MAXIM Manuals (Others)

The MAX4613 is a low-voltage switch from Texas Instruments, with four channels, fast switching speed, low switch resistance, low leakage current, strong anti-static ability, and is widely used in various electronic products.

File format: PDF Size:248 KB

MAX4530/MAX4531/MAX4532 are low-voltage, CMOS analog ICs configured as an 8-channel multiplexer (mux) (MAX4530), two 4-channel muxes (MAX4531), and three single-pole/double-throw switches (MAX4532). These devices are pin compatible with the industry-standard 74HC4351/74HC4352/74HC4353. All devices have two complementary switch-enable inputs and address latching. The MAX4530/MAX4531/MAX4532 operate from a sin- gle supply of +2V to +12V, or from dual supplies of ±2V to ±6V. On-resistance (150Ω max) is matched between switches to 8Ω max. Each switch can handle rail-to-rail analog signals. Off-leakage current is only 1nA at TA = +25°C and 50nA at TA = +85°C. All digital inputs have 0.8V and 2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility when using ±5V or a single +5V supply.

File format: PDF Size:452 KB

The document introduces the characteristics and functions of the MAX4536/MAX4537/MAX4538 series of low-voltage quad single-pole/single-throw (SPST) switches, including their application scenarios, operating voltage, switch resistance, leakage current, etc.

File format: PDF Size:119 KB

The MAX4551/MAX4552/MAX4553 are quad, low-volt- age, single-pole/single-throw (SPST) analog switches. Each switch is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup or damage. On-resistance (100Ω max) is matched between switch- es to 4Ω max, and is flat (8Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® ana- log signals. The off-leakage current is only 1nA at +25°C and 10nA at +85°C. The MAX4551 has four normally closed (NC) switches, and the MAX4552 has four normally open (NO) switch- es. The MAX4553 has two NC and two NO switches. These CMOS switches can operate with dual power supplies ranging from ±2V to ±6V or a single supply between +2V and +12V. They are fully specified for sin- gle +2.7V operation. All digital inputs have +0.8V and +2.4V logic thresh- olds, ensuring TTL/CMOS-logic compatibility when using ±5V or a single +5V supply.

File format: PDF Size:325 KB

The MAX4511/MAX4512/MAX4513 are quad, single- pole/single-throw (SPST), fault-protected analog switch- es.

File format: PDF Size:539 KB

The DG202/DG212 are normally open, quad single-pole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with power supplies ranging from ±4.5V to ±18V. Maxim guarantees that these switches will not latch up if the power supplies are disconnected with input signals still connected. The DG202/DG212 are similar to the DG201/DG211 except for inverted control inputs. All devices have guaranteed break-before-make switching, as well as essentially constant on-resistance over the analog signal range. All switches conduct current in either direction and add no offset to the output signal. Compared to the original manufacturer’s products, Maxim’s DG202/DG212 consume very little power, making them better suited for portable applications. Maxim has also eliminated the need for the third logic power supply (VL) that is required for the operation of the original manufacturer’s DG212 without sacrificing compatibility.

File format: PDF Size:1340 KB

Please contact Maxim/Dallas Direct! for pricing, delivery, and ordering information 1-888-629-4642 or visit Maxim’s website at www.maxim-ic.com.

File format: PDF Size:2084 KB

Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of-8 multiplexer. These devices can operate as multiplexers or demultiplexers. The DG528/DG529 have break-before-make switching to prevent momentary shorting of the input signals. Each device operates with dual supplies (±4.5V to ±20V) or a single supply (+5V to +30V). All logic inputs are TTL and CMOS compatible. The Maxim DG528/DG529 are pin and electrically compatible with the industry-standard DG528/DG529.

File format: PDF Size:116 KB

The DG506A/DG507A are monolithic CMOS analog multiplexers from Maxim. The DG506A is a single 16-channel (1 of 16) multiplexer and the DG507A is a differential 8-chan- nel (2 of 16) multiplexer. Both devices feature break-before-make switching. Maxim guarantees that these multiplexers will not latch- up if the power supplies are turned off with the input signals still present as long as absolute maximum ratings are not violated. The multiplexers operate over a wide range of power supplies from Q4.5V to Q18V. Compared to the original manufacturer’s devices, Maxim’s DG506A/DG507A consume significantly less power, making them ideal for portable equipment.

File format: PDF Size:821 KB

File format: PDF Size:247 KB

File format: PDF Size:148 KB

The DG421/DG423/DG425 are precision, dual CMOS switches with latchable logic inputs that simplify inter- facing with microprocessors (µPs). The single-pole/single- throw DG421 and double-pole/single-throw DG425 are normally open dual switches. The dual, single- pole/double-throw DG423 has two normally open and two normally closed switches. Fast switching, low switching voltage and low switching current.

File format: PDF Size:133 KB

File format: PDF Size:143 KB

DG201A/DG211 are quad single-pole single-throw (SPST) analog switches with a power supply range of ±4.5V to ±18V.

File format: PDF Size:513 KB

MAX328/MAX329 are monolithic CMOS analog multiplexers with ultra-low off- and on-leakage, low power dissipation, high耐压, bidirectional operation. They are suitable for control systems, data logging systems, aircraft heads-up displays, data acquisition systems and other applications.

File format: PDF Size:245 KB

File format: PDF Size:328 KB

MAX4558/MAX4559/MAX4560 are low-voltage, CMOS analog ICs configured as an 8:1 multiplexer (MAX4558), a dual 4:1 multiplexer (MAX4559), and a triple single-pole/double-throw (SPDT) switch (MAX4560). Each switch is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup or damage. These CMOS devices can operate continuously from ±2V to ±6V of dual supplies or from a +2V to +12V single supply. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 1nA at +25°C or 10nA at +85°C max. All digital inputs have +0.8V to +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using a single +5V supply or dual ±5V supplies.

File format: PDF Size:305 KB

This document introduces the MAX4604/MAX4605/MAX4606 switch.

File format: PDF Size:264 KB

MAX4667/MAX4668/MAX4669 are MAXIM's three dual analog switches, with low on-resistance (2.5 ohms max), on-resistance matching (0.5 ohms max) and voltage range consistency (0.5 ohms max). Each switch can handle Rail-to-Rail® analog signals. The switch-off current is only 5nA max at +85°C. These analog switches are ideal for low distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have low power requirements, occupy less board space and are more reliable than mechanical relays. MAX4667 has two normally closed (NC) switches, MAX4668 has two normally open (NO) switches and MAX4669 has one NC and one NO switch to ensure break-before-make operation. These switches can operate from a +4.5V to +36V single supply or from ±4.5V to ±20V dual supplies. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using ±15V supplies or a single +12V supply.

File format: PDF Size:164 KB

File format: PDF Size:0 KB