-base voltage is 10V, maximum collector current is 100mA, maximum collector power dissipation is 300mW, and maximum junction temperature is 150℃. Storage temperature range is -55℃ to 150℃.

FSAV332 is a quad high speed video switch from Fairchild Semiconductor. It has low on-resistance, wide bandwidth, low power consumption and so on, which makes it suitable for LCD, Plasma, Projector displays.

This document describes the absolute maximum ratings and electrical characteristics of the FJNS3208R NPN epitaxial silicon transistor. It is suitable for switching circuits, inverters, interface circuits, and driver circuits.

The FJNS4201R is a PNP epitaxial silicon transistor from Fairchild Semiconductor Corporation. Its maximum collector-emitter voltage is -50 V, collector-base voltage is -50 V, collector current is -100 mA, collector power dissipation is 300 mW, junction temperature is 150 °C, and storage temperature is -55~150 °C.

The FAN5332A is a high efficiency, high current serial LED driver and OLED supply with a 30V integrated switch.

FJNS4203R is a PNP epitaxial silicon transistor with low power and high frequency characteristics. It is suitable for applications such as switching circuits, inverters, interface circuits, and driver circuits. Additionally, it features a built-in bias resistor.

The FAN5099 is a wide frequency synchronous buck PWM and LDO controller, with high efficiency, low power consumption and multiple applications

The FAN5610 is a LED driver chip produced by Fairchild Semiconductor. The chip has a function of driving 4 parallel-connected LEDs, supporting low VF LED low voltage direct lithium-ion battery applications. Each LED has an independent control loop and can provide regulated, matched constant current. The chip has no external components, no EMI and switching noise, and an integrated DAC for digital and PWM brightness control. The maximum efficiency can reach 91%, the maximum bias current can reach 84mA (21mA/LED), the input voltage range is 2.7V to 5.5V, and the shutdown mode current is less than 1µA. The package is 3mmX3mm MLP-8.