MAXIM Manuals

MAX9875 is a high-efficiency Class D audio power amplifier with a built-in stereo AB-class capacitor-less DirectDrive headphone amplifier. This amplifier uses Maxim's third-generation filterless Class D amplifier technology with active emissions limiting technology to provide Class AB performance with Class D efficiency. The MAX9875 can provide up to 725mW of power from a 3.7V supply to an 8Ω load with an efficiency of 87%, extending battery life. The filterless modulation scheme combined with active emissions limiting circuitry and spread-spectrum modulation greatly reduces EMI while eliminating the need for output filtering used in traditional Class D devices. The stereo AB-class headphone amplifier in the MAX9875 uses Maxim's DirectDrive architecture, which produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space and component height. The device uses a user-defined input architecture, three preamplifier gain settings, an input mixer, volume control, comprehensive click-and-pop suppression and I2C control. The MAX9875 is available in a thermally efficient, space-saving 20-bump WLP package.

File format: PDF Size:491 KB

The document introduces the MAX97000 audio subsystem. The subsystem includes a mono Class D speaker amplifier and a Class H headphone amplifier, as well as an analog DPST switch. The subsystem is designed for maximum efficiency, high gain, low power consumption and low distortion. It is suitable for applications such as cell phones and portable multimedia players.

File format: PDF Size:3394 KB

The MAX97002 is an integrated audio subsystem with mono Class D speaker and Class H headphone amplifiers. The speaker amplifier supports 700mW output power and the headphone amplifier supports 2.5V headphone output. It supports low power shutdown mode and uses 2-wire I2C interface for control.

File format: PDF Size:3103 KB

MAX97001 is a mono audio subsystem that combines a mono speaker amplifier with a stereo headphone amplifier and an analog DPST switch. It features independent volume control and on/off control for the headphone and speaker amplifiers. The 4 inputs can be configured as 2 differential inputs or 4 single-ended inputs. The MAX97001 is designed for maximum efficiency, with a low-power Class D speaker amplifier and a dual-mode charge pump for the headphone amplifier. The speaker amplifier includes a distortion limiter to automatically reduce volume level during excessive clipping. Control is performed using the 2-wire I2C interface.

File format: PDF Size:3113 KB

The MAX97003 is a high-efficiency, low-noise audio subsystem that combines a mono speaker amplifier with a stereo headphone amplifier. The headphone and speaker amplifiers have independent volume and on/off controls. The four inputs can be configured as two differential or four single-ended inputs. To minimize output noise, both the headphone and speaker outputs utilize a downward expander/noise gate to attenuate noise when no desired input signal is present. The speaker output incorporates an adjustable dynamic range compressor (DRC) and distortion limiter to protect the speaker and maximize loudness. This allows high gain for low-level signals without compromising the quality of large signals. All controls are performed using the two-wire I2C interface. The IC operates in the extended -40°C to +85°C temperature range, and is available in the 2.0mm x 2.4mm, 20-bump WLP package (0.4mm pitch). Applications include cell phones and portable media players.

File format: PDF Size:4002 KB

The MAX9730 is a mono Class G power amplifier with an integrated inverting charge-pump power supply. The charge pump can supply up to 500mA of peak output current over a 2.7VDC to 5.5VDC supply voltage range, guaranteeing up to 2.4W output power into an 8Ω load. The MAX9730 maximizes battery life by offering high-performance efficiency. Maxim’s proprietary output stage provides efficiency levels greater than Class AB devices without the EMI penalties commonly associated with Class D amplifiers. High efficiency allows the MAX9730 to be packaged in a WLP package without derating the output power handling capability. The device utilizes fully differential inputs and outputs, comprehensive click-and-pop suppression, shutdown control, and soft-start circuitry. The MAX9730 is fully specified over the -40°C to +85°C extended temperature range and is available in ultra-small, lead-free, 20-bump WLP (2mm x 2.5mm) and 28-pin TQFN (4mm x 4mm) packages.

File format: PDF Size:190 KB

The MAX9788 features a mono Class G power amplifier with an integrated inverting charge-pump power supply specifically designed to drive the high capacitance of a ceramic loudspeaker. The charge pump can supply greater than 700mA of peak output current at 5.5VDC, guaranteeing an output of 14VP-P. The MAX9788 maximizes battery life by offering high- performance efficiency. Maxim’s proprietary Class G output stage provides efficiency levels greater than Class AB devices without the EMI penalties commonly associated with Class D amplifiers. The MAX9788 is ideally suited to deliver the high out- put-voltage swing required to drive ceramic/piezoelec- tric speakers. The device utilizes fully differential inputs and outputs, comprehensive click-and-pop suppression, shutdown control, and soft-start circuitry. The MAX9788 is fully spec- ified over the -40°C to +85°C extended temperature range and is available in small lead-free 28-pin TQFN (4mm x 4mm) or 20-bump WLP (2mm x 2.5mm) packages.

