MAXIM Manuals (Others)

MAX3230E/AE and MAX3231E/AE are +2.5V to +5.5V powered EIA/TIA-232 and V.28/V.24 communications interfaces with low power requirements, high data-rate capabilities, and enhanced electrostatic discharge (ESD) protection, in a chip-scale package (UCSP™) and WLP package.

File format: PDF Size:217 KB

The MAX869L is a P-channel load switch with accurate user-set current limit and low on-resistance. It is designed to protect the power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage range is 2.7V to 5.5V. The MAX869L features a 2A, 45mΩ switch controlled by a logic signal. The current limit can be set from 400mA to 2.4A with ±21% accuracy using a single resistor. The device has a low quiescent supply current of 12µA, which reduces to a maximum of 2µA in shutdown. It also includes thermal shutdown protection and a logic signal output pin (FAULT) for indicating overcurrent or overtemperature conditions. For other devices in this family, please refer to the Selector Guide.

File format: PDF Size:91 KB

MAX893L is a high-side load switch from Maxim Integrated. It operates with input voltages from +2.7V to +5.5V and can continuously output up to 1.2A of current. The short-circuit current is limited to 1.8A. The switch features internal current-limiting circuitry and thermal overload protection.

File format: PDF Size:116 KB

MAX1607 is a precise preset current-limited switch for USB applications. The switch has low quiescent supply current and standby current to conserve battery power in portable applications.

File format: PDF Size:247 KB

The MAX1838 is a dual, current-limited USB switch with auxiliary input supply. Each switch meets all IEC specifications for USB ports and is guaranteed to supply 500mA from either of two input supplies. A control pin selects the power source from either the main or auxiliary supply. The MAX1838 has multiple protection features, including independent thermal-shutdown on each channel to limit junction temperature in case of a prolonged short or overload condition. The device has accurate internal current-limit and reverse-current protection to safeguard the input supply against overload. When powered from the auxiliary supply, the current limit on each channel is set independently with an external resistor. An autoreset feature latches the switch off if the output is shorted, thereby saving system power. When the short is removed, the switch automatically turns back on. Independent fault signals (FAULTA and FAULTB) notify the microprocessor (µP) that the internal current limit has been reached. A 20ms fault-blanking feature prevents the MAX1838 from issuing false alarms to the host during power-up or when hot-swapping into a capacitive load. The MAX1838 is available in a space-saving 16-pin QSOP. For other USB current-limited switches, refer to the MAX1693, MAX1694, MAX1812, and MAX1823.

File format: PDF Size:316 KB

The MAX1922 is a 1A current-limited switch with built-in fault blanking that provides an accurate, preset 1.4A to 2.1A current limit, making it ideal for dual USB applications. Its low quiescent supply current (16µA) and standby current (1µA) conserve battery power in portable applications. The MAX1922 operates with inputs from 2.7V to 5.5V, making it ideal for both 3V and 5V systems. An overcurrent signal (OC) notifies the microprocessor that the internal current limit has been reached. A 10ms overcurrent-blanking feature allows momentary faults (such as those caused when hot-swapping into a capacitive load) to be ignored, thus preventing false alarms to the host system. This blanking also prevents an OC signal from being issued when the device is powering up. The MAX1922 has several safety features to ensure that the USB port is protected. Built-in thermal-overload protection limits power dissipation and junction temperature. The device also has accurate internal current-limiting circuitry to protect the input supply against overload. The MAX1922 is offered in a space-saving 8-pin SO package and a 10-pin TDFN package.

File format: PDF Size:181 KB

MAX1931 is a 60 mΩ switch with an accurate preset current limit of 0.64A to 1.06A, making it ideally suited for USB applications.

