ST Manuals

M48T02 M48T12 5.0 V, 16 Kbit (2 Kb x 8) TIMEKEEPER® SRAM is a low power real-time clock chip from ST company. It features BCD coded year, month, day, date, hours, minutes and seconds. The typical clock accuracy is ±1 minute/month at 25°C and supports software controlled clock calibration and automatic power-fail chip deselect and write protection.

File format: PDF Size:375 KB

The NE556, SA556 and SE556 are dual monolithic timing circuits with high stability controllers capable of producing accurate time delays or oscillation.

File format: PDF Size:515 KB

The NE555, SA555, and SE555 monolithic timing circuits are highly stable controllers capable of producing accurate time delays or oscillation.

File format: PDF Size:1178 KB

This document provides information on a product that is still in production but not recommended for new designs. The product is a 256 Kbit serial I²C bus EEPROM with two chip enable lines, designated as M24256-A. It is compatible with I2C extended addressing, supports 400 kHz protocol, and has features such as single supply voltage, hardware write control, and more.

File format: PDF Size:159 KB

M24256-A 256 Kbit Serial I C Bus EEPROM is a Microchip product that is compatible with I2C extended addressing and supports the 400 kHz protocol.

File format: PDF Size:127 KB

The M24164 is a 16 Kbit (2048 x 8) electrically erasable programmable memory (EEPROM) accessed by an I2C-compatible bus. It supports a two-wire I2C serial interface with a 400 kHz protocol. The device operates on a single supply voltage of 4.5V to 5.5V for M24164 or 2.5V to 5.5V for M24164-W. It features write control input, byte and page write (up to 16 bytes), random and sequential read modes, self-timed programming cycle, automatic address incrementing, enhanced ESD/latch-up behavior, more than 1 million erase/write cycles, and more than 40 years of data retention.

File format: PDF Size:107 KB

The M24164 is a 16Kbit (2048 x 8) electrically erasable programmable memory (EEPROM) accessed by an I2C-compatible bus.

File format: PDF Size:107 KB

This document introduces the features of 256Kbit and 128Kbit Serial I²C Bus EEPROM With Three Chip Enable Lines, including compatible with I2C Extended Addressing, Two Wire I2C Serial Interface Supports 400 kHz Protocol, Single Supply Voltage, Hardware Write Control, BYTE and PAGE WRITE, RANDOM and SEQUENTIAL READ Modes, Self-Timed Programming Cycle, Automatic Address Incrementing, Enhanced ESD/Latch-Up Behavior, More than 100,000 Erase/Write Cycles, More than 40 Year Data Retention

File format: PDF Size:170 KB

M24256-B and M24128-B are two 256/128Kbit I2C bus EEPROMs with three chip enable lines, compatible with I2C extended addressing, support 400kHz protocol, single supply voltage 4.5V to 5.5V, can perform byte and page write (up to 64 bytes), support random and sequential read modes, self-timed programming cycle, automatic address incrementing, enhanced ESD/Latch-Up behavior, 100000 erase/write cycles (minimum), 40 years of data retention (minimum).

File format: PDF Size:120 KB

The TDA7498 is a dual BTL class-D audio amplifier with single power supply designed for home systems and active speaker applications. It features 100-W + 100-W output power, wide-range single-supply operation, high efficiency, four selectable fixed gain settings, differential inputs to minimize common-mode noise, standby and mute features, short-circuit protection, and thermal overload protection.

File format: PDF Size:733 KB

File format: PDF Size:0 KB

TDA7498L is a dual BTL class-D audio amplifier with single power supply designed for home systems and active speaker applications. It comes in a 36-pin PowerSSO package with exposed pad up (EPU) to facilitate mounting a separate heatsink.

File format: PDF Size:970 KB

The TDA7498MV is a mono BTL class-D audio amplifier with single power supply designed for home systems and active speaker applications.

File format: PDF Size:789 KB

STA369BWS is a 2.1-channel 40-watt high-efficiency digital audio system with wide-range supply voltage, three power output configurations, FFX, optional 100-dB SNR and dynamic range, optional 32- to 192-kHz input sample rates, I2C control and optional dual-band anti-clipper (B2DRC) or optional global DRC capability.

File format: PDF Size:2755 KB

File format: PDF Size:0 KB

STA335ML is a highly integrated 2-channel digital audio system that integrates digital audio processing and high-efficiency power amplification, without the need for an external microcontroller.

File format: PDF Size:1106 KB

The STA533WF is a 18-volt, 3-amp, quad power half-bridge. It features Multipower BCD technology, low input/output pulse width distortion, 200-mΩ RdsON complementary DMOS output stage, CMOS-compatible logic inputs, thermal protection, thermal warning output, undervoltage protection, and short-circuit protection.

File format: PDF Size:253 KB

The TS4604 is a stereo headset driver and analog audio line driver with integrated reference to ground. It operates from a single supply of 3V to 4.8V and comes in a space-saving TSSOP28 package with external gain setting resistors and dedicated shutdown control. The driver provides 100mW headset drive into a 16Ω load and has a high PSRR of 90dB on the headset drive. It also features internal undervoltage mute, pop-and-click reduction circuitry, thermal shutdown, and output short-circuit protection.

File format: PDF Size:645 KB

STA559BW is a 5-volt, 2-amp, 2.1-channel high-efficiency digital audio system. It features a wide range of supply voltage, multiple power output configurations, FFX with high SNR and dynamic range, selectable input sample rates, I2C control, and more.

File format: PDF Size:2095 KB

This document describes the features and characteristics of the STA540SAN 4 x 10-watt dual/quad power amplifier, including high output power capability, minimum external component count, standby function, and protection and diagnostic functions.

File format: PDF Size:693 KB