File format: PDF Size:198 KB

File format: PDF Size:0 KB

The MAX98500 is a high-efficiency, Class D audio amplifier that features an integrated boost converter to deliver a constant output power over a wide range of battery supply voltages. It has automatic level control with a battery tracking function that reduces the output swing as the supply voltage drops, preventing collapse of battery voltage. The MAX98500 also features three selectable gain settings. This product is suitable for applications such as cell phones, smartphones, GPS devices, mobile internet devices, and active speaker accessories.

File format: PDF Size:1654 KB

MAX9712 is a single-channel D class audio power amplifier that delivers Class AB amplifier performance with Class D efficiency, conserving board space and extending battery life. Using a class D architecture, the MAX9712 delivers up to 500mW into an 8Ω load while offering efficiencies above 85%.

File format: PDF Size:577 KB

The MAX9700 is a single-channel D class audio power amplifier that provides class AB amplifier performance with class D efficiency, conserving board space and extending battery life. Using a class D architecture, the MAX9700 delivers 1.2W into an 8Ω load while offering efficiencies above 90%. A low-EMI modulation scheme renders the traditional class D output filter unnecessary. The MAX9700 offers two modulation schemes: a fixed-frequency (FFM) mode, and a spread-spectrum (SSM) mode that reduces EMI-radiated emissions due to the modulation frequency. Furthermore, the MAX9700 oscillator can be synchronized to an external clock through the SYNC input, allowing the switching frequency to be user defined. The SYNC input also allows multiple MAX9700s to be cascaded and frequency locked, minimizing interference due to clock intermodulation. The device utilizes a fully differential architecture, a full-bridged output, and comprehensive click-and-pop suppression. The gain of the MAX9700 is set internally (MAX9700A: 6dB, MAX9700B: 12dB, MAX9700C: 15.6dB, MAX9700D: 20dB), further reducing external component count. The MAX9700 features high 72dB PSRR, a low 0.01% THD+N, and SNR in excess of 90dB. Short-circuit and thermal-overload protection prevent the device from damage during a fault condition. The MAX9700 is available in 10-pin TDFN (3mm ✕ 3mm ✕ 0.8mm), 10-pin µMAX®, and 12-bump UCSP™ (1.5mm ✕ 2mm ✕ 0.6mm) packages. The MAX9700 is specified over the extended -40°C to 125°C temperature range.

File format: PDF Size:357 KB

The MAX9713/MAX9714 are filterless Class D audio power amplifiers from MAXIM that provide Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink.

File format: PDF Size:555 KB

The MAX9703/MAX9704 mono/stereo Class D audio power amplifiers provide Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink.

File format: PDF Size:3096 KB

MAX9715 is the second generation of Maxim's high efficiency Class D audio power amplifier, providing up to 2.8W per channel into a 4Ω speaker with a 5V supply.

File format: PDF Size:338 KB

The MAX9759 is a single-channel D-Class audio power amplifier that provides Class AB amplifier audio performance with the benefits of Class D efficiency, eliminating the need for a heatsink and extending battery life. The MAX9759 delivers up to 3.2W of continuous power into a 4Ω load while offering greater than 90% efficiency. Maxim’s next-generation, low-EMI modulation scheme allows the amplifier to operate without an external LC filter while still meeting FCC EMI-radiated emission levels. The MAX9759 offers two modulation schemes: a fixed-frequency modulation (FFM) mode and a spread-spectrum modulation (SSM) mode. The SSM mode flattens the wideband spectral components, reducing EMI-radiated emissions due to the modulation frequency. Furthermore, the MAX9759 oscillator can be synchronized to an external clock through the SYNC input, allowing the switching frequency to range from 1000kHz to 1600kHz. The SYNC input and SYNC_OUT output of the MAX9759 allow multiple Maxim Class D amplifiers to be cascaded and frequency locked, minimizing interference due to clock intermodulation. The MAX9759 utilizes fully differential input amplifiers, a full-bridged output, comprehensive click-and-pop suppression, and features four selectable gain settings (6dB, 12dB, 18dB, 24dB). The MAX9759 features high 81dB PSRR, low 0.02% THD+N, and SNR in excess of 90dB. Short-circuit and thermal-overload protection prevents damage to the device during a fault condition. The MAX9759 op