File format: PDF Size:215 KB

MAX1940 is a triple current-limited switch with auto-reset that supplies a guaranteed 500mA load per channel in accordance with USB specifications. The MAX1940 operates from a 4V to 5.5V input supply and consumes only 60µA of quiescent current when operating and only 3µA in standby. Selectable active-high/active-low con- trol logic and independent shutdown controls for each channel provide additional flexibility. An autoreset fea- ture latches the switch off in the event of a short circuit, saving system power. The switch reactivates upon removal of the shorted condition. The MAX1940 provides several safety features to pro- tect the USB port. Built-in thermal-overload protection turns off the switch when the die temperature exceeds +160°C. Accurate internal current-limiting circuitry pro- tects the input supply against both overload and short- circuit conditions. Independent open-drain fault signals (FAULTA, FAULTB, and FAULTC) notify the micro- processor when a thermal-overload, current-limit, undervoltage lockout (UVLO), or short-circuit fault occurs. A 20ms fault-blanking feature enables the cir- cuit to ignore momentary faults, such as those caused when hot-swapping a capacitive load, preventing false alarms to the host system. The fault-blanking feature also prevents fault signals from being issued when the device powers up the load. The MAX1940 is available in a space-saving 16-pin QSOP package and operates over the extended (-40°C to +85°C) temperature r

File format: PDF Size:250 KB

The MAX1562/MAX1562H/MAX1563 single current-limited switches provide up to 4A to power up to eight USB ports. They operate from a 4V to 5.5V input supply and consume only 40µA of quiescent current when operating and only 3µA in shutdown. The MAX1562/MAX1562H/MAX1563s’ autoreset feature latches the switch off if the output is shorted, thereby saving system power. When the short is removed, the switch is reactivated. A fault-blanking feature enables the circuit to ignore momentary faults, such as those caused when hot swapping a capacitive load, preventing false alarms to the host system. Fault blanking also prevents fault signals from being issued when the device powers up the load. The MAX1562/MAX1562H/MAX1563 provide several safety features to protect the USB port. Built-in thermal-overload protection turns off the switch when the die temperature exceeds +160°C. Accurate internal cur- rent-limiting circuitry protects the input supply against both overload and short-circuit conditions. An open- drain fault signal (FAULT) notifies the microprocessor when a thermal-overload, current-limit, undervoltage lockout (UVLO), or short-circuit fault occurs. The MAX1562 has an active-low ON, and the MAX1562H has an active-high ON enable input. The MAX1563 has a selectable active-high or active-low logic-controlled enable. The current limit is pro- grammed from 1A to 4A using a resistor. The MAX1562/MAX1562H are available in 8-pin SO packages and are pin-compatible u

File format: PDF Size:541 KB

MAX1558/MAX1558H is a dual, current-limited switch with autoreset for USB applications. Autoreset latches the switch off if it is shorted for more than 20ms, saving system power. The shorted output is then tested to determine when the short is removed to automatically restart the channel. Each channel delivers up to 1.2A and meets all IEC specifications for USB ports. Low quiescent supply current (45µA) and standby current (3µA) conserve battery power in portable applications. The MAX1558/MAX1558H safety features ensure that the USB port is protected. Built-in thermal-overload protection limits power dissipation and junction temperature. Accurate, programmable current-limiting circuitry pro- tects the input supply against both overload and short-cir- cuit conditions. 20ms fault blanking enables the circuit to ignore transient faults, such as those caused when hot swapping a capacitive load, preventing false alarms to the host system. The MAX1558/MAX1558H also feature reverse-current protection circuitry to block current flow from the output to the input when the switches are off. The MAX1558/MAX1558H are available in space-sav- ing 3mm x 3mm, 10-pin TDFN packages. The MAX1558 is enabled with an active-low signal, and the MAX1558H is enabled with an active-high signal.

File format: PDF Size:239 KB

The MAX4836/MAX4837 family of low-dropout (LDO) linear regulators feature an accurate current-limiting switch with an integrated FLAG or RESET function. These devices operate from 2.5V to 5.5V and deliver up to 500mA of load current at a preset output voltage. Preset output voltage levels are 1.8V/2.5V/2.8V/3.0V/3.3V. The MAX4836/MAX4837 offer a programmable soft- start control function to eliminate false reset during startup. The MAX4836 provides a FLAG function to noti- fy the system when the load current exceeds the limit. The MAX4837 provides a RESET function to notify the system when the output drops below the threshold. Additionally, reverse-current protection prevents cur- rent flowing from the output to the input. Other features include a low 90µA quiescent current, a 0.1µA shut- down current. The MAX4836/MAX4837 are available in space-saving 6-pin SOT23 and TDFN packages. Each device is speci- fied over the -40°C to +85°C extended temperature range. Contact factory for other programmed output volt- age versions from 1.5V to 3.3V in 100mV increments. For pin-compatible 100mA versions of this device, refer to the MAX4832/MAX4833. For pin-compatible 250mA versions of this device, refer to the MAX4834/MAX4835.