File format: PDF Size:722 KB

The MAX9708 is a single/stereo, Class D audio power amplifier from MAXIM that delivers up to 2 x 21W of output power in stereo mode to an 8Ω load and 1 x 42W of output power in mono mode to a 4Ω load, while offering up to 87% efficiency. The MAX9708 provides Class AB amplifier performance with the benefits of Class D efficiency, eliminating the need for a bulky heatsink and conserving power. The MAX9708 operates from a single +10V to +18V supply, driving the load in a BTL configuration. The MAX9708 offers two modulation schemes: a fixed-frequency modulation (FFM) mode, and a spread-spectrum modulation (SSM) mode that reduces EMI-radiated emissions. The MAX9708 can be synchronized to an external clock from 600kHz to 1.2MHz. A synchronized output allows multiple units to be cascaded in the system. Features include fully differential inputs, comprehensive click-and-pop suppression, and four selectable-gain settings (22dB, 25dB, 29.5dB, and 36dB). A pin-programmable thermal flag provides seven different thermal warning thresholds. Short-circuit and thermal-overload protection prevent the device from being damaged during a fault condition. The MAX9708 is available in 56-pin TQFN (8mm x 8mm x 0.8mm) and 64-pin TQFP (10mm x 10mm x 1.4mm) packages, and is specified over the extended -40°C to +85°C temperature range. Applications include LCD TVs, PDP TVs, Automotive and PC/HiFi Audio Solutions.

File format: PDF Size:679 KB

The MAX9709 is a Class D audio power amplifier from Texas Instruments. It offers high efficiency, low power consumption, and high output power.

File format: PDF Size:486 KB

The MAX9701 stereo Class D audio power amplifier provides Class AB amplifier audio performance with the benefits of Class D efficiency, eliminating the need for a heatsink while extending battery life. The MAX9701 delivers up to 1.3W per channel into an 8Ω load while offering 87% efficiency. Maxim’s next-generation, low-EMI modulation scheme allows the amplifier to operate without an external LC filter while still meeting FCC EMI emission levels. The MAX9701 offers two modulation schemes: a fixed-frequency (FFM) mode, and a spread-spectrum (SSM) mode that reduces EMI-radiated emissions. The MAX9701 oscillator can be synchronized to an external clock through the SYNC input, allowing synchronization of multiple Maxim Class D amplifiers. The sync output (SYNC_OUT) can be used for a master-slave application where more channels are required. The MAX9701 features a fully differential architecture, a full bridge-tied load (BTL) output, and comprehensive click-and-pop suppression. The device features internally set gains of 0dB, 6dB, 12dB, and 18dB selected through two gain-select inputs, further reducing external component count. The MAX9701 features high 80dB PSRR, less than 0.1% THD+N, and SNR in excess of 88dB. Short-circuit and thermal-overload protection prevent the device from being damaged during a fault condition. The MAX9701 is available in 24-pin thin QFN-EP (4mm x 4mm x 0.8mm) and 20-bump UCSP™ (2mm x 2.5mm x 0.6mm) packages.

File format: PDF Size:591 KB

The MAX9741 stereo Class D audio power amplifier provides Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink. Using a high-efficiency Class D architecture, it delivers 12W continuous output power into 8Ω loads. Proprietary modulation and switching schemes render the traditional Class D EMI suppression output filter unnecessary. The MAX9741 offers two modulation schemes: a fixed-frequency mode (FFM), and a spread-spectrum mode (SSM) that reduces EMI-radiated emissions. The device utilizes a fully differential architecture, a full bridged output, and offers comprehensive click-and-pop suppression. The MAX9741 features high 80dB PSRR, low 0.1% THD+N, and SNR in excess of 100dB. Short-circuit and thermal-overload protection prevent the device from being damaged during a fault condition. The MAX9741 is available in a 56-pin TQFN (8mm x 8mm x 0.8mm) package. The MAX9741 is specified over the extended -40°C to +85°C temperature range.

File format: PDF Size:1048 KB

The MAX9742 is a 16W, Class D stereo amplifier from MAXIM that operates from a single or dual supply. The maximum output power is 2 x 16W into a 4Ω load and the input impedance is fully differential. The MAX9742 features a variety of protection functions, including short-circuit and thermal overload protection. It is also available in a space-saving 36-pin TQFN package.

File format: PDF Size:762 KB