File format: PDF Size:352 KB

The MAX4995A/MAX4995AF/MAX4995AL/MAX4995B/MAX4995C programmable current-limit switches feature internal current limiting to prevent damage to host devices due to faulty load conditions.

File format: PDF Size:343 KB

The MAX1564 is a triple, current-limited USB switch with a space-saving package and multiple protection features. It can supply up to 1.2A of current from each output.

File format: PDF Size:220 KB

The MAX14523A/MAX14523AL/MAX14523B/MAX14523C programmable current-limit switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These current-limit switches feature a low 70mΩ on-resistance and operate from a +1.7V to +5.5V input voltage range. The current limit is adjustable from 250mA to 1.5A, making these devices ideal for SDIO (secure digital input/output) and other load-switching applications. Each device in the family handles an overcurrent event differently depending on the option selected. The MAX14523A/MAX14523AL go into an autoretry mode, the MAX14523B latches off the switch, and the MAX14523C features a continuous current-limit mode. Additional safety features include thermal shutdown to prevent overheating and reverse-current blocking to prevent current from being driven back into the source. The MAX14523A/MAX14523AL/MAX14523B/MAX14523C are available in a tiny 8-pin, 3mm x 3mm, TDFN pack- age and operate over the -40°C to +125°C automotive temperature range.

File format: PDF Size:344 KB

MAX1715 is a PWM controller produced by Maxim Company for notebook computers. It can convert high-voltage batteries into low-voltage CPU core, I/O and chipset RAM power supplies in a high-efficiency, fast response and high accuracy manner.

File format: PDF Size:291 KB

MAX4526/MAX4527 are CMOS analog ICs configured as phase-reversal switches. The MAX4526 is optimized for high-speed applications, such as chopper amplifiers, while the MAX4527 is optimized for low-power applications. The MAX4526/MAX4527 operate from a +4.5V to +36V single supply or ±4.5V to ±18V dual supplies. On-resistance (175Ω max) is matched between switches to 8Ω maximum. Each switch can handle rail-to-rail analog signals. Maximum leakage current is only 0.5nA at +25°C and 10nA at +85°C. All digital inputs have 0.8V to 2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility.

File format: PDF Size:112 KB

The MAX4528 is a low-voltage, CMOS analog IC configured as a phase-reversal switch and optimized for high-speed applications such as chopper amplifiers. It operates from a +2.7V to +12V single supply or from ±2.7V to ±6V dual supplies. On-resistance (110Ω max) is matched between switches to 7Ω (max). Each switch can handle Rail-to-Rail® analog signals. The leakage current is only 0.5nA at +25°C and 20nA at +85°C. All digital inputs have 0.8V to 2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility. For higher voltage operation, see the MAX4526/ MAX4527 data sheet.

File format: PDF Size:153 KB

The MAX4578/MAX4579 are high-voltage, 8-channel CMOS multiplexers. The MAX4578 and dual 4-channel MAX4579 are ideal for precision ADC calibration and system self-monitoring applications. These calibration multiplexers (cal-muxes) have precision resistor- dividers to generate accurate voltage ratios from an input reference voltage. The reference ratios include 15/4096 and 4081/4096 of the external reference voltage, accurate to 15 bits, and 1/2(V+) and 5/8(V+ - V-), accurate to 8 bits. The external reference voltage as well as ground can also be switched to the output. The MAX4578/MAX4579 have enable inputs and address latching. All digital inputs have 0.8V and 2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility when using a single +12V or dual ±15V supplies. Protection diodes at all inputs provide >2kV ESD rating. The MAX4578/MAX4579 operate from a single +4.5V to +36V supply or from dual supplies of ±4.5V to ±20V. On-resistance (350Ω max) is matched between switches to 15Ω max. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is 20pA at TA = +25°C and 1.25nA at TA = +85°C. The MAX4578/MAX4579 are available in small 20-pin SSOP, SO, and DIP packages.

File format: PDF Size:178 KB

The MAX5092_/MAX5093_ series low-quiescent-current, low-dropout (LDO) regulators contain simple boost preregulators operating at a high frequency.

File format: PDF Size:1026 KB

MAX378/MAX379 8/4 channel single-ended/differential switch with fault protection

File format: PDF Size:105 